Summary of the content on the page No. 1
SUMMARY MANUAL
VDC-HD3500P/HD3500
VDC-HD3300P/HD3300
VDC-HD3100P/HD3100
VCC-HD3500/HD3300
Side B
Megapixel Camera
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED
SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL
CODES.
Please read this instruction manual carefully in order to ensure correct installation.
In addition, be sure to read carefully the electronic manual (INSTRUCTION MANUAL)
contained in the supplied CD-ROM to ensure correct operation of the camera.
Deutsch Español Français English
Summary of the content on the page No. 2
Table of Contents Name and Function of Each Component .................................................................2 Lens Adjustment .......................................................................................................3 Network Settings ......................................................................................................5 Specifications ........................................................................................................... 7 Copyright No
Summary of the content on the page No. 3
Name and Function of Each Component ■ Top Face Dome cover Monitor Output Socket Inner cover SD Card Slot (VDC-HD3500P/HD3500) LED lamp (VDC-HD3500P/HD3500) The power indicator blinks to indicate the following camera statuses. Recording to SD memory card stopped Firmware update in progress An SD memory card error occurred (Fast blink) Operation Buttons Restarting camera: Press the RESET button. OPTION SETTINGS (CAMERA REBOOT) Restoring factory default settings: Press the N
Summary of the content on the page No. 4
Lens Adjustment Focus can be electrically adjusted. For high-resolution megapixel images, the focus assist function is useful to obtain a precise focus because otherwise it is extremely difficult. The focus must be readjusted if the camera has lost focus due to difference in the subject distance or ambient temperature, the deterioration of the lens and installation environment, and the like that have been caused over the years. Press the SET button for 2 seconds or more. The monitor now sh
Summary of the content on the page No. 5
Lens Adjustment ■ Adjusting focus NEAR FAR SET Roughly focus the subject using NEAR/FAR buttons. Make adjustment while watching the monitor. Press the SET button. The camera automatically focuses on the subject. Note that the color of the status indicator “FOCUSING” turns from black to orange. The status indicator changes to “ERROR” when the subject cannot automatically come into focus. In this case, manually adjust the focus. ( Electronic manual) Press the NEAR/FAR button to adjust the
Summary of the content on the page No. 6
Network Settings Preparing Your Computer for Network Operation Check your operating environment. ( Page 1) Connect the camera to the network to which your PC is also connected. Configue the network information on your PC. Configure information such as the IP address of your PC. Install the “H.264 Plug-in” from the supplied CD-ROM onto your PC. You are now ready to monitor the surveillance video in the H.264 format. Start Internet Explorer. The supported Web browser is Internet Explorer Ver
Summary of the content on the page No. 7
Network Settings Type your user name and password and click [OK]. The language selection screen appears. If this is the first access to the camera, log in as an admin user (administrator) using the following default authentication information. User name: admin Password: admin Click the button corresponding to the language you want to use. The live screen appears. From the second login onwards, the live screen appears automatically by skipping the language selection screen. If this is the
Summary of the content on the page No. 8
Specifications ■ Camera Image pickup device 1/3" CMOS sensor Effective pixels 16:9 1920 (H)×1080 (V), 4:3 2288 (H)×1712 (V) Lowest image illumination 50IRE: 1.0 lx (at F1.2, color mode, high gain) 50IRE: 0.1 lx (at F1.2, black-and-white mode, high gain) Video S/N ratio 50dB (when AGC is “OFF”) Lens Built-in vari-forcal lens f=3 to 9 mm, F1.2 to 2.1 Focus adjustment Focus assist function Iris control DC iris lens supported Digital PTZ Enables electronic pan, tilt, and zoom operations on (VDC-HD3
Summary of the content on the page No. 9
Specifications ■ Network Image/video compression H.264/JPEG Video size (H.264) (16:9) 1920×1080, 1280×720, 640×360, 320×180 (4:3) 1600×1200, 1280×960, 1024×768, 640×480, 320×240 Video size (JPEG) (16:9) 1920×1080, 1280×720, 1024×576, 640×360 (4:3) 2288×1712, 1600×1200, 1280×960, 1024×768, 800×600, 640×480, 320×240 Picture quality QUALITY mode: BASIC, NORMAL, ENHANCED, FINE, SUPER FINE BITRATE mode: User-specified bit rate Interface 10BASE-T/100BASE-TX Protocol TCP/IP, UDP, HTTP, HTTPS, SMTP
Summary of the content on the page No. 10
Copyright Notice The instruction manual and the software are copyrighted by SANYO Electric Co., Ltd. No materials contained in the manual and the software may, wholly or partially, be copied, modified, reproduced, or distributed in any format without the prior permission of the copyright holder. Microsoft, Windows, ActiveX and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. ® ® The official name for “Windows” used i
