Gianni Industries 962 EZ-Plus user manual

Summary of the content on the page No. 1

962 EZ-Plus
2-Door Access Control System
Features
Simple and quick programming using a Master
tag.
The first Tag presented to the system will be
stored in the memory as Master Tag.
Programming functions:
Add Tags
Delete Tags
Clear Memory (Secure Tag Reader)
Adjust/Set Relay operating time
Lost Tags can be deleted using an optional tag
simulator in conjunction with the master tag.
Controller supports two readers
Controller can control 2 independent doors or a
single door (jumper setting)
Controll

Summary of the content on the page No. 2

2core 2core 2core 2core 2core 2core 962 EZ-Plus 2-Door Access Control System Application The door relay can be configured to operate in timed or toggle mode. Transactions are stored in the controllers non-volatile memory with a date & time stamp. The simple data logging software provided with the system allows a PC to set the controllers date&time settings and to download the transactions. Wiegand keypads with 26 bit output may be used in place of readers. Both devices must be of the same type i

Summary of the content on the page No. 3

16 89 962 EZ-Plus 2-Door Access Control System Specifications Optional Accessory Controller Tag Simulator Unit size: (L/W/H) 125 x 100 x 38 mm The Tag Simulator allows adding and removing any tag Operation temperature:-20°° C to +70 C number from the reader memory when that tag is lost or not available. One unit can be utilized at different sites Operation humidity: 5% - 95% relative but for security reasons it will operate only in humidity (non condensing) conjunction with the Master Tag. Volta