Summary of the content on the page No. 1
2
Tapeless Digital
Answering System
with Time/Day 1715
Fold open this manual for information
about this telephone's installation and
operation. Please read Part 1 —
Important Product Information,
included in this package.
Part 2
© 1998 Philips Consumer Communication L.P. All rights reserved.
Printed in Mexico. 848230124 Issue 1AT&T
Summary of the content on the page No. 2
IN CASE OF DIFFICULTY to two when you have new messages If this answering system does not work waiting. properly, try the following suggestions. • In some cases, the system might be If you’re still having difficulty, call affected by the ringing system used by 1 800 722-9125. the local telephone company. • If the system’s memory is full, or the Message Window Is Blank system is off, the system answers after • Make sure the power cord is securely 10 rings. connected to both the answering system a
Summary of the content on the page No. 3
INST ALLA TION 1 Connect the line cord. 3 Connect the power cord. Plug one end of the telephone line cord Plug the power cord into the jack labeled into the jack labeled TEL LINE on the POWER and into an electrical outlet not back of the system. Plug the other end into controlled by a wall switch. Fit the power cord behind the strain relief tab. The a phone wall jack. Message Window flashes CL to indicate that you need to set the clock. 2 Connect the telephone. NOTE: If you do not want to co
Summary of the content on the page No. 4
OPERA TION Record and hear outgoing Set and hear time/day announcement Displays number of messages, other indicators Leave a message Use with other buttons to change settings Turn system on or off Delete all or selected messages Select number of times line rings before system answers Set and hear Remote Access and Priority Calling Codes Microphone Skip all or part Play messages Repeat all or part of a message of a message Adjust volume Stop message playback 5 To change the hour setting, hold dow
Summary of the content on the page No. 5
OPERA TION the line will ring before the system answers a Recording Your Announcement call. Set to 2 for two rings, set to 4 for four Before using this answering system, you should rings, or set to TS for Toll Saver. When you set record the announcement (up to 3 minutes long) the system to TS, the system answers after 4 that callers will hear when the system answers rings when you have no new messages, and af- a call. If you choose not to record an announce- ter 2 rings when you have new mess
Summary of the content on the page No. 6
OPERA TION Skip to next message — Press and release When Memory is Full /. The system can record approximately 12 Skip part of a message — Hold down minutes of messages, including your / for a few seconds, then release it announcement, for up to a total of 99 to resume playing. The system beeps while messages. When memory is full, or 99 the button is held down. messages have been recorded, the Message Stop message playback — Press and Window flashes F. Delete messages to make release S. room
Summary of the content on the page No. 7
REMOTE OPERATION Playing Messages Room Monitor with Intercom 1 Dial your telephone number from a touch You can call the answering system and listen to tone phone. any activity in the room. 2 When the system answers, enter your 1 Press 9, 1 to listen for 30 seconds. Remote Access Code. The system 2 If you wish, you can press 1 while announces the number of messages the monitor is active to speak to some- received, then beeps twice. one in the room (up to 30 seconds). 3 After the two beeps, wai
Summary of the content on the page No. 8
fold fold 2 2 Tapeless Digital Answering System 1715 Tapeless Digital Answering System 1715 Remote Commands Remote Commands Access Answering System Access Answering System 1 Dial your telephone number from a touch tone phone. 1 Dial your telephone number from a touch tone phone. 2 When the system answers, enter your Remote Access Code. 2 When the system answers, enter your Remote Access Code. The system announces the number of messages and beeps twice. The system announces the number of messages
Summary of the content on the page No. 9
REMOTE COMMAND PRESS REMOTE COMMAND PRESS Play all messages 1 Play all messages 1 Play only new messages 2 Play only new messages 2 Repeat message 4 while message is Repeat message 4 while message is playing playing Skip message 6 while message is Skip message 6 while message is playing playing Delete all messages 3, 3 Delete all messages 3, 3 Delete selected message 3 while message is Delete selected message 3 while message is playing playing Record announcement 7, *, speak, press 5 to Record a
