Summary of the content on the page No. 1
Camera Operation Manual
Camera Operation Manual
To ensure correct use of your
camera, read this manual
carefully before use. Keep the
manual handy for future use.
RICOH CO., LTD.
3-2-3, Shin-yokohama
Kohoku-ku, Yokohama-shi
222-8530, Japan
L2172551
Summary of the content on the page No. 2
Introduction Ricoh Service Offices Thank you for purchasing a Ricoh RDC-i500. This manual explains the correct handling 3-2-3, Shin-yokohama procedures and precautions for your camera. To ensure the best performance, please Kohoku-ku, Yokohama-shi read the manual thoroughly before using the camera. Keep the manual handy for quick 222-8530, Japan future reference. http://www.ricoh.co.jp/r_dc Ricoh Co., Ltd. Ricoh Factory Service Center Test Shots 3235 Sunrise Blvd., Suite2 Rancho Cordova, Check
Summary of the content on the page No. 3
➜➜ How to Use the Operation Manuals Five operation manuals are supplied with this camera. Use each operation manual as shown below to suit the purpose. Open the package ➜ Read This Before Proceeding! These instructions explain the procedure for checking the contents of the package and loading the battery to enable you to use the camera straightaway. Basic operation Camera Operation Manual (this manual) This manual explains in detail the preparations to take before using the camera together with
Summary of the content on the page No. 4
CONTENTS How to Use the Operation Manuals...................................................... 1 Parts & Names ...................................................................................... 6 Safety Precautions ................................................................................ 8 Chapter 1 Getting Started Before Using the Camera ................................................................... 14 Attaching the Wrist Strap ..................................................
Summary of the content on the page No. 5
Chapter 3 Shooting Basic Shooting .................................................................................... 40 Operation Flow ..................................................................................... 40 Selecting a Recording Mode ................................................................ 41 Selecting the Storage Memory ............................................................ 42 Selecting a Folder ...................................................................
Summary of the content on the page No. 6
Chapter 4 Playback/Deleting Basic Playback.................................................................................... 82 Files Playable on the Camera .............................................................. 82 Playing a Still Picture, Text or Continuous Shooting File .................... 82 Playing a Voice Memo File .................................................................. 83 Playing a Motion Picture File ............................................................... 84
Summary of the content on the page No. 7
Appendix Troubleshooting ................................................................................ 128 Error Messages ................................................................................. 131 Using Your Camera in Other Countries ............................................ 133 Recording Capacities ........................................................................ 134 Accessories ....................................................................................... 135 H
Summary of the content on the page No. 8
Parts & Names Camera Body Front Shutter Release Button (P.38) (Picture Mode) Button (P.44) LCD Panel (P.26) Button (P.55) Zoom Lever (P.46) / Button (P.42) Button (P.63) LCD Monitor (P.26) Self Timer Lamp Lens AF Window Sub Shutter Release Flash button (P.38) Microphone Back Power Supply Terminal (DC Input) (P.18) Terminal Cover Speaker Tripod Screw Hole Strap Eyelet (P.14) AV Output Digital (USB) Terminal (P.86) Terminal Reset Switch (P.133) 6
Summary of the content on the page No. 9
Operating Parts Operation Panel Remote Control Reception LCD Monitor (P.26) Mode Dial (P.25) Viewfinder • Flash Lamp • Auto Focus Lamp Battery Cover (P.16) Diopter adjuster (P.36) Power Switch (P.24) CF Card Slot (P.20) EJECT Button Battery/Battery Charger AC Adapter (optional) • AC-3 (100 V – 240 V) Battery Charger (BJ-1) Power Cord Power Cord Connection Cable Rechargeable Battery (DB-20L) Remote Control Unit (optional) DR-4 (available in the near future*) DR-3 * As of April, 2001 7
Summary of the content on the page No. 10
Safety Precautions Warning Symbols Various symbols are used throughout this operation manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below. This symbol indicates matters that may lead to death or serious RWarning injury if ignored or incorrectly handled. This symbol indicates matters that may lead to injury or physical RCaution damage if ignored or incorrectly handled. Sample Warnings The o symbol ale
Summary of the content on the page No. 11
