Summary of the content on the page No. 1
KODAK EASYSHARE
W820/W1020 Wireless
Digital Frames
Extended user guide
www.kodak.com
For help with your digital frame, www.kodak.com/go/digitalframesupport
Summary of the content on the page No. 2
Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2008 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. Eastman Kodak Company is an authorized licensee of the CompactFlash trademark. P/N 4H5172_en
Summary of the content on the page No. 3
Product features Front View 1 LCD screen 1 2 Touch border (tap/slide) 3 Touch border (tap only) 4 Lights 5 Raised guide 3 NOTE: When screen icons appear, lights turn on at touch-sensitive 4 points near the raised guide. 2 5 To use the touch border, see page 3. Back/Right View 1 Audio In 2 Audio Out 1 3 DC-In (12V) 4 Speakers (2) 2 4 3 www.kodak.com/go/support i
Summary of the content on the page No. 4
Back/Side View 4 1 5 2 6 3 7 8 1Power button 5 Volume button 2 Wall mounting holes 6 Memory card slot - CF, MD 3 Rotating/extending stand (see page 1) 7 USB connector (to camera/USB device) 4 Memory card slot - SD/SDHC, MMC, 8 USB connector (to computer) MS, xD ii www.kodak.com/go/support
Summary of the content on the page No. 5
Table of contents 1 1 Getting started ......................................................................................1 Setting up your frame....................................................................................1 Turning on/off your frame..............................................................................2 Using your frame’s Quick Touch Borders........................................................3 Setting your language ...........................................
Summary of the content on the page No. 6
Table of contents Playing music..............................................................................................37 Playing a video............................................................................................38 Printing pictures..........................................................................................39 Copying on your frame................................................................................41 Deleting pictures ..............................
Summary of the content on the page No. 7
Table of contents 9 Appendix .............................................................................................73 Digital frame specifications..........................................................................73 Important safety instructions .......................................................................75 Additional care and maintenance ................................................................76 Limited warranty .................................................
Summary of the content on the page No. 8
1 Getting started Welcome to your KODAK EASYSHARE W820/W1020 Wireless Digital Frame. Viewing your pictures couldn’t be simpler! Setting up your frame Setting up the stand Your frame displays pictures in landscape orientation. To change to portrait orientation, see page 65. Stand (pull to adjust the frame angle for best viewing) 2 When displayed with the stand extended, the frame rests at a 68-90 ° angle. 1 1 www.kodak.com/go/support
Summary of the content on the page No. 9
Getting started Attaching the power cable CAUTION: Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. 1 2 Turning on/off your frame Power button - press and hold (for about 2 seconds), then release. With the power cable still plugged in, your frame retains information (like the time) if you turn it off. www.kodak.com/go/support 2
Summary of the content on the page No. 10
Getting started Using your frame’s Quick Touch Borders IMPORTANT: The display screen is not touch-sensitive. Do not touch it. Lights appear on the borders (upper right and bottom) to show you where to touch. CAUTION: Only use your finger to touch the borders. Using sharp or metal objects may damage the border or screen. Tap lights next to Touch tips icons Tap and slide on the Quick (No sliding here) Touch Borders* only. Home Tap a border to display the icons. Play slide show Choose OK or Ta
Summary of the content on the page No. 11
Getting started Setting your language The language screen appears the first time you turn on your frame. Slide (or tap below slider arrows) on the lights at the bottom border to highlight your language, then tap Save. Save NOTE: Slide left/right on the lights to move up or down the list. To change the language at a later time: Tap (Home) → (Settings) → Language. Slider arrows The language screen appears. Slide to highlight your language, then tap Save. To use the Quick Touch Borders, s
Summary of the content on the page No. 12
2 Setting up for wireless operation If you have problems with your wireless setup or connection, see Troubleshooting starting on page 67. Or open EASYSHARE Digital Display Software on your computer (see page 9) and click Tools → Wireless Troubleshooter. Follow the automated troubleshooting wizard. Connecting to your wireless network To allow your frame to access the contents of your computer wirelessly, connect your frame to your wireless home network. NOTE: If you are not sure you have a w
Summary of the content on the page No. 13
Setting up for wireless operation Available wireless networks are listed. NOTE: If the scan finds multiple networks, your home network (with the highest % signal strength) is usually listed first and highlighted. Tap OK. Or, to select another network, slide or tap below the arrows to highlight a network, then tap OK. Slider Slider arrows You can slide to highlight Exit without connecting, then tap OK (or tap Back) to dismiss the screen and go to the Home screen (see page 30). If you want t
Summary of the content on the page No. 14
Setting up for wireless operation If your wireless network is not found: a. Slide to highlight My network not shown, then select OK. b. Check that your router is on and your frame is close to the router, then select Scan again. If your wireless network is still not found, your network does not broadcast SSIDs. You then need to enter your network SSID (sometimes called the network name) manually: a. Select Enter SSID, then tap OK. The on-screen keyboard appears. b. Using the on-screen keyboard
Summary of the content on the page No. 15
Setting up for wireless operation Backspace - erases text Done Touch tips Right border - tap only On the bottom border, keep sliding (or tapping slider arrows) left/right to go to the previous or next row. Text box Select Slider Slider arrows If you do not have security enabled, go to step 3. (We recommend that you enable your network security to prevent others from accessing your wireless home network.) NOTE: The screen identifies your security as either WEP or WPA. A WEP security key can
Summary of the content on the page No. 16
Setting up for wireless operation Installing the software: WINDOWS OS only IMPORTANT: For MAC OS users, do not install the software on your computer. See page 15 to open your frame’s Device Settings page in your browser to start setting access to Web content and customizing your frame. The CD that was packaged with your frame contains two applications that work well independently, but also work together for the best experience with your frame: KODAK EASYSHARE Digital Display Software —manag
Summary of the content on the page No. 17
Setting up for wireless operation Verifying computer/device connections Scanning to verify your wireless network connection gives your frame access to content on your devices wirelessly. After installing the software (see page 9), return to your frame then: 1 Tap OK. The network connection setup screen appears. Scan later Scan now If you forgot to install the software, tap Back then install the software (see page 9). When you are done installing the software on your computer, tap OK on your
Summary of the content on the page No. 18
Setting up for wireless operation Help Done Exit Scan again 3 If your computer is listed, your wireless connection is successful. Tap Done to close the window. If your computer is not listed, tap Scan again or tap Help for options. You have completed the frame setup. Your frame can now access your host computer, wirelessly. Your computer appears as a picture source icon on your frame’s Home screen (see page 30). 4 Tap (Home) to start viewing your pictures. NOTE: If you have more than one fr
Summary of the content on the page No. 19
3 Setting up Web content Setting up access to the Gallery and Web media IMPORTANT: For Mac OS users, do not load the EASYSHARE Digital Display Software on your computer. See page 15 to open your frame’s Device Settings page in your browser to start setting access to Web content and customizing your frame from your computer. On your computer, use KODAK EASYSHARE Digital Display Software (see page 12) to set up access to the KODAK Gallery and RSS (Really Simple Syndication) feeds such as pub
Summary of the content on the page No. 20
Setting up Web content 5 6 6 From the drop-down menu, select your frame. 7 Click the following Web Media pages for setup instructions to easily access content right on your frame: KODAK Gallery—connect to your existing Gallery account or set up a new one to receive pictures from other Gallery friends and family. See page 16. FLICKR—sign in to your existing FLICKR account or set up a new one (see page 17) so you can receive and view FLICKR photos on your frame. FRAMECHANNEL—add to your l
