Summary of the content on the page No. 1
VFD1028w
Digital Photo Frame
User Guide
Model No. VS14962
Summary of the content on the page No. 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Summary of the content on the page No. 3
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance Actual Concentration Concentration Lead (Pb) 0.1% < 0
Summary of the content on the page No. 4
Copyright Information © Copyright ViewSonic Corporation, 2013. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement
Summary of the content on the page No. 5
Important Safety Precautions Always follow these basic safety precautions when using your Digital Picture Frame. This will reduce the risk of fire, electric shock, and injury. Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Warning: To prevent the risk of electric shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified personnel. The Digital Picture Frame is for indoor use only. • • Unplug
Summary of the content on the page No. 6
Table of Contents 1. Hardware --------------------------------------------------------------------------- 1 1.1. Specifications ----------------------------------------------------------------- 1 1.2. Identification of Controls --------------------------------------------------- 1 1.3. Accessories ------------------------------------------------------------------- 2 1.4. Features ------------------------------------------------------------------------ 2 1.5. Features Checklist -----------------
Summary of the content on the page No. 7
1. Hardware 1.1. Specifications Panel size/ Aspect ratio 10.1 inch/ Wide Effective viewing area 8.2” W x 4.1” H ( 208.3 mm x 104.1 mm) LCD screen Resolution 1024 x 600 pixels Image formats supported JPG, JPEG (baseline coding), BMP Fhoto File Max. image resolution 30 million pixels Calendar Clock, Calendar Internal 128 MB Memory Card MMC, SD, SDHC ( max. 32GB) Memory Medium USB USB flash drive File System FAT, FAT32 Power Input 5VDC, 1A Power Consumption ≤ 5W Electric Specification Input AC 10
Summary of the content on the page No. 8
1.3. Accessories The following accessories are included with the digital photo frame. Remote Control AC/DC Adapter USB Cable Stand 1.4. Features Remote control and hard keypad control. • Playback of photo stored on data storage devices through • High-Speed USB 2.0 port, card-reader port or the built-in memory. Data storage devices: USB disk, SD, MS, MMC card. • Multi-language OSD supports: English, French, Spanish. • File format: JPG, BMP. • Photo Play S
Summary of the content on the page No. 9
1.5. Features Checklist VFD1028w Remote control and keypad control √ SD/MS/MMC √ USB √ Photo √ 10.1” TFT-LCD display √ Built-in memory √ Calendar √ 1.6. Remote control 1: Power on/off 2: Play/Pause/Enter 3/4: Left/Backward 5/6: Up/Rotate 7: Time 8: Menu 9/10: Zoom/Down 11/12: Forward/Right 13: Setup menu 3
Summary of the content on the page No. 10
2. Main function To attach the stand, screw in the stand clockwise until it is secure. Insert an SD/SDHC/MMC or USB memory source device into an appropriate memory slot. Connect the supplied power adapter to the photo frame and to an electrical outlet. The photo frame will power on automatically. Press “ ” to power on and off manually. 4
Summary of the content on the page No. 11
On the Main Menu, there are 【Photo】【 Calendar】【Setting 】. This photo frame searches the memory source device after power on and playback photos in slideshow mode if there are photos found. If there is no photo found, the Main Menu will be shown. 2.1. Photo Insert a memory card or USB flash drive with the photo on it into the photo frame if you had not done so. Select【Photo 】 from the main menu, press the ENTER button, this photo frame will start slideshow automatically. Press MENU to d
Summary of the content on the page No. 12
2.1.1. Browse Buttons Functional descriptions Exit to thumbnail view Previous photo Next photo -- -- Toggle Browse and Slideshow modes 2.1.2. Slideshow Buttons Functional descriptions Exit to thumbnail view Previous photo Next photo -- -- Toggle Browse and Slideshow modes 6
Summary of the content on the page No. 13
2.2. Calendar Select 【Calendar 】from the main menu, press the ENTER button to view the calendar. Monthly calendar mode is the default. 2.2.1. Display Mode The date and time displayed on the calendar are the current date and time set in the system. 2.2.1.1 Monthly calendar In this mode, photos are shown in slideshow on the top right. Buttons Functional descriptions Exit to the main menu Previous photo Next photo Previous month Next month Toggle Monthly calendar, Calendar (day), an
Summary of the content on the page No. 14
2.2.1.2 Calendar In this mode, photos are shown in slideshow on the right. Buttons Functional descriptions Exit to the main menu Previous photo Next photo -- -- Toggle Monthly calendar, Calendar (day), and Clock viewing modes 2.2.1.3 Clock In this mode, an analog clock is shown in the center. 8
Summary of the content on the page No. 15
Buttons Functional descriptions Exit to the main menu -- -- Toggle Monthly calendar, Calendar (day), and Clock viewing modes 2.3. Settings Select 【Setting 】from the main menu, press the “ENTER” button or press the 【SETUP】button on the remote control to enter the Settings Menu. The Photo, Calendar, and System settings are shown below. Press the Up 【▲ 】or Down 【▼ 】button to highlight a setting category, then 【ENTER】 button to enter the setup submenu. Buttons Functional descripti
Summary of the content on the page No. 16
2.3.1. Photo Setting Press the Up 【▲ 】or Down 【▼ 】button to highlight Photo Setting, then 【ENTER 】 button to enter the setup submenu. Press the Left 【◄ 】or Right 【►】button to change the entry field. Press the Up【▲】or Down 【▼】button to move between entry fields. Photo Setting Options Functional descriptions Display Mode Photo startup modes: Slideshow, Thumbnail, or Browse Mode Display Ratio Set the display scaling: Fit to Screen, Crop to Fill, or Full Screen Slideshow Duration Set the durat
Summary of the content on the page No. 17
2.3.3. System Setting Press the Up 【▲ 】or Down 【▼ 】button to highlight System Setting, then 【ENTER 】button to enter the setup submenu. Press the Left 【◄ 】or Right 【►】button to change the entry field. Press the Up【▲】or Down 【▼】button to move between entry fields. Photo Setting Options Functional descriptions Language Set the display language Brightness Adjust screen brightness: 1 to 16 Contrast Adjust the screen contrast: 1 to 16 Saturation Adjust the screen saturation: contrast: 1 to 16 Auto P
Summary of the content on the page No. 18
3. Troubleshooting Symptoms Solutions Cannot power on, even when • Check whether the AC power adapter the device is connected to an rating is correct, and it is securely plugged electrical outlet. to the device and to an electrical outlet. Failed to read memory card • Check whether memory card is inserted properly. The notch should match the label on the device. Do not force the memory card in Cannot playback pictures • The digital photo frame only supports pictures in JPEG, JPG format
Summary of the content on the page No. 19
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ T=Telephone Web Site E-mail Region F=Fax Australia/New AUS=1800 880 818 www.viewsonic.com.au service@au.viewsonic.com Zealand NZ=0800 008 822 T (Toll-Free)= 1-866-463-4775 Canada www.viewsonic.com T (Toll)= 1-424-233-2533 service.ca@viewsonic.com F= 1-909-468-3757 Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk
Summary of the content on the page No. 20
Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty
