Summary of the content on the page No. 1
WIRELESS PROFESSIONAL COLOR WEATHER
STATION & PHOTO ALBUM WITH 7” TFT SCREEN
MODEL 308-807
Operations Manual
Summary of the content on the page No. 2
INTRODUCTION: ongratulations on purchasing this state-of-the-art weather station. Featuring time, date, C calendar, weather forecast, wind gust and wind speed, indoor/outdoor temperature and outdoor humidity, air pressure and rainfall digital photos of your choice. This weather station will provide as little or as much weather information as you choose. TFT (Thin Film Transistor) LCD allows a display of clear crisp photos. Designed and engineered with state-of-art technology and compo
Summary of the content on the page No. 3
TABLE OF CONTENTS: MODEL 308-807 ........................................................................................................................... 1 INTRODUCTION: ......................................................................................................................... 2 INVENTORY OF CONTENTS: ..................................................................................................... 2 TABLE OF CONTENTS: .....................................................
Summary of the content on the page No. 4
Weather And Photo Mode: ...................................................................................................... 21 Photo Mode: ............................................................................................................................ 22 Calendar Mode: ....................................................................................................................... 22 WEATHER FORECAST ICONS: .................................................................
Summary of the content on the page No. 5
FEATURES: WIRELESS DISPLAY Time display in 12/24 hour time format Manual set time and date. Time alarm. Calendar display (date, month, year) Moon phase with eight displays. Weather forecast with 5 weather icons (Sunny, partly cloudy. cloudy, rainy and stormy). Temperature display in °F/°C: from -4 °F to +140 °F (-20 C to +60 C) Humidity display in RH%: from 20% to 99% Relative air pressure reading in inHg/hPa: 6-hour pressure history
Summary of the content on the page No. 6
INITIAL QUICK SETUP: WIRELESS DISPLAY: Plug in the 5.0V adapter into the adapter socket on the right side of the weather station to power up the photo frame weather station. IR REMOTE CONTROL: Pull out the battery insulation sheet from the bottom of the IR remote control to activate. PHOTOS: Save photos (JPEG) to a USB flash drive, SD (secure digital) or MMC (multimedia card) memory cards. Insert memory device into the wireless display. WIND/THERMOHYGRO SENSOR: Selec
Summary of the content on the page No. 7
DETAILED SETUP AND MOUNTING: WIRELESS DISPLAY: A/C ADAPTER USB PORT SD/MMC CARD SLOT BASE STAND POWER LIGHT FUNCTION BUTTONS Main Power Source: Plug in the 5.0V adapter into the adapter socket of the weather station. Note: Buttons on the wireless display respond the same as the buttons on the IR remote control. POWER: Turn on or off the unit UP/DOWN ARROWS: Move up or down in the setup mode LEFT/RIGHT ARROWS: Se
Summary of the content on the page No. 8
IR REMOTE CONTROL: Battery: A (CR2025) battery is included in the IR remote control. Initial setup: pull out the battery insulation sheet from the bottom of the IR remote control. Replace the battery: Follow the instructions on the back of the IR remote control l to pull out the battery door. Follow the battery polarity and replace a new CR2025 battery.
Summary of the content on the page No. 9
WIND/THERMO-HYGRO SENSOR Positioning the wind/thermohygro sensor: Place the Wind/Thermohygro sensor as high as you can install it. Generally, 6 ft. above the peak of the roof (or more) is required for accurate readings. Since this sensor requires batteries to provide power, you may need it more accessible then a traditional roof mount would allow. Cups should be below the directional vane. NOTE: You will need to change batteries occasionally. The Wind/Thermohygro sensor should be w
Summary of the content on the page No. 10
Calibrate wind direction & install batteries: Calibrating the wind direction after mounting the wind/thermohygro sensor allows flexibility in mounting locations. Be sure batteries have been removed from the wind/thermohygro sensor before the calibration. NOTE: The same calibration is required for the initial set up and for every battery replacement. After mounting the wind/thermohygro sensor, loosen the screws on the battery door with a small screwdriver and open the battery door.
