Summary of the content on the page No. 1
User’s Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera and
MP3 player, including capturing images,
downloading images, playing music and using the application software.
ENGLISH
Summary of the content on the page No. 2
Instructions ■ Use this camera in the following order Before connecting the camera to a PC, via the USB Set up the cable, you will need to set up the camera driver. Install the camera driver that is contained in camera driver Application software CD-ROM. (p.127) Take a picture. (p.23) Take a picture Insert the supplied USB cable into the PC’s USB Insert the port and the camera’s USB connection terminal. (p.136) USB cable Check the camera’s power. If the power is turned off, Check the press th
Summary of the content on the page No. 3
Contents ●Voice memo/ UP button 32 READY ●Macro/ Down button 33 ●Focus lock 35 ●Getting to know your camera 5 ●Flash / Left button 36 ●Danger/ Warning 6 ●Self-timer/ Right button/ 38 ●Caution/ An FCC warning 7 ●MENU/ OK button 39 ●System chart 8 ● M (Mode) button 39 ●Identification of features 10 ●SF button 41 ●Cradle 11 ●+/- button 42 ●Connecting to a Power Source 13 ●Using the LCD monitor to adjust the ■Using the SAC-41 14 camera settings 46 ■How to charge the rechargeable battery ●How to use
Summary of the content on the page No. 4
Contents ●Play & Pause/ Down button 70 ●LCD monitor indicator for MP3 mode 109 ●Delete button 70 ●Using the camera buttons to adjust the ●Left/ Right/ Menu/ OK button 71 camera 110 ●Album button 72 ●Playlist button 110 ●Setting up the play back function using the ●Hold button 111 LCD monitor 75 ●Volume button 112 ●Starting the slide show 78 ●Control button 112 ●Protecting images 80 ●Delete button 112 ●Deleting images 81 ●Setting up the play back function ●Resize 82 using the LCD monitor 113 ●Ef
Summary of the content on the page No. 5
Getting to know your camera Thank you for buying a Samsung Digital Camera. ● Prior to using this camera, please read the user manual thoroughly. ● When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.) to the A/S centre. ● Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no responsibility for
Summary of the content on the page No. 6
Danger ■ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ■ Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion. ■ Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and
Summary of the content on the page No. 7
Caution ■ Leaking, overheating, or burst battery could result in fire or injury. •Use battery with the correct specification for the camera. •Do not short circuit, heat or dispose of battery in fire. •Do not insert the battery with the reverse polarities. ■ Remove the battery when not planning to use the camera for a long period of time. Battery may leak corrosive electrolyte and permanently damage the camera’s components. ■ Do not fire the flash while it is in contact with hands or objects. D
Summary of the content on the page No. 8
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > User manual, Software CD Camera case Camera strap Product warranty (see p.125, 126) DPOF compatible SD memory card/MMC printer (see p.84) (see p.18) Rechargeable battery (SLB-0737) AC cord Charger (SBC-L5) Cradle AC cord SAC-41 ※ The charger (
Summary of the content on the page No. 9
System chart System Requirements For Windows •Windows 98/ 98SE/ 2000/ ME/ XP •PC with processor better than Pentium II 450MHz (Pentium 700MHz or better is recommended) PictBridge compatible Computer •200MB of available hard-disk space printer(see p.89) (Over 1GB is recommended) •Minimum 64MB RAM (XP : 128MB) •1024x768 pixels, 16-bit colour display compatible monitor (24-bit colour display recommended) •DirectX 9.0 or later •USB port •CD-ROM drive For Macintosh AV cable USB cable •Power Mac G3
Summary of the content on the page No. 10
Identification of features Front & Top SF mode button/ Shutter button Hold button Microphone Power button Flash Speaker Self-timer lamp/ Optical 3X zoom lens/ Auto Focus lamp Lens cover ※ Take care not to press the lens, lens cover and camera by force. This may cause the camera malfunction. Back & Bottom Zoom W button (Thumbnail, Vol. Down) M(Mode/Album) button Zoom T button (Digital zoom, Vol. Up) Camera status Earphones Jack lamp Play mode button LCD monitor Strap eyelet 5 function button DC/U
Summary of the content on the page No. 11
