Summary of the content on the page No. 1
MegaPixel IP Camera
Type numbers NWC-0700, NWC-0800, NWC-0900
en Manual_en
Summary of the content on the page No. 2
Summary of the content on the page No. 3
MegaPixel IP Cameras | en 1 Table of Contents 1Safety 3 1.1 Important safety instructions 3 1.2 Safety precautions 5 1.3 Important notices 5 2 Introduction 9 2.1 Product information 9 2.2 System requirements 9 2.3 Network switch or router 10 3 Camera reference 12 3.1 Introduction 12 3.2 Connectors 13 3.3 Housing and mounting 13 3.4 Network cabling 14 3.5 Optics 14 3.5.1 Using manual iris lenses 14 3.5.2 Auto-iris lenses 14 3.5.3 Using auto-iris lenses 14 3.6 Accessing cameras 15 3.6.1 Supported
Summary of the content on the page No. 4
2 en | MegaPixel IP Cameras 4.2.1 Toolbar 21 4.2.2 Selecting full/reduced resolution and zoom 23 4.2.2 Selecting Cameras 23 4.2.2 Full/Half camera resolution 23 4.2.2 Full size/Reduced size display 23 4.2.2 Zooming 23 4.2.3 Settings 24 4.2.4 Exposure 25 4.2.5 Image Quality 26 4.2.6 Archive 28 4.2.7 Motion Detection 28 4.2.8 Save to 31 4.2.9 Advanced 32 4.2.10 Permission 33 4.2.11 Remote Viewing 33 4.2.12 Day/Night 34 4.2.13 Auto-Iris 34 4.2.14 Right-click menu 35 4.2.15 User authentication 37 4.
Summary of the content on the page No. 5
MegaPixel IP CamerasSafety | en 3 1Safety 1.1 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist fluff-free cloth or leather shammy may also be used. Do not
Summary of the content on the page No. 6
4 en | Safety MegaPixel IP Cameras 10. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit. – For external power supplied units, use only the recom- mended or approved power supplies. – For limited power source units, this power source must comply with EN60950. Substitutions may damage the unit or cause fire or shock. – For 9-12 VDC units, voltage applied to
Summary of the content on the page No. 7
MegaPixel IP CamerasSafety | en 5 or, in the case of an authorization agreement, authority to operate the equipment. 1.2 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. ! If not avoided, this could result in serious bodily injury or death. CAUTIO
Summary of the content on the page No. 8
6 en | Safety MegaPixel IP Cameras Disposal - Your Bosch product was developed and manufac- tured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their work- ing life, must be collected and disposed of separately from household waste material. Separate collecting systems are usu- ally in place for disused electronic and electrical products. Please dispose of these units at an
Summary of the content on the page No. 9
MegaPixel IP CamerasSafety | en 7 NOTICE! This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accor- dance with the instruction
Summary of the content on the page No. 10
8 en | Safety MegaPixel IP Cameras NOTICE! This user guide has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the i user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the
Summary of the content on the page No. 11
MegaPixel IP CamerasIntroduction | en 9 2 Introduction Bosch MegaPixel® video cameras are state-of-the-art IP units designed to deliver full-motion, high definition digital video across local area networks. The DiBos software system accom- modates multiple cameras connected to a single video server and provides a variety of display and digital archiving modes. Delivering over 45 Mpixels/sec of crystal-clear imagery, Bosch MegaPixel cameras represent a superior alternative to low reso- lutio
Summary of the content on the page No. 12
10 en | Introduction MegaPixel IP Cameras –CPU: 3.0 GHz –RAM: 512 MB – Video Card: 1600x1200, 64 MB RAM – Network card: 100 base-T High performance, with best frame rate live viewing: – CPU: Dual CPU or DualCore 3.2 GHz –RAM: 1 GB – Video card: 1920x1200, 128 MB RAM (for NWC-0800 reso- lution) – Network card: 100 base-T, 2 network cards - one for cam- eras and one for other network functions Monitors, for full resolution live viewing: – 24-inch Wide Aspect Flat Panel LCD Monitor with Height Adj
Summary of the content on the page No. 13
