Radio Shack Wildview STC-TGL5M user manual

User manual for the device Radio Shack Wildview STC-TGL5M

Device: Radio Shack Wildview STC-TGL5M
Category: Digital Camera
Manufacturer: Radio Shack
Size: 0.2 MB
Added : 5/4/2014
Number of pages: 33
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Radio Shack Wildview STC-TGL5M. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Radio Shack Wildview STC-TGL5M.

For your convenience

If looking through the Radio Shack Wildview STC-TGL5M user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Radio Shack Wildview STC-TGL5M on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Radio Shack Wildview STC-TGL5M to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Radio Shack Wildview STC-TGL5M User manual - Online PDF
Advertisement
« Page 1 of 33 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Radio Shack Wildview STC-TGL5M but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Radio Shack Wildview STC-TGL5M. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1



STC-TGL2M / STC-TGL4M / STC-TGL5M
User’s Manual



















Toll Free Customer Support 1-888-304-6125
www.wildviewcam.com
Version 1.3 06/07

Summary of the content on the page No. 2

Wildview Series For Customer Service or Warranty Information Call Toll Free 888-304-6125 WILDVIEW P.O. Box 535189 Grand Prairie, Texas 75053-5189 Wildview Limited Warranty Your Wildview scouting camera is covered by a 90 days Limited Warranty on parts and labor from the date of original purchase, and purchases must be made through an authorized dealer. The warranty covers defects in workmanship and materials. The warranty does not apply to units, which have been damaged or abused i

Summary of the content on the page No. 3

Wildview Series Manual Contents Camera overview 4 Camera kit contents 6 Battery and memory Installation 6 Definition 10 Programming 11 Mounting the camera 14 Viewing images 18 Saving and Deleting images 21 Memory compatibility chart 24 Technical Specs 25 General Information 28 Image Capacity Chart 30 www.wildviewcam.com Toll Free 888-304-6125 3

Summary of the content on the page No. 4

Wildview Series Camera overview Front view Side view www.wildviewcam.com Toll Free 888-304-6125 4

Summary of the content on the page No. 5

Wildview Series Open view image with major parts indication www.wildviewcam.com Toll Free 888-304-6125 5

Summary of the content on the page No. 6

Wildview Series Camera kit contents • Wildview series Digital Scouting Camera • Camera driver • User Manual • USB cable • Strap Battery & memory installation Warning: Do not use a different Voltage lead acid battery other than the one specified in this section. Doing so will damage the camera and will void the warranty. The Wildview Digital Scouting Camera is designed to operate using alkaline batteries for optimum performance. www.wildviewcam.com Toll

Summary of the content on the page No. 7

Wildview Series NOTE: Always have camera in the OFF position when installing or removing batteries. Batteries “C” cell The internal battery compartment accepts 4 “C” cell batteries. Be sure to use high quality brand name alkaline batteries. Install batteries with correct polarity (+/-) as noted inside the battery compartment. 12V Lead Acid external battery The Wildview Scouting Camera is equipped with an external power jack designed to accept a barrel plug cable to attach to a sea

Summary of the content on the page No. 8

Wildview Series Please make sure the voltage and polarity (+/-) are correct before connection. Incorrect voltage or polarity (+/-) will damage the camera. Memory Options Your Wildview scouting camera is equipped with the following: Model SDRAM STC-TGL2M 16MB STC-TGL4M 32MB STC-TGL5M 32MB The camera is also equipped with an expandable media card slot capable of accepting up to 2GB* SD card (sold separately). With no memory card inserted into the slot, the camera will use the

Summary of the content on the page No. 9

Wildview Series of images on the built in memory unless the expansion card is inserted at which point the front counter will only display the number of images stored in the expansion card. Inserting SD card Make sure camera is in the OFF position whenever adding or removing memory. • Insert SD memory card in to the SD card slot completely and in the correct direction as shown on the inside of the housing. • To remove the SD memory card, depress the SD card and pull out the card gen

Summary of the content on the page No. 10

Wildview Series Definition • Time out: To set the amount of preset time in minutes the camera will sleep between PIR triggering • Resolution: The resolution selection that you have selected. Model Hi Low STC-TGL2M 2.0M 0.3M STC-TGL4M 4.0M 1.3M STC-TGL5M 5.0M 3.0M • Date/Time: To set date and time stamp in the picture • Flash: Auto / On / Off mode • Burst: To set the number of pictures the camera will take per PIR triggering o 1P: Single image capturing per PIR triggering o 2P: T

Summary of the content on the page No. 11

Wildview Series o 3P: Three images continuous capturing per PIR triggering o AVI: 10 second video clip per PIR triggering • FULL: When memory capacity is full, this front LCD screen will show “FULL” Programming your Wildview Camera The following setting must be performed before you turn on the camera. 1. Select the time out interval by sliding the time out toggle switch to the desired preset time interval in minutes. 1 / 5 / 10 / 20 minutes. 2. Select the resolution setting by sl

Summary of the content on the page No. 12

Wildview Series conditions. b. On – Flash on for every image captured c. Off – No Flash will go off. 4. Select Burst mode: Slide the switch to 1 / 2 / 3 / AVI position. If you choose AVI mode, the camera will automatically switch to 1 picture mode if it detects a low light source. 5. Turn on the Camera to set the Date / Time stamp a. Slide the power switch to the PIR position b. Press and hold [SET] button for 2 seconds to enter date & time setting mode. c. Time and HH will blink.