RWarning Turn off the power immediately if any metallic object, water, liquid or other foreign object gets into the equipment. Remove o the battery as soon as possible, being careful to avoid electric shocks or burns. If you are drawing power from a household electrical outlet, be sure to unplug the power cord from the outlet to avoid fire or electrical hazards. Discontinue use of the equipment immediately if it is malfunctioning. Contact the nearest service center at your earliest convenience
Summary of the content on the page No. 12
RWarning Observe the following precautions to prevent fire, electric shock or explosion caused by the battery charger. m • Do not use a power source voltage other than that indicated. Avoid putting several loads on one power outlet or using an extension cable. • Do not cut, damage, tie in a bundle or alter the power cord. Do not place heavy objects on the power cord, pull it or bend it excessively. • Do not plug or unplug the power cord with wet hands. When unplugging the power cord, be sure t
Summary of the content on the page No. 13
RWarning Do not use the equipment near flammable gases, gasoline, benzine, thinner or similar substances to avoid the risk of m explosion, fire or burns. Do not use the equipment in aircraft or other locations where usage is restricted or prohibited as this may lead to disasters or accidents. Wipe off any dust that accumulates on the electrical plug as this may lead to fire. o Use only the specified AC adapter for this equipment (optional AC-3) in household electrical outlets. Other adap
Summary of the content on the page No. 14
Observe the following precautions to ensure safe use of this equipment. RCaution Contact with fluid leaking from the battery can lead to burns. If part of your body comes in contact with a damaged o battery, wash the area with water immediately. (Do not use soap.) If the battery starts to leak, remove it from the equipment and wipe the battery chamber thoroughly before replacing it with a new battery. Plug the power cord securely into the electrical outlet. Loose cords pose a fire hazard. o
Summary of the content on the page No. 15
Chapter 1 Getting Started Before Using the Camera ....... 14 Attaching the Wrist Strap .............14 Attaching the Lens Cap ................ 14 Powering the Camera ............. 15 Charging the Battery .................... 15 Loading the Battery ...................... 16 Connecting an AC Adapter .......... 18 Storage Memory ...................... 19 Inserting a Memory Card .............. 20
Summary of the content on the page No. 16
Before Using the Camera Before using the camera, attach the wrist strap, and lens cap. Attaching the Wrist Strap A Pass the small loop of the strap through the strap eyelet and pass the other end through the loop as illustrated. Important • Do not swing the camera around by Note its strap. Attaching the Lens Cap A Push the lens cap on in the direction shown by the arrow. To remove the lens cap, take hold and push off. • Attach the lens cap to the strap to Note prevent it being lost. 14
Summary of the content on the page No. 17
Getting Started Powering the Camera This section explains how to load and recharge the battery and how to power the camera from a household electrical outlet. Charging the Battery When using the battery for the first time or when the battery symbol is 1 displayed, follow the procedure below and charge the battery to its full capacity. A Insert the connector of the power cord in the battery charger. B Insert the power plug at the other end of the power cord in the electrical outlet. C Set the bat
Summary of the content on the page No. 18
Loading the Battery Load the rechargeable lithium ion battery (DB-20L) to operate the camera. Important • When using the camera for the first time, be sure to charge the battery. Note (The battery is not charged when the camera leaves the factory.) → P.15 “Charging the Battery” A Check that the camera is turned off, and then open the battery cover by pressing the catch and sliding it in the direction shown. • P.24 “Turning On/Off the Camera” See B Load the battery. Important • Do not bring meta
Summary of the content on the page No. 19
Getting Started Tips Tips to Extend the Recording and Playback Times • The battery lives indicated on the previous page may decrease depending on the ambient environment. In an extremely cold environment, warming the battery by hand, for example, may allow you to take more pictures. • Increased use of the flash or zoom feature or the LCD monitor may speed up the exhaustion of the battery. Reduce their usage to a 1 minimum. • Copying or erasing images repeatedly may also accelerate the exhaustion
Summary of the content on the page No. 20
Connecting an AC Adapter When using the camera for extended periods of time to shoot or playback images, or connecting with a PC, connect an AC adapter (optional) to the camera and power the camera from a household electrical source. Using the AC Adapter Before using the AC adapter, be sure to read the safety precautions in the accompanying manual. A Check that the camera is turned off, and connect the AC adapter connection cable to the power supply terminal (DC input) on the camera. See • P.24
