Summary of the content on the page No. 1
Register your product and get support at
PhotoFrame
8FF3WMI
EN User manual 3
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents View system status of the PhotoFrame 42 1 Important 4 Reset all settings to factory default 43 Safety 4 Update the PhotoFrame 43 Notice 4 6 Product information 45 2 Your Wireless Digital PhotoFrame 7 Introduction 7 7 Frequently asked questions 46 What’s in the box 7 Overview of the PhotoFrame 8 8 Appendix 47 Download and set up Windows Media Player 11 47 3 Get started 10 Install the stand 10 Connect power 10 9 Glossary 50 Turn on the PhotoFrame
Summary of the content on the page No. 4
procedures not recommended or authorised in 1 Important this manual shall void the warranty. CE Declaration of Conformity Safety Hereby Philips Consumer Lifestyle, P&A, declares that this Wi-Fi Digital PhotoFrame Safety precautions and maintenance 8FF3WMI-/00-/05 is in compliance with the • Never touch, push, rub or strike the screen essential requirements and other relevant with hard objects as this may damage the provisions of Directive 1999/5/EC. screen permanently. European regulation
Summary of the content on the page No. 5
End-of-Life Disposal or the following team of Environmental • Your new product contains materials that specialist can help. can be recycled and reused. Specialized companies can recycle your product to Compliance with Electro-Magnetic increase the amount of reusable materials Field (EMF) and to minimize the amount to be disposed of. Koninklijke Philips Electronics N.V. manufactures • Please fi nd out about the local regulations and sells many products targeted at consumers, on how to dis
Summary of the content on the page No. 6
ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. Banned Substance Declaration This product comply with RoHs and Philips BSD (AR17-G04-5010-010) requirements. This PhotoFrame includes this label: 6 EN
Summary of the content on the page No. 7
2 Your Wireless Digital PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/welcome. • Stand Introduction With Philips Wireless Digital PhotoFrame, you can display digital photos in high quality. You can place it on a fl at surface or hang it on the wall to display photos from USB devices and memory cards. Even photos stored on a computer or available on the Internet can be a
Summary of the content on the page No. 8
PhotoFr PhotoFrame ame 88FF3WMI FF3WMI Quick star Quick start guide t guide 11 Connect Connect 2 2 Setup Setup Enjo Enjoy y 3 3 Eng Eng • Quick Start Guide Overview of the PhotoFrame a a o o b b d d c c n n e e f f g g h h i i j j k k l l m m • Adjust brightness level a d OK • Turn on/off the PhotoFrame • Confi rm a selection b e • Return to the upper-level menu • Access photo options c / / / navigation key • Access quick settings menu • Select the previous/next/right/left item • View Memory/Netw
Summary of the content on the page No. 9
f RESET • Restore the PhotoFrame g • Slot for a USB fl ash drive h • Socket for USB cable i CF • Slot for a CF card j SD/MMC/xD/MS/MS Pro Duo • Slot for an SD/MMC/xD/MS/MS Pro Duo card k WPS (Wi-Fi Protected Setup) • Quick button for wireless connection setup l DC • Socket for the AC-DC power adaptor m Kensington lock n Stand hole o Wall mounting hole Tip • For mounting the PhotoFrame on the wall, use a 7.0*25*3.0 mm screw. For secure wall mounting, screw over seven turns. EN 9 English
Summary of the content on the page No. 10
3 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your PhotoFrame. The model number and serial number are on the back of your PhotoFrame. Write the numbers here: Model No. __________________________ Connect power Serial No. ___________________________ Note Install the stand • When you position the PhotoFrame, ensure that the po
Summary of the content on the page No. 11
Set up wireless connection You can wirelessly connect the PhotoFrame to a PC/Mac or the Internet to share photos with one of the following methods: • Using a WPS-enabled router • Using a Windows Vista PC • Manually » If there is no language selection, the PhotoFrame displays photos in slideshow mode about 30 seconds later. • For any other time use Internet Internet » After the PhotoFrame is turned on, the main menu is displayed. Set up wireless connection with WPS- enabled router What you
Summary of the content on the page No. 12