Summary of the content on the page No. 13

Wildview Series f. Press [SET] button to enter date setting. Date & DD will blink. Press [UP] or [DN] to adjust date. g. Press [SET] button to enter year setting. Date & YY will blink. Press [UP] or [DN] to adjust year. h. Press and hold [SET] button for 2 seconds to exit the setting mode and enter into PIR count down mode. Display will show date and number of picture taken. Once the program setting has been completed, slide the power switch to OFF position until you are ready

Summary of the content on the page No. 14

Wildview Series Mounting the camera It is recommended that you mount the camera 4-5 ft off the ground with the camera pointed at a slight downward angle. Be sure to avoid mounting the camera facing east or west as the rising and setting of the sun could produce false triggers and overexposed images. Clear branches and other debris away from the front of the camera so as not to block the camera lens or PIR sensor. PIR Coverage Area Diagram www.wildviewcam.com

Summary of the content on the page No. 15

Wildview Series Mounting the camera with the supplied strap • Insert the strap through the strap slots on the rear housing. • Wrap the strap around the mounting surface. Secure the strap and tighten the buckle in order to secure the camera. www.wildviewcam.com Toll Free 888-304-6125 15

Summary of the content on the page No. 16

Wildview Series In order to obtain proper weather resistance, please make sure that both door latches are securely locked in place. Testing the camera coverage area One of Wildview Scouting Camera’s features is the ability to test the coverage area. • After mounting the camera, open front housing and slide the power switch to Test position. The front LCD will display the word “tESt”. • Close the front housing. • Walk around in the front of the camera to see if you have mounted the

Summary of the content on the page No. 17

Wildview Series • When you have completed testing the coverage area, open the front housing and slide the power switch from Test position to PIR position. Front LCD counter will show “0000”. The camera will enter count down mode for 1 minute and the front green indicator will start blinking, giving you one minute to leave the coverage area. Then camera will enter PIR detection mode. NOTE: Make sure you slide the power switch from TEST mode to PIR mode before you leave the field. Oth

Summary of the content on the page No. 18

Wildview Series Viewing images Viewing images by computer download The Wildview Scouting Camera is a plug and play USB storage device. This means users of Windows 2000 /ME / and XP operating systems need not install the camera driver. This camera is not MAC compatible. The CD-ROM included in this package contains the camera driver for older operating system only. Attention The software CD-ROM packaged with the camera is designed for PC’s only (not MAC compatible). Playing this CD-RO

Summary of the content on the page No. 19

Wildview Series • Follow the instructions shown on screen from your PC to completely install the driver and application program. • If the existing DirectX version on your PC is lower than version 8, and if you have problems viewing the image with the standard software provided by Microsoft, then you should install DirectX 8 • Restart windows. • Turn off the camera • Connect your camera to the PC by the USB cable, the PC will recognize the new device and set up the configuration of th

Summary of the content on the page No. 20

Wildview Series • If your computer doesn’t run automatically, please click “Start” button and choose “Run”, and then browse the CD drive and click “Setup”. Viewing the images on your computer • Slide the power switch to OFF position. • To view the images simply plug one end of the USB cable into an available USB port on your computer. • Plug the other end of USB cable into the camera. The camera will automatically power ON. Front LCD screen will show “USb” • At the same time


Alternative user manuals
# User manual Category Download
1 Radio Shack 49-2515 User manual Digital Camera 6
2 Radio Shack Gigaware 25-1177 User manual Digital Camera 14
3 Radio Shack Gigaware 25-298 User manual Digital Camera 15
4 Radio Shack Gigaware 25-1178 User manual Digital Camera 2
5 Radio Shack Gigaware 25-1176 User manual Digital Camera 4
6 Radio Shack FLATFOTO B-020405 User manual Digital Camera 31
7 Radio Shack OPTIMUS 16-3869 User manual Digital Camera 0
8 Radio Shack Gigaware 25-157 User manual Digital Camera 114
9 Radio Shack Gigaware 25-494 User manual Digital Camera 8
10 Radio Shack Wildview STC-TGL4M User manual Digital Camera 7
11 Radio Shack Wildview STC-TGL2M User manual Digital Camera 11
12 Radio Shack 16-3898 User manual Digital Camera 0
13 Sony 3D Bloggie MHS-FS3 User manual Digital Camera 35
14 Sony 838 MHz to 862 MHz User manual Digital Camera 7
15 Sony 4-133-499-11 (1) User manual Digital Camera 15
16 Sony 4-187-045-11(1) User manual Digital Camera 1
17 Sony 4-132-058-11(1) User manual Digital Camera 5