Summary of the content on the page No. 1
Digital Photo Frame
7” LCD with Atomic Clock
Model #: 7DPF300RCC
User’s Manual
PID # 161300-109239
Rev. 071011
Summary of the content on the page No. 2
All brand name and trademarks are the property of their respective owners USER’S RECORD: To provide quality customer service and technical support, it is suggested that you keep the following information as well as your store receipt and this user’s manual. Date of Purchase: ________________________________ Model Number: ________________________________ Serial Number: ________________________________ Product Rev Number (located below the UPC on the package): _________________
Summary of the content on the page No. 3
PACKAGE CONTENTS: Your new Digital Photo Frame will ship with the following items: - Digital Photo Frame 7” LCD with Atomic Clock - Remote Control - AC Power Adapter - USB Cable - User’s Manual - Warranty Information SYSTEM SPECIFICATIONS: Your new Digital Photo Frame complies with the following specifications: - Screen Dimensions: 7.0 inches - Resolution: 480 x 234 2 - Brightness: 250 cd/m - Contrast: 200:1 - Photo File Format: JPEG - Memory Card Formats: SD, MMC, MS, or CF -
Summary of the content on the page No. 4
HARDWARE DESCRIPTION: Display Screen Atomic Clock and Calendar display AC Power Photo Frame Adapter Stand USB Cable Remote Control CF Card Slot USB Port Power Jack SD/MMC/MS Card Slot Remote Control MENU Press to open the “Settings” menu or the control menu when a photo is being displayed manually. ESC Press to exit a setup screen, AUTOPLAY, or go back to the previous screen. AUTOPLAY Press to display photos one by one at a preset interval. NOTE: When this func
Summary of the content on the page No. 5
Built-in Photo Frame Control UP/DOWN ENTER ON/OFF SWITCH ESC/MENU LEFT/RIGHT ON/OFF SWITCH Switch to turn the Digital Photo Frame ON or OFF. ENTER Press to select an option or a photo. Press to save a changed setting in the setup screen. ESC/MENU Press and hold to open the setup screen or the control menu when a photo is being displayed manually. Press to function as the “ESC” button on the Remote Control. UP/DOWN Press to navigate up and down or to view the previous o
Summary of the content on the page No. 6
HARDWARE INSTALLATION: 1. Attach the enclosed Stand onto the back of your Digital Photo Frame with a screw driver (not included). 2. Connect the power jack of the enclosed AC Power Adapter to your Digital Photo Frame, and plug the other end into an electric outlet. 3. Place your Digital Photo Frame on a flat and steady surface. 4. Your Digital Photo Frame is now ready to be used. 6
Summary of the content on the page No. 7
USING THE ATOMIC CLOCK: 1. Remove the battery insulation film from the battery compartment of your photo frame, and the radio-controlled signal search will start. Note: During the signal search, please shut down the photo frame to reduce interference and restart the photo frame when the signal search is complete. It is best to unplug the AC adapter from the unit as well. 2. The wave symbol will keep flashing after the clock starts. The flashing icon indicates the radio-controlled circuit i
Summary of the content on the page No. 8
c. Press the “UP” button until the desired hour is displayed. d. Press the “SET” button then the “UP” button until the correct minute is displayed. e. Press the “SET” button to exit the alarm setting mode. f. Press the “UP” button to enable or disable the alarm. When the alarm is active a Bell is displayed. g. The alarm will sound for one (1) minute every day when the alarm time arrives. Pressing any key will shut the alarm off. 4. To use the Daylight Saving Feature, press and hold the ZO
Summary of the content on the page No. 9
USINGTHE DIGITAL PHOTO FRAME: 1. Make sure that you have properly connected the AC Power Adapter; refer to the Hardware Installation instructions above if necessary. 2. Carefully insert your memory card into the proper slot as shown below following the orientation guide on the memory card. 3. Turn on your Digital Photo Frame and the below screen will appear. 4. Use the enclosed Remote Control or the Built-in Control and select the icon on the left to enter
Summary of the content on the page No. 10
5. Select the photo you want to view by pressing the “Enter” button on the Remote Control or on the Built-in Control. Pressing the “Menu” button on the Remote Control will show the options below. Zoom in. Zoom out. Rotate photo clockwise 90 degrees. . Rotate photo counterclockwise 90 degrees. Opens the “Settings” Menu. 6. Select the “Settings” icon to open the “Settings” Menu. Language Select this to
Summary of the content on the page No. 11
CONNECTING TO A COMPUTER: 1. Make sure all memory cards have been removed from your Digital Photo Frame. 2. Turn on your computer. 3. Plug the USB mini-B connector end of the enclosed USB Cable to your Digital Photo Frame. 4. Plug the USB-A connector end of the USB Cable into an available USB port on your computer. 5. Your computer will detect and install the necessary drivers automatically. 6. Your Digital Photo Frame can now be used as a Card Reader. 11
Summary of the content on the page No. 12
WARRANTY INFORMATION: Gear Head, LLC warrants that this product shall be free from defects in materials and workmanship for one year. If the product is defective, Gear Head, LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this warranty, to repair or replace any parts deemed defective. This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable. THIS WARRANTY IS MADE IN LIEU OF ALL OTH