WPS WPS » If wireless network setup is successful, a confi rmation message is displayed. 3 Press OK to confi rm. • Check whether a valid IP address is assigned to the PhotoFrame 2 Write down the PIN for the PhotoFrame: (see ‘View system status of the _ _ _ _ _ _ _ _. PhotoFrame’ on page 42). 4 Share PC photos for wireless display (see (2) On a Windows Vista PC: ‘Share PC/Mac photos for wireless display’ 1 Ensure that the PC is connected to the on page 15). network. • Display Internet ph
Summary of the content on the page No. 13
• On the PhotoFrame, check whether 4 Select the PhotoFrame from the list, then a valid IP address is assigned to the click [Next]. PhotoFrame (see ‘View system status of the PhotoFrame’ on page 42). 6 Share PC photos for wireless display (see ‘Share PC/Mac photos for wireless display’ on page 15). • Display Internet photos on the PhotoFrame (see ‘Display Internet photos’ on page 21). Set up wireless connection manually What you need: • A wireless router • Select the network to add th
Summary of the content on the page No. 14
• If the SSID for the network is not displayed, select [Other...], then press OK to confi rm. To enter the SSID for the network, select an alphabet/number, then press OK to confi rm. • To switch between uppercase and lowercase, select [a/A] on the displayed keypad, then press OK to confi rm. 2 Select [Installation] > [Network] > [Wireless] > [Use manual confi guration], then press OK to confi rm. 4 If the security key is required, enter the security key to connect to the network. 3 Selec
Summary of the content on the page No. 15
6 Share PC photos for wireless display (see 2 Click [Librar y]. ‘Share PC/Mac photos for wireless display’ on page 15). • Display Internet photos on the PhotoFrame (see ‘Display Internet photos’ on page 21). Share PC/Mac photos for wireless display To display photos in a shared folder on a PC/ Mac, set up a wireless sharing center. 3 Select [Ad d to Library ...] from the drop- down menu. 4 In the [Select folders to the monitor] Note window, select [My personal folders], then • Only JPEG
Summary of the content on the page No. 16
6 Select a photo folder to be added to 8 Share the photo folder to the PhotoFrame Windows Media Player 11, then click [OK] with Windows Media Player 11 (see to confi rm. ‘Enable access to shared photos’ on page 16). Enable access to shared photos Before you start, ensure that Windows Media Player 11 is set up on the PC. 1 On the PC, open Windows Media Player 11. 2 Click [Librar y]. 7 Click [OK] again. 3 Select [Media Sharing ...] from the drop- down menu. 4 Select [Share my media], then
Summary of the content on the page No. 17
Set up TCP/IP connection (For advanced users only) You can set up TCP/IP connection for a customized Internet protocol setting. 1 In the main menu, select [Settings], then press OK to confi rm. 6 Select [Pictur es] under [Media tpyes:], select [All ratings] under [Parental ratings], then click [OK] to confi rm. 2 Select [Installation] > [Network] > [TCP/ IP] > [Address Mode], then press OK to confi rm. 7 Select the PhotoFrame and click [Allow]. 3 Select [Automatic (DHCP)] , then press OK
Summary of the content on the page No. 18
» An IP address is automatically selected for the PhotoFrame. 4 Share PC photos for wireless display (see ‘Share PC/Mac photos for wireless display’ on page 15). To use a fi xed IP address for the PhotoFrame: 1 Select [Installation] > [Network] > [TCP/ IP] > [Address Mode] > [Fixed IP], then press OK to confi rm. 2 Select [IP Ad dress] / [Subnet Mask] / [Gateway] / [DNS 1] / [DNS 2], then press OK to confi rm. 3 Press / / / to adjust the numbers, then press OK to confi rm. 4 Share PC photo
Summary of the content on the page No. 19
Display photos stored on a 4 Use your storage device Wireless Digital You can display photos stored on one of the following storage devices: PhotoFrame • Compact Flash type I • Secure Digital (SD) • Secure Digital (SDHC) Display photos stored on the • Multimedia Card PhotoFrame • xD card • Memory Stick • Memory Stick Pro Note • Memory Stick Duo • Only JPEG photos can be displayed on the PhotoFrame. • Memory Stick Pro Duo • USB fl ash drive 1 In the main menu, select [PhotoFrame], Note then
Summary of the content on the page No. 20
• An available UPnP server is installed and set up on the PC/Mac. • Photo folders to be shared are added to the UPnP server. Note • Only JPEG photos can be displayed on the PhotoFrame. 1 In the main menu, select [Shared], then press OK to confi rm. 2 Select a storage device, then press OK to confi rm. 2 Select [Netw ork Servers], then press OK to confi rm. 3 Select an album, then press OK to confi rm. » Photos in the album are displayed in slideshow mode. During slideshow: • To pause slides