Identification of features Bottom / 5-function button Memory card slot Voice memo/ UP button MENU/ OK button FLASH/ SELF-TIMER/ LEFT button RIGHT button Battery chamber Battery holder Macro/ DOWN button Battery chamber cover Play & Pause button Cradle ■ You can recharge your rechargeable battery, transfer a captured image to print, and download images with the cradle. (Refer to page 14, 89 and 136) ● Top Camera connection terminal ● Back DC connection USB port terminal AV connection terminal 《11
Summary of the content on the page No. 12
Identification of features ■ Self-timer lamp Icon Status Description Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. For the first 8 seconds, the lamp blinks at 1 second intervals. Blinking For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds later a Blinking second picture will be taken. ■ Camera Status Lamp Status Description The lamp turns on and off when the camera is ready to Po
Summary of the content on the page No. 13
Connecting to a Power Source ■ You should use the rechargeable battery (SLB-0737) supplied with the camera. Be sure to charge the battery before using the camera. ■ SLB-0737 rechargeable battery Specification Model SLB-0737 Type Lithium Ion Capacity 760mAh Voltage 3.7V Charging time Approx. 150 MIN (Using the SAC-41) ■ Number of images and battery life Still image Movie MP3 Battery life Number of images Recording time Playing time Approx. 75 MIN Approx. 150 Approx.65 MIN About 240 min. Using
Summary of the content on the page No. 14
Connecting to a Power Source Using the SAC-41 If you have access to a mains supply, using an SAC-41 allows the camera to be used for long periods of time. Plug the SAC-41 into the DC connection terminal on the camera or cradle. Before turning on the camera power with an SAC-41, insert the rechargeable battery that was charged for over 10 minutes with turning off the camera. DANGER ● Always turn off the power before taking the SAC-41 out of the mains supply. ● As with all mains powered devices,
Summary of the content on the page No. 15
Connecting to a Power Source ■ How to charge the rechargeable battery (SLB-0737) with the SAC-41. ● Charging with the camera 1. Insert the rechargeable battery into the battery chamber. 2. Put the SAC-41 into your power socket and DC connection terminal of the camera. Charging LED ■ Important information about battery (SLB-0737) charging with the SAC-41 ● If the charging LED of the SAC-41 does not turn on or blink after inserting the rechargeable battery, please check whether the battery are ins
Summary of the content on the page No. 16
Connecting to a Power Source ■ Charging LED of the SAC-41 Status Using the cradle Direct to the camera Being Charged Red LED is on Red LED is on Charging is complete Green LED is on Green LED is on Charging error Red LED is off or blinking Red LED is off or blinking ● If there is a charging error, please check all the power connections are in place. ● A USB cable for transmitting data can’t be used for charging the rechargeable battery. ● A USB cable for recharging the battery is optional. - W
Summary of the content on the page No. 17
Connecting to a Power Source : If the camera does not turn on after you have inserted battery, please Using the battery check whether the battery are inserted with the correct polarity(+/-). 1. Open the battery chamber cover by pushing in the direction of the arrow. 2. Insert the battery taking note of the polarity (+ / -). 3. To close the battery chamber cover, push it until it clicks. Removing the battery 1. Turn off the camera power. Open the battery chamber cover and move the battery holde
Summary of the content on the page No. 18
Instructions on how to use the memory card ● Be sure to format the memory card (see p.97) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ● Turn off the camera power whenever the memory card is being inserted or removed. ● Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory
Summary of the content on the page No. 19
Instructions on how to use the memory card INFORMATION ● Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. ■ The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the MMC Cards. The SD memory card has a write protect switch Card pins that prevents image files from being deleted or formatted. By sliding the switch to the bottom of Write the SD memory card, the data will
Summary of the content on the page No. 20
Inserting the memory card 1. Turn off the camera’s power and pull the battery chamber cover in the direction of the arrow to open. 2. Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor), and then push the memory card into the card slot until you hear a click. 3. To close, push the battery chamber cover until you hear a click. If the memory card does not slide in smoothly, do not attempt to insert it by force
