Summary of the content on the page No. 1
USER’S MANUAL
Part 2
1
Tapeless Digital
Answering System
with Time/Day 1717
Fold open this manual for information
about this product’s installation
and operation. Please also read
Part 1 – Important Product Information.
AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
© 2000 Advanced American Telephones. All rights reserved.
Printed in Mexico. 850002593 Issue 1AT&T 5/00
Summary of the content on the page No. 2
INSTALLATION TEL LINE TEL SET Strain Telephone Relief Tab Set Cord Modular Standard Telephone Electrical Jack Outlet Power Cord Telephone Line Cord 3 Connect the power cord. 1 Connect the telephone line cord. Plug the power cord into the jack Plug one end of the telephone line labeled POWER and into an electrical cord into the jack labeled TEL LINE outlet not controlled by a wall switch. on the back of the system. Plug the Fit the power cord behind the strain other end into a modular telephone
Summary of the content on the page No. 3
OPERATION Displays number of messages and other information Adjust volume Set and hear Delete all time/day or selected messages Use with other buttons to change/hear settings Turn system on or off Record and play outgoing announcement / Skip all or part of a message Microphone Play/Stop messages Record a memo / Repeat all or part of a message PLAY Light indicates messages Setting the Clock Recording Your Announcement You’ll need to set the clock so that it can Before using this answering system,
Summary of the content on the page No. 4
OPERATION Press P to exit Answering Calls — OR — When the system answers a call, the caller The system will time out after 30 seconds hears the announcement you recorded, and save any changes already made. followed by a beep. After the beep, the system begins recording your caller’s Ring Select and Toll Saver message. A caller can leave a message up Use Ring Select to choose how many times to three minutes long. If the message is the line will ring before the system longer than three minutes,
Summary of the content on the page No. 5
OPERATION Announcement Monitor Saving Messages You can choose whether to hear the The system automatically saves your announcement when your system answers messages if you do not delete them. The a call, or have it silent (off) on your end system can save about 12 minutes of (your caller will still hear an messages, including your announcement, announcement). for a total of up to 59 messages. When memory is full, you must delete some or 1 Press and hold S. After the Ring all messages before n
Summary of the content on the page No. 6
REMOTE OPERATION Connect with the Deleting Messages Delete All Messages Answering System After you have listened to all messages and 1 Dial your telephone number from a heard the two beeps, press 3 3. touch tone phone with a different telephone number. Delete Selected Messages 2 When the system answers, enter your Press and release 3 while the message you three-digit Access Code during or want to delete is playing. after the announcement. The system announces the number of messages, Record Anno
Summary of the content on the page No. 7
REMOTE OPERATION Turn System Off Memory Full The system answers after 10 rings, then Press 0 0. announces “Memory is full,” and beeps Turn System On twice, you must delete messages to make room for new ones. When the system is off, it answers after 10 rings, announces “The machine is off,” and 1 Enter the Remote Access Code after beeps twice. two-beep signal. 1 Press 0 to turn the system on. 2 Listen to messages, and delete some or all of them. 2 The system beeps twice and is ready to answer cal
Summary of the content on the page No. 8
IN CASE OF DIFFICULTY If this answering system does not work System Does Not Respond To Remote properly, try the following suggestions. Commands If you’re still having difficulty, call • Make sure you are calling from a 1 800 222–3111. touch tone phone. When you dial a number, you should hear tones. If you Message Window Is Blank hear clicks instead, the phone is not a • Make sure the power cord is securely touch tone telephone. connected to both the answering • The answering system may not de
Summary of the content on the page No. 9
fold fold a a a aaaaaaaaaaaaaaaaaaaaaaaaaaa a a a aaaaaaaaaaaaaaaaaaaaaaaaaaa 1 1 Tapeless Digital Answering System 1717 Tapeless Digital Answering System 1717 Remote Commands Remote Commands To connect with your answering system: To connect with your answering system: 1 Dial your telephone number from a touch tone phone. 1 Dial your telephone number from a touch tone phone. 2 When the system answers, enter your Remote Access 2 When the system answers, enter your Remote Access Code. The system
Summary of the content on the page No. 10
ONE KEY REMOTE COMMANDS ONE KEY REMOTE COMMANDS Play All Play New Delete Play All Play New Delete Repeat Stop/Exit Skip Repeat Stop/Exit Skip System Record System Record On Memo On Memo TWO KEY REMOTE COMMANDS TWO KEY REMOTE COMMANDS Turn system off 0 0 Turn system off 0 0 Delete all messages 3 3 Delete all messages 3 3 Review announcement7 1 Review announcement7 1 Record announcement7 *, speak after beep, press 5 Record announcement7 *, speak after beep, press 5 to stop to stop Room monitor 9 8