MegaPixel IP CamerasIntroduction | en 11 www.dlink.com 10/100Base-TX 8 PoE ports and 8 non-PoE ports True IEEE 802.3af – "TRENDnet #TPE-S88 (POE Switch/Hub) www.trendnet.com 10/100Base-TX 8 PoE ports and 8 non-PoE ports True IEEE 802.3af – "PowerDsine #PD-6001/AC (PoE Single port hub) www.powerdsine.com 10/100Base-TX Single Midspan POE port True IEEE 802.3af NOTICE! PoE network equipment must be CE marked for use in Euro- pean Community. Note that the cameras are designed for use i with indoor
Summary of the content on the page No. 14
12 en | Camera reference MegaPixel IP Cameras 3 Camera reference 3.1 Introduction NWC-0700, NWC-0800 and NWC-0900 are megapixel resolution IP cameras capable of delivering crisp, low-noise images at a video frame rate. NWC-0700 is a 2-megapixel resolution camera having maximum resolution of 1600 by 1200 and achieving a maximum frame rate of 24. NWC-0800 is a 3.1-megapixel resolution camera having maxi- mum resolution of 2048 by 1536. It is typically viewed at 1920 by 1200 resolution with th
Summary of the content on the page No. 15
MegaPixel IP CamerasCamera reference | en 13 – Adjustable brightness, saturation, gamma, and sharpness – Simultaneous delivery of full-field view and zoomed images at video frame rate – Electronic image rotation by 180 degrees – On board motion detection – Auto iris on NWC-0700 and NWC-0800 3.2 Connectors NWC-0700, NWC-0800, and NWC-0900 have the following con- nectors located on the rear side of the camera housing: – LAN connector (100 Base-T). The LAN connector also accepts power-over-Ethern
Summary of the content on the page No. 16
14 en | Camera reference MegaPixel IP Cameras 3.4 Network cabling Category 5 cabling or better is recommended. All network cabling must be installed according to applicable codes and regulations. 3.5 Optics The MegaPixel cameras should be used with a 1/2" or larger optical format lens. The NWC-0900 requires two manual-iris lenses and has a limitation on lens diameter (<38mm). 3.5.1 Using manual iris lenses Choosing the lens correctly is very important for megapixel cameras. A poorly selecte
Summary of the content on the page No. 17
MegaPixel IP CamerasCamera reference | en 15 – When the iris is closed, the image should become visibly sharper. As the iris is gradually closed, the image bright- ness may fluctuate slightly. Note: You can monitor the state of the iris in the Bosch Video System "Settings" dialog. See Section 3.5.2 Auto-iris lenses for details. 3.6 Accessing cameras Cameras can be accessed and controlled by means of: – Bosch Video System software – HTTP requests issued from DiBos8 or Internet Explorer 3.6.1 S
Summary of the content on the page No. 18
16 en | Software MegaPixel IP Cameras 4Software DiBos 8 provides viewing and recording functions for standard analog as well as Network-connected cameras. DiBos8 supports full-resolution recording of the Bosch Megapixel cameras. At playback, the full resolution can be utilized by zooming in on the area of interest. In addition, live viewing supports the zoom function to select display of detail. Refer to DiBos8 manuals for further information. A typical system consists of a number of camer
Summary of the content on the page No. 19
MegaPixel IP CamerasSoftware | en 17 – Video System: live viewing for setting up the camera parameters and motion detection function of the installed cameras; – Camera Upgrade: for loading firmware upgrades into the Megapixel cameras. Note: The software is installed in C:\Program Files\Bosch 4.1.1 Configure firewall As you start the application, your PC may prompt you to permit access to the network. Bosch Video System includes two appli- cations that need access to the network: – AVInstalle
Summary of the content on the page No. 20
18 en | Software MegaPixel IP Cameras 4.1.3 Camera installer Camera Installer allows you to find all cameras that are present on the local area network, assign IP addresses to the detected cameras, and to verify that the cameras are accessible and operational. Camera Installer saves information about installed cameras into a dedicated file used by Video System. Camera Installer supports two modes of operation - Basic and Advanced. – Basic mode - In this mode, Camera Installer detects all
