Summary of the content on the page No. 1
Summary of the content on the page No. 2
Table of Contents Overview of your Digital Photo Display………………………………………………………… 1 Feature………………………………………………………………………………………………2 Accessory………………………………………………………………………………………… 3 Key Function……………………………………………………………………………………… 3 Operation………………………………………………………………………………………… 4 Set the Clock……………………………………………………………………………………… 8 Set the Alarm……………………………………………………………………………………… 8 Background light………………………………………………………………………………… 8 Select the Temperature Format………………………………………………………………… 8 Specificati
Summary of the content on the page No. 3
LCD Travel Alarm Clock And Digital Photo Display Please read carefully before using this equipment. Thank you for purchasing this portable digital photo display. It can be used to store 60 photos. It is quick and easy to download pictures into your photo display. You may view your favorite pictures stored in this photo display anytime, anywhere. Overview of your Digital Photo Display - 1 -
Summary of the content on the page No. 4
LCD Display - 2 -
Summary of the content on the page No. 5
Feature 1. Photo display: JPG,BMP 2. Manual or Auto play mode 3. Time & Date Display 4. Clock & Hourly Call 5. Temperature Display 6. Background light Accessory 1. Photo Viewer *1 2. 5Pin Mini USB Cable *1 3. Driver CD *1 4. User Manual *1 5. AAA Battery *2 6. 3V (CR2032) battery *1 7. Protective Pouch *1 Key Function Previous Next Increase - 3 -
Summary of the content on the page No. 6
Decrease/Background light Power ON/OFF Time Setup Temp Setup Operation: 1. Install 2 AAA batteries into the unit. The unit will then start automatically and switch to slide-show mode. Then you can press or to select your favorite picture. Press , to go to the main menu, shown below: 1) To turn off, press or to POWER OFF and press to confirm.Press and hold for 3 seconds to turn on the until. Remark: To prevent the waste of battery power, the unit is off automati
Summary of the content on the page No. 7
· Press or to Auto Slide and press to set up the slideshow interval (the default interval time is 10 seconds, but you can select from 0~120 seconds): ·Press or to Manual Slide and press to confirm. The device will switch into manual slide mode. Then you can press or to view the pictures. 4) To set the clock, press or to Clock Set and press to confirm. Press or to set up the date and time. Press to confirm at each step. - 5 -
Summary of the content on the page No. 8
5) Press or to select Clock Disp, then press to confirm. The device will enter into clock setup shown below: ·Press or to select Disp Clock Normal, then press to confirm: 6) Press or to Auto ON/OFF, then press , it enters into the Auto ON/OFF setup as shown below: - 6 -
Summary of the content on the page No. 9
·Press or to select Auto ON, and the device will enter into the time setup shown below: ·Press or to select Auto OFF, then press . The device will deactivate the auto off function. 7) Press or to select Exit, then press to confirm. The device will exit the setup mode. (Note: if you stop pressing buttons for more than 60 seconds while in the setup mode, the photo viewer will switch into photo viewing mode automatically.) 2. When in photo display mode, press to enter into delet
Summary of the content on the page No. 10
3. Set the Clock Set the Time: 1. Press and hold for 3 seconds until the hour digits flash. 2. Press to set the hour. 3. Press to confirm. The minute digits flash. 4. Press to set the minute. 5. Press to confirm. The year digits flash. 6. Press to set the year. 7. press to fonfirm,The month digits flash. 8. Press to set the month. 9. Press to confirm. The date digits flash. 10. Press to set the date. 11. Press to confirm. Note: You can Press to view the date and month at
Summary of the content on the page No. 11
6 ．Select the Temperature Format 1. Press to display the temperature in °C or °F. 2. Press to confirm. Specifications Picture Formats BMP,JPG,PNG,GIF,TIF Picture resolution 128*128 dots LCD 1.5”TFT Memory Device Built-in 8Mbit flash Memory Capacity 60 photo Slide Mode Yes Automatic Energy Saving 120s Transmission Interface USB Interface Ver.1.1 Power Supply 2*AAA(3V)Batteries USB 5V(optional) Working Temperature 0 ℃-40 ℃ Operation System Win 98 SE/ME/2000/XP/Vista Clock
Summary of the content on the page No. 12
Test Period (Temperature) 10 seconds Back Light 5 seconds Power Supply 3V(CR2032) Replace Battery for Thermometer Your clock and thermometer comes with one CR2032 battery. If it does not work, please take the following steps to replace the battery. 1. Open the battery cover with a coin. 2. Remove old battery and install the new battery correctly into the compartment. 3. Replace the battery cover. 4. Software installation Please copy the software to your PC. (No
Summary of the content on the page No. 13
5. Picture Download After you copy the software to your PC ， connect the photo viewer to your PC, and the following dialogue appears: Press or to select USB Charge and press to confirm, or don’t press any buttons for 60 seconds. The device will enter into USB charge mode. During this time, you cannot download photos into the photo viewer, but you can operate the unit. Press or to select USB update and press to confirm. The computer will search the hardware automatically, then r
Summary of the content on the page No. 14
Select photos from your PC and click to add the selected photo into the right panel: - 12 -
Summary of the content on the page No. 15
- 13 -
Summary of the content on the page No. 16
You can edit the selected photo by clicking or to rotate, and or to crop the photo. Click to delete the selected photos from the right panel. Then press to download the selected photos into your photo viewer: - 14 -
Summary of the content on the page No. 17
- 15 -
Summary of the content on the page No. 18
When the download is finished the following message will appear: “Photo Viewer data synchronize complete”. Click OK to finish. (Please connect the PC when you download pictures. If you have open windows, close them before connecting your PC.) - 16 -
