Peavey DJS 1800 user manual

Summary of the content on the page No. 1

DJS’” 1800
SPECIFICATIONS
Enclosure:
1800 System
Frequency Response:
Low Frequency Limit (-3 point):
40 Hz
Low Frequency Limit
point):
35 Hz
Power Handling:
350 watts continuous (37.4 volts RMS)
Sound Pressure Level 1 Watt at 1
Meter Swept Sine Input in
Environment:
98 dB
Maximum Sound Pressure Level:
121 dB
Radiation Angle Measured at -6
Point of Polar Response:
.6
92”
1.6 k-5
Enclosure Materials and Finish:
Crossover Frequency:
MDF cabinet, braced internally,
Vertical: 74”
covered

Summary of the content on the page No. 2

DJS 1800: Fig. 1 20.25” W H x diameter 90 80 Net Weight: 50 Hz 100 Hz 200 Hz 500 Hz 1 kHz PkHz 5 kHz 10 kHz 20 kHz Shipping Weight: Fig. 2 100 ohm DJS Pole Stand: 4 Ibs. kg) 31.5 ohm Additional Remarks: 10 ohm The 1800 Sub, DJS 1800, and DJS 3.15 ohm 1800 pole stand make up the DJS 1800 System. To prevent the risk of damage and injury, do not use the DJS 1800 pole stand to 50 Hz 100 Hz 200 Hz 500 Hz 1 kHz 2kHz 5 kHz 10 kHr 20 kHz support any product or system weighing in Fig. 3 excess of

Summary of the content on the page No. 3

HORIZONTAL POLAR PATTERNS 6 dB per division VERTICAL POLAR PATTERNS 6 dB per division -90.0” 90.0” 67.5 67.5’ 67.5”

Summary of the content on the page No. 4

range. Biamp input jacks are also meter with an input of one watt. The WARNING: TO PREVENT THE available for biamp applications. The nominal impedance shall be 4 ohms. RISK OF DAMAGE AND IN- specially voiced satellite speaker The continuous power handling shall be JURY, DO NOT USE THE projects into the audience via the 350 watts, maximum program power of POLE STAND TO satellite support pole stand while the 600 watts, with a minimum amplifier DJS 1800 Sub “pumps up” the bass SUPPORT ANY PRODUCT