Summary of the content on the page No. 1
User Instructions
American DJ®
MIGHTY
™
SCAN
Thank you for purchasing this American DJ® product. Some setup required.
Please read the following instructions before installing or using your new unit.
Important Notice:
HALOGEN LAMP WARNING!
This fixture follow the European DMX standard.
This fixture is fitted with a halogen lamp which is
When operating this fixture with a standard DMX
controller, the fixture’s DMX value will start on
highly susceptible to damage if improperly handled.
one (1) wit
Summary of the content on the page No. 2
Precautions: 1. Never operate unit when case is open. 2. Never cover unit as this may block air vents and cause overheating and possible fire hazard. 3. Never operate unit in the rain or in damp moist conditions as this could cause electric shock. 4. Follow standard electrical safety precautions when installing, operating or servicing the unit to prevent electrical shock, fire, or equipment damage. 5. Make sure head and yoke rotate freely 6. These units are for commercial use and contain no us
Summary of the content on the page No. 3
Operation Modes Important Notice: When setting or changing your dip switches it is best to discon- nect power so the unit can reset to the new settings. Stand Alone Operation: This operation is used to control one or more fixtures to the built in programs. Use this operation mode if; 1) You will not be using a DMX controller or 2) You do not wish to run your fixtures to sound or 3) You have more than one (1) Mighty Scan™ and you do not want to run them to a synchronized light show. 1. In Stan
Summary of the content on the page No. 4
4. You can adjust the amount of sensitivity the fixture takes to react to the beat of music by turning the adjustment pot on the top of the unit in a clockwise or counter-clockwise position. Clockwise will increase the sensitivity while counter-clockwise will decrease the sensitivity. Sound Active Synchronized Operation: This operation is used to synchronize two or more fixtures to the built in programs. This operation will synchronize the programs via sound. Use this operation mode if; 1)
Summary of the content on the page No. 5
Your first fixture will not have anything connected to the male XLR input connector and the last fixture will not have any thing connected the female XLR output connector. 5. During DMX operation the Mighty Scan will use 6 DMX channels to operate properly; CH1: Pan, CH2: Tilt, CH3: Pan & Tilt Speed, CH4: Color, CH5: Gobo, CH6: Shutter 6. For all other DMX operation, please refer to the instruction that were included with your controller. 7. We recommend using a 10k resitor terminator for cab
Summary of the content on the page No. 6
DMX-512 Addressing ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Mighty Scan™ 1 Mighty Scan™ 2 Mighty Scan™ 3 ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Mighty Scan™ 4 Mighty Scan™ 5 Mighty Scan™ 6 ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Mighty Scan™ 7 Mighty Scan™ 8 Mighty Scan™ 9 ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Mighty Scan™ 10 Mighty Scan™ 11 Mighty Scan™ 12 ON ON ON 1
Summary of the content on the page No. 7
DMX-512 Values Continued CHANNEL DESCRIPTION VALUES 1) PAN Mirror Pan Position (BASE) 0-255 2) TILT Mirror Tilt Position (HEAD) 0-255 3) SPEED Pan/Tilt Speed (SLOW> FAST) 0-255 4) COLOR Color Correction Filter 5600K 0-255 Blue 107 8-11 Blue 110 16-19 Blue 101 24-27 Cyan 401 32-35 Green 201 40-43 Green 204 48-51 Yellow 601 56-59 Orange 306 64-67 Red 304 72-75 Pink 303 80-83 Magenta 501 88-91 Magenta 507 96-99 Cyan 104 104-107 Orange 302 112-115 Turquoise 208 120-123 Pink 310 128-131 Yellow 603 1
Summary of the content on the page No. 8
DMX-512 Values Continued CHANNEL DESCRIPTION VALUES 6) SHUTTER / DIMMER Blackout 0-7 Shutter Open (Lamp On) 8-15 Shutter Closed 16-23 Stobe (Fast-Slow) 24-127 Strobe (Slow-Fast) 128-255 Control Panel 4: MIC SENSITIVITY ADJUSTMENT 5 6 4 5: MICROPHONE 6: DMX / MASTER SLAVE SETTINGS 7: DMX OUTPUT 8: DMX INPUT 9: FUSE HOLDER Dual 6.3A 10: POWER CONNECTION 7 9 10 8 XLR CONNECTIONS When connecting the units together via XLR cables, MALE XLR INPUT please follow the chart to left to insure proper con
Summary of the content on the page No. 9
® DMX-512 Addressing for the American DJ DMX Operaotr™ ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Mighty Scan™ 1 Mighty Scan™ 2 Mighty Scan™ 3 ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Mighty Scan™ 4 Mighty Scan™ 5 Mighty Scan™ 6 ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Mighty Scan™ 7 Mighty Scan™ 8 Mighty Scan™ 9 ON ON ON 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Mighty Scan™ 10 Might
