Johnson Hardware 200FD Series user manual

Summary of the content on the page No. 1

For 1-1/8" (29mm) to
1-3/4" (45mm) Panels
weighing up to 125 lbs. (57 kgs) each.
4/0 (1219mm) X 9/0 (2741mm)
Maximum Panel Size.
Para paneles de 29mm a 45mm
y de hasta 57kg cado uno.
Para paneles de hasta
R
1219mm * 2741mm
200FD SERIES FOLDING
Pour panneaux de
29mm a 45mm
www.johnsonhardware.com
pesant jusqu' à 57kg chacun.
DOOR HARDWARE SET
Pour panneaux jusq' à
1219mm * 2741mm
PREPARE OPENING CAREFULLY: MAKE SURE CORNERS ARE SQUARE,
HEADER IS LEVEL AND JAMBS ARE STRAIGHT.
PREPARE LA ABERTURA

Summary of the content on the page No. 2

CUT TRACK TO FIT OPENING WIDTH and fasten to header jamb with 1-1/4" (32mm) Pan Head Screws. 1 NOTE: INSERT PARTS IN TRACK BEFORE MOUNTING. CORTRE EL RIEL DE ACUERDO AL ANCHO DE APERTURA y ajústelo al encabezador de jamba con tomillos decabeza redonda de 32mm. NOTA: COLOQUE LAS PARTES EN EL RIEL ANTERS DE MONTARLO. COUPEZ LA GLISSIÈRE à la dimension de ľouverture et fixez la au montant du haut avec des visses à pans de 32mm. NOTE: INSEREZ LES PIECES DANS LA GLISSIERE AVANT DE F

Summary of the content on the page No. 3

HANG DOORS: (A) Insert 2001 Top Pivot located directly above the 2007 Bottom Pivot into 2010 Top Pivot Socket. Lock into 5 place with locking lever. (B) Insert other 2001 Top Pivot into the 2002 Hanger. Lock into place with locking lever. (C) Adjust 2007 Bottom Pivot into the 2011 Floor Bracket's pivot socket until you feel the 2007 Bottom Pivot touch bottom. DO NOT OVER TIGHTEN. A (D) Lock 2007 Bottom Pivot into place by tightening Hex Lock Nut up against base of bottom p

Summary of the content on the page No. 4

ATTACH KNOBS drill 3/16" (5mm) hole 36" (920mm) 8 from bottom, and in center of #2 and #3 doors. COLOQUE LAS PERILLAS perforando un orificio de 5mm a 920mm desde abajo y en el centro de las puertas #2 y #3. POUR FIXER LES POIGNÉES percez des trous de 5mm à 920mm du bas et au centre des poirtes #2 et #3. #1 #2 #3 #4 Other fine COMMERCIAL GRADE HARDWARE manufactured by JOHNSON HARDWARE. Otros productos finos de HERRAGE DE CALIDAD COMERCIAL PARA PUETRAS fabricados por JOHNSON HARDWARE.