Summary of the content on the page No. 1
PLEASE THINK BEFORE YOU PRINT
SMART Document Camera 330
User’s Guide
Summary of the content on the page No. 2
Product registration If you register your SMART product, we’ll notify you of new features and software upgrades. Register online at smarttech.com/Product+Registration. Keep the following information available in case you need to contact SMART Technical Support. Serial Number: ________________________________________________ Date of Purchase: ________________________________________________ FCC warning This equipment has been tested and found to comply with the limits for a Class B digital devi
Summary of the content on the page No. 3
Important information WARNING – Failure to follow the installation instructions shipped with your SMART product can result in personal injury and damage to the product. – Ensure that any cables extending across the floor to your SMART product are properly bundled and marked to avoid a trip hazard. – Do not push foreign objects into the openings on your document camera. – Do not open or disassemble your SMART product. You risk electrical shock from high voltage. Opening the casing also voids
Summary of the content on the page No. 4
ii | – Do not carry your SMART product by the camera arm. Carry it by the base of the unit. – Disconnect your SMART product from the power outlet before cleaning it. Use a clean damp cloth and do not use liquid or aerosol cleaners or solvents when cleaning your SMART product. – Only use your SMART product with the type of power source that is written on the power supply and do not modify the plug. – Do not aim the camera lens at the sun. – When replacing parts in your document camera, ensur
Summary of the content on the page No. 5
Contents Important information........................................................................................i 1 Overview ............................................................................................................... 1 About your SMART Document Camera 330................................................... 1 Parts of the document camera........................................................................ 3 Document camera software......................................
Summary of the content on the page No. 6
iv | – CONTENTS Using the SD Card view on-screen display menu.........................................38 7 Troubleshooting...................................................................................................45 A Hardware environmental compliance ..................................................................47 Waste Electrical and Electronic Equipment regulations (WEEE directive)....47 Restriction of Certain Hazardous Substances (RoHS directive) ...................47 Packaging .
Summary of the content on the page No. 7
Chapter 1 Overview About your SMART Document Camera 330 Your SMART Document Camera 330 allows you to display 3D objects, printed documents and microscope slides on your computer, projector or television. You can capture images and save them to a SMART Notebook™ collaborative learning software file or to an SD or SDHC memory card. Your document camera integrates with SMART Notebook software and SMART Board™ interactive whiteboards, creating an interactive presentation environment. Topics in
Summary of the content on the page No. 8
2 | CHAPTER 1 – OVERVIEW Document camera features Camera • High resolution 1.3 MP CMOS sensor • 5.2× optical zoom, 8.0× digital zoom • Up to 30 frames per second • Automatic or manual focus • Microscope mode that doesn’t require adapters Output • SXGA, WXGA, 720p or XGA resolution • DVI-D output Physical construction • Security lock slot • Collapsible design for easy transport and storage • Bright LED camera lamp Software • SMART Notebook software • SMART Product Drivers • Image Mate® software
Summary of the content on the page No. 9
3 | CHAPTER 1 – OVERVIEW • SD Card view controls your document camera from the camera’s control panel and displays images from an SD or SDHC memory card on a connected projector or television. See Understanding Computer, Camera and SD Card views on page 14 for more information on these views. Parts of the document camera Adjustable camera arm and camera head You can unfold and adjust the camera arm. You can also rotate the camera head to display objects at range of angles. The camera head ha
Summary of the content on the page No. 10
4 | CHAPTER 1 – OVERVIEW Control panel You can use the control panel to switch between Computer, Camera and SD Card view, capture an image to an SD or SDHC memory card and adjust brightness settings. You can also use it to control features and settings in the Camera view or the SD Card view’s on-screen display menu. On-Screen Display Menu Power Enter Navigation Arrow Menu Capture Computer View Increase Brightness Camera View* Decrease Brightness SD Card View *On some cameras, Camera View is
Summary of the content on the page No. 11
