3Com PhazerLInk Upgrade Kit Z340PL user manual

Device: 3Com PhazerLInk Upgrade Kit Z340PL

Category: Dishwasher

Manufacturer: 3Com

Size: 0.22 MB

Added : 6/6/2013

Number of pages: 6

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for 3Com PhazerLInk Upgrade Kit Z340PL. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with 3Com PhazerLInk Upgrade Kit Z340PL.

For your convenience

If looking through the 3Com PhazerLInk Upgrade Kit Z340PL user manual directly on this website is not convenient for you, there are two possible solutions:

Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual 3Com PhazerLInk Upgrade Kit Z340PL on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual 3Com PhazerLInk Upgrade Kit Z340PL to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.

3Com PhazerLInk Upgrade Kit Z340PL User manual - Online PDF

« Page 1 of 6 »

Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual 3Com PhazerLInk Upgrade Kit Z340PL but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to 3Com PhazerLInk Upgrade Kit Z340PL. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents

Summary of the content on the page No. 1

Instruction Sheet
®
Phaser 340
®
Phaser 340 Plus
PhaserLink™ Upgrade for the Phaser 340 —
Upgrade Kit Z340PL
This kit provides the components to give your printer PhaserLink™ capabilities. With PhaserLink
ﬁrmware installed in your printer you can monitor and administer your printer using a World Wide Web
browser. Printer’s serial-numbered BCxxxxx and above already have PhaserLink software installed.
Network card ﬁrmware version. Your printer must have Phas

Summary of the content on the page No. 2

PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Important! About the printer’s IP address Upgrading the printer will erase the printer’s IP address from the printer’s non-volatile memory. Therefore you should print the printer’s conﬁguration page, which lists the printer’s IP address, before upgrading the printer. 1. While the printer is idle, press the Menu button to scroll to the Help pages menu item. 2. Press the arrow button to scroll to the

Summary of the content on the page No. 3

PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Upgrading the printer Removing the main board Caution Do not tilt the printer. If you must move the printer to access the rear of the printer to install the upgrade, be careful not to tip or tilt the printer. Hot, liquid ink in the printer could spill and damage the printer. Once the printer is turned off, it takes 30 minutes for the ink to cool to its solid state. Wait and allow the ink to cool. 1. Turn off the pr

Summary of the content on the page No. 4

P71 PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Replacing the PostScript code ROM SIMM 3. Remove the currently installed PostScript code ROM SIMM in connector P71 by spreading apart the hook-like metal pawls securing each end of the SIMM in its connector. Remove the SIMM. To protect the SIMM from static electricity, slip it immediately inside an anti-static bag. 4. Insert the new PostScript code ROM SIMM in connector P71 (a), and tilt the SIMM down until it l

Summary of the content on the page No. 5

PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL Replacing the print engine ROM 5. Locate the print engine ROM on the main board. Note Some products may use a standard ROM IC chip while others may use an adaptor circuit board (as show in the illustration below). Either part type can be substituted for the other on this main board. Also note that there are two versions of the new print engine ROM: If you ordered the upgrade kit Z340PL Option 1, you have the ROM

Summary of the content on the page No. 6

PhaserLink™ Upgrade for the Phaser 340 — Upgrade Kit Z340PL 8. Check for proper orientation and alignment of the pins; pin 1 should be oriented toward the network card end of the main board. Also ensure the bins are not bent. Gently install the new ROM in its socket. Carefully, inspect the ROM to ensure all the pins are properly inserted in the socket and are not bent or mis-installed. 9. Reinstall the main board into the printer; tighten the thumbscr

Alternative user manuals

#	User manual	Category	Download
1	3Com Bard Manufacturing Company 43506 User manual	Dishwasher	1
2	3Com BayStack 22 PC Card Adapter 206380-A User manual	Dishwasher	1
3	3Com Database Adapter Module for NetWorker NSR-ORA V3.2 User manual	Dishwasher	0
4	3Com Maytage Neptune Dryer MD55 User manual	Dishwasher	5
5	3Com ViewSonic LCD Display VX710 User manual	Dishwasher	0
6	3Com SMARTBoard 800ix-SMO User manual	Dishwasher	0
7	3Com SMARTBoard 800ix-SMP User manual	Dishwasher	0
8	3Com 61-362 User manual	Dishwasher	0
9	Edelbrock 1108 User manual	Dishwasher	2
10	2JANE Professional loudspeakers VX Series User manual	Dishwasher	2
11	2Wire Epson PowerLite Projector 7900P User manual	Dishwasher	15
12	321 Studios DeviceNet Network Scanner DVP-0204520-03 User manual	Dishwasher	1
13	321 Studios CallManager Extended Services Administrator's Guide 78-12959-01 User manual	Dishwasher	0
14	3Com Bard Manufacturing Company 43506 User manual	Dishwasher	1
15	3Com BayStack 22 PC Card Adapter 206380-A User manual	Dishwasher	1