Summary of the content on the page No. 11
RAIN GAUGE Battery Installation for the rain gauge: Press the tabs back as indicated below to unlock the rain gauge cover. BATTERY COVER Lift the rain gauge cover off its base. Then carefully remove the packing tape from the rocker assembly. Open battery cover and insert 2-AA batteries according to the polarity indicated. Close the battery cover Replace & lock the rain gauge cover on the base. Go to the wireless display and enter SET UP mode. Scroll down to WIRELESS SE
Summary of the content on the page No. 12
Use a pencil to trace the inside of the mounting holes on the base of the rain gauge to mark the screw locations. Drill a hole in the center of each marked location and insert the supplied plastic screw plugs Hold the rain gauge against the mounting surface so the holes on the base align with the plugs, then thread the supplied washer head screws into each hole and use a screwdriver to tighten them to snug. Avoid over tightening the screws as this may cause low rain readings.
Summary of the content on the page No. 13
DISPLAY MODES: There are 5 display modes in the menu selection. Use the EXIT button on the wireless display or on the IR remote control to access the menu selection. Press LEFT ARROW button or RIGHT ARROW button to select a display mode, and then press ENTER to view the selected display mode. NOTE: The SETUP icon is on the second page of the screen. SETUP PHOTO WEATHER WEATHER & PHOTO CALENDAR SETUP MODE: There are three screens
Summary of the content on the page No. 14
Contrast: Select the contrast of the display from level 1 to 16 Saturation: Select the saturation of the display from level 1 to 16 Radio-Controlled Reception: (This function is not available for this unit. Please keep this setting to “Off”) Time Zone: (This function is not available for this unit. Please keep this setting to “Ohr”) Time/Date: Adjust: Year, Month, Date, Hour, Minute Calendar Display Format: Select between Day/Month or Month/Day display Time Format: S
Summary of the content on the page No. 15
DETAILED SETUP MENU: LANGUAGE: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the first screen to Language. Use the RIGHT ARROW button to select English, French or German. Press ENTER to confirm the setting. SLIDESHOW TIME: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the first screen to Slideshow Time. Use the RIGHT ARROW button to select how frequently the photos should ch
Summary of the content on the page No. 16
MINUTES: Use the RIGHT ARROW button to move to the Minutes. Use the UP/DOWN ARROW button to select the Minutes. Press the ENTER button to confirm the settings. OFF/ON: Use the RIGHT ARROW button to move to the Alarm OFF/ON. Use the RIGHT ARROW button to ENALBE or DISABLE. Press ENTER to confirm the setting. Scroll down to ON/OFF TIMER 1-Off. This will set the time for the screen to power on again. HOUR: Use the RIGHT ARROW button to move to the Hour. Use the UP/DOWN ARROW button to select
Summary of the content on the page No. 17
CALENDAR DISPLAY FORMAT: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the second screen to Calendar Display Format. Use the RIGHT ARROW button to change from Month/Day format to Day/Month format. Press the ENTER button to confirm the setting. TIME FORMAT: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the second screen to Time Format. Use the RIGHT ARROW button to select 12-hou
Summary of the content on the page No. 18
RAINFALL UNIT: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the third screen to Rainfall Unit of measurement. Use the RIGHT ARROW button to choose from mm or inches. Press ENTER to confirm. WIND UNIT: On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the third screen to Wind Unit of measurement. Use the RIGHT ARROW button to choose from: M/S- meters per second Knots- 1 nautica
Summary of the content on the page No. 19
REMOTE CHANNEL DISPLAY: This station has the option of adding two additional thermohygro sensors model W186-Q, 915MHz, for temperature/humidity readings in different locations. Extra sensors may not be available at this time. On the remote control, press the SETUP button to enter the set up menu. Use the arrows to scroll down the third screen to Remote Channel Display. Use the RIGHT ARROW button to choose from: Automatic – Show all the channel(s) being registered Indoor & Channel 1 o
Summary of the content on the page No. 20
VIEW DIFFERENT DISPLAY MODES: On the IR remote control, use these buttons to switch between different display modes: WEATHER WEATHER & PHOTOS PHOTOS CALENDAR NOTE: In Weather Mode and Weather & Photos Mode: The indoor temperature/humidity will constantly switch with the outdoor temperature/humidity readings. The daily, weekly and monthly rain will continually switch but the total rain will remain constant. This switching feature cannot be turned off. WEATHER MODE: 1) Weathe