5 | CHAPTER 1 – OVERVIEW Side connection panel The side connection panel has a security lock slot, an SD or SDHC memory card slot, a USB-A connector, a switch for selecting VGA, DVI-D or composite video output, and a switch to select either SXGA, WXGA, 720p or XGA resolution. SD K SXGA / WXGA / 720p / XGA Switch USB-A Connector Security Lock Slot SD or SDHC Memory Card Slot VGA DVI-D / Composite Switch NTSC/PAL switch The NTSC/PAL switch is located on the bottom of your document camera. This s
Summary of the content on the page No. 12
6 | CHAPTER 1 – OVERVIEW Anti-glare sheet Place the anti-glare sheet over printed documents to reduce glare. Document camera software Your document camera includes software downloads that will help you present images from your document camera. SMART Notebook software and SMART Product Drivers Your document camera uses SMART Notebook collaborative learning software and SMART Product Drivers. SMART Notebook is presentation software designed to work with SMART Document Cameras and the touch fe
Summary of the content on the page No. 13
Chapter 2 Setting up your document camera This chapter describes the following set up tasks for your document camera: • Document camera basic connection on page 8 • Setup configurations for Camera view and SD Card view on page 9 – The document camera and computer use different displays on page 9 – The document camera and computer share a display on page 9 • Connecting your document camera to an external display on page 10 – Connecting to a projector or flat-panel display on page 10 – Connecting
Summary of the content on the page No. 14
8 | CHAPTER 2 – SETTING UP YOUR DOCUMENT CAMERA Document camera basic connection Connect your document camera to a power supply and your computer to use your document camera with SMART Notebook software. IMPORTANT This configuration requires SMART Notebook to use your document camera. Connect your document camera directly to an external display to use Camera view or SD Card view. To connect the 1. Connect the power supply cable to the power supply 12V DC receptacle on the rear connection p
Summary of the content on the page No. 15
9 | CHAPTER 2 – SETTING UP YOUR DOCUMENT CAMERA Setup configurations for Camera view and SD Card view After you complete the basic connection procedure (see page 8), you can connect your document camera to an external display. This enables you to use the document camera in Camera view and SD Card view. See page 14. You can connect your computer and your document camera to different displays or they can share a display. The document camera and computer use different displays In this configura
Summary of the content on the page No. 16
10 | CHAPTER 2 – SETTING UP YOUR DOCUMENT CAMERA Connecting your document camera to an external display You can connect your document camera directly to an external display to enable the following functions: • Use Camera view to view the camera image in full-screen on the external display. • Use SD Card view to view a full-screen slide show on the external display. • Access the Camera view’s or SD Card view’s on-screen display menus. Connecting to a projector or flat-panel display You can con
Summary of the content on the page No. 17
11 | CHAPTER 2 – SETTING UP YOUR DOCUMENT CAMERA Connecting to a digital projector or HD display with DVI-D You can connect your document camera to a digital projector or high-definition display using a DVI-D single link cable. NOTE • Do not use a DVI-I or DVI-A cable. • You can use a DVI-D dual link cable, but it will function as a single link DVI-D. • If you connect your document camera directly to a projector or high definition display with a DVI-D cable, you will display only the camera im
Summary of the content on the page No. 18
12 | CHAPTER 2 – SETTING UP YOUR DOCUMENT CAMERA Setting output resolution You can set your document camera’s output resolution to match the projector or display you’re using. To set the Set the SXGA/WXGA/720p/XGA switch to match the resolution of your display. Refer output resolution to the chart below to determine the output resolution you need. Setting Resolution SXGA 1280 × 1024 WXGA 1280 × 800 720p 1280 × 720 XGA 1024 × 768 Downloading software Your document camera includes software downl
Summary of the content on the page No. 19
Chapter 3 Using your document camera This chapter describes how to use your document camera and perform the following tasks: • Understanding Computer, Camera and SD Card views on page 14 – Identifying view features on page 15 – Setting document camera views on page 16 • Performing basic operations on page 16 – Positioning your document camera on page 16 – Turning your document camera on and off on page 16 – Using the LED light on page 17 – Using your document camera with SMART Notebook softwar
Summary of the content on the page No. 20
14 | CHAPTER 3 – USING YOUR DOCUMENT CAMERA Understanding Computer, Camera and SD Card views You can use your document camera in Computer, Camera and SD Card views. Each view allows you do different things and requires a specific connection to either a display, projector or computer. Computer view Connect your document camera to your computer with the included USB 2.0 cable, and then set your document camera to Computer view to view document camera images only in SMART Notebook collaborati
