Summary of the content on the page No. 5
• The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a fault. • Remove dust from the lens and viewfinder using a blower or clean off dust using a lens brush. • Periodic checks are recommended every 1 to 2 years in order to maintain high-performance. • When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such
Summary of the content on the page No. 6
Contents FOR SAFE USE OF YOUR CAMERA .............................................1 Care to be Taken During Handling ...................................................2 Contents ...........................................................................................4 Contents of the operating manual ....................................................7 Checking the Contents of the Package ............................................8 Names of Parts............................................
Summary of the content on the page No. 7
Changing the AF Area (Focusing Area) .........................................47 Setting the Light Metering Range to Determine the Exposure (AE Metering) .................................................................................48 Setting the Sensitivity .....................................................................49 Setting the Instant Review time (Instant Review) ...........................50 Setting the Image Sharpness (Sharpness).....................................50 Setting
Summary of the content on the page No. 8
Erasing All Images..........................................................................98 Protecting Images from Deletion (Protect) .....................................99 Viewing Images on a TV ...................................................................100 Setting the Printing Service (DPOF)................................................101 Printing Single Image ...................................................................101 Printing All Images..............................
Summary of the content on the page No. 9
Contents of the operating manual This Operating manual contains the following chapters. 1 1 Getting Started –––––––––––––––––––––––––––––––––––– This chapter explains what you need to do after purchasing the camera before you start taking pictures. Be sure to read it and follow the instructions. 2 2 Quick Start ––––––––––––––––––––––––––––––––––––––– This chapter explains the simplest way to take pictures and play back images. Use it if you want to start taking pictures straightaway. It also
Summary of the content on the page No. 10
Checking the Contents of the Package Camera Lithium-ion battery D-LI7 Battery charger Optio 555 Rechargeable (∗) D-BC7 (∗) USB cable AV cable AC plug cord I-USB7 (∗) I-AVC7 (∗) D-CO2 (∗) 3D Image Viewer Software (CD-ROM) Strap O-3DV1 S-SW13 O-ST5 (∗) Digital Camera Operating Manual (PC Connection Manual) Viewing Your Digital Camera Images On Your PC To ensure the best performance from your camera, please read the Operating Manual before using the camera. Operating Manual Operating Manual (
Summary of the content on the page No. 11
Names of Parts Front Remote control receiver Shutter release button Self-timer lamp Power switch Autofocus window Speaker Viewfinder Built-in flash Microphone Lens Back Viewfinder LCD monitor Strap lug Terminal cover USB / AV output terminal DC input terminal Battery lock lever Battery / card cover Tripod socket 9
Summary of the content on the page No. 12
Names of Operating Parts Diopter adjustment lever b/Z button (/DPOF button Power switch Shutter release button Mode dial Zoom/f/y button )/i button Playback button OK button Four-way controller (2345) Display button Focus status lamp (green) Flash status lamp (red) Menu/Fn button Guide indications A guide to available button operation is displayed on the LCD monitor during operation. The buttons are indicated as shown below. Zoom/f/y button Four-way controller (2) 2 (Only for digital zoom and
Summary of the content on the page No. 13
Getting Started Getting Started Attaching the Strap 1 Pass the narrow end of the strap through the strap lug and pass the other end through the loop. 11
Summary of the content on the page No. 14
Getting Started Powering the Camera Battery 1 Charging indicator To power outlet 2 3 Battery charger 1 AC plug cord Charging the Battery When using the camera for the first time or when the [Battery depleted.] message is displayed, charge the battery. 1 Connect the AC plug cord to the battery charger. 2 Plug the AC plug cord into the power outlet. 3 Place the battery in the charger with the label facing up. The charging indicator lights red while the battery is charging and changes to green w
Summary of the content on the page No. 15
Getting Started 2 1 Battery 1 Battery / card cover Battery lock lever 2 Installing the Battery Install the battery provided. When using the camera for the first time, charge the battery before installing. 1 Slide the battery / card cover in the direction indicated by the arrow to open the battery / card cover. 2 Insert the battery with the label facing towards the lens while using the side of the battery to press the battery lock lever in the direction indicated by the arrow. Check that it
Summary of the content on the page No. 16
Getting Started Approximate Operating Time (when the D-LI7 battery is fully charged) Number of recordable images:Approx. 400 (when 50% shooting uses flash, LCD monitor ON) 1 Playback time : Approx. 210 min. The description above is based on Pentax measuring conditions and may vary depending on capture mode and shooting conditions. • Generally, battery performance is temporarily deteriorated as temperature decreases. When the camera is used in a cold environment, keep this product warm by h
Summary of the content on the page No. 17
Getting Started AC adapter To power outlet 1 4 1 3 Terminal cover 2 AC plug cord Using the AC Adapter (optional) Use of the AC adapter D-AC7 (optional) is recommended if you intend to use the LCD monitor for a long time or connect the camera to a PC or printer. 1 Make sure that the camera is turned off and opening the terminal cover. 2 Connect the DC terminal on the AC adapter to the DC input terminal on the camera. 3 Connect the AC plug cord to the AC adapter. 4 Plug the AC plug cord into t
Summary of the content on the page No. 1
Digital Camera
Operating Manual
To ensure the best performance from
your camera, please read the Operating
Manual before using the camera.
Summary of the content on the page No. 2
Thank you for buying the Pentax Optio 555 Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities. Regarding copyrights Images taken using the Optio 555 that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take ca
Summary of the content on the page No. 3
FOR SAFE USE OF YOUR CAMERA Sufficient attention has been paid to the safety of this product but please pay particular attention to the warnings indicated by the following symbols during use. This symbol indicates that it is possible that the user Warning may experience serious difficulties if the warnings are not heeded. This symbol indicates that it is possible that the user Caution may experience minor or middling difficulties or physical difficulties if the warnings are not heeded. Wa
Summary of the content on the page No. 4
Caution • Never try to disassemble, short the battery. Also, do not dispose of the battery in fire, as it may explode. • Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal. • Some portions of the camera heat up during use, so please take care, as there is a risk of low temperature burns if such portions are held for long periods of time. • Do not place your finger on the flash when it is discharging as there is
Summary of the content on the page No. 18
Getting Started Installing the SD Memory Card / MultiMediaCard Battery / card cover SD Memory Card / 1 MultiMediaCard MultiMediaCards and the SD Memory Card can be used with this camera. Captured images or recorded voice are recorded on the SD Memory Card / MultiMediaCard. Make sure that the camera is turned off before inserting or removing the SD Memory Card / MultiMediaCard. 1 Open the battery / card cover. Follow the steps described on p.15 to open the cover. 2 Rotate the card with the su
Summary of the content on the page No. 19
Getting Started Precautions When Using a SD Memory Card / MultiMediaCard • Make sure that the camera is turned off before opening the battery / card cover. • The SD Memory Card is equipped with a write-protect Write-protect switch 1 switch. Setting the switch to [LOCK] protects the existing data by prohibiting recording of new data, deletion of existing data or formatting of the card. • The SD Memory Card / MultiMediaCard formatted by the other equipment than this camera cannot be used for
Summary of the content on the page No. 20
Getting Started Turning the Camera On and Off 1 Power switch Playback button 1 Press the power switch. The camera will turn on. When the camera is turned on, the lens cover opens and the lens extends. Press the power switch again to turn the camera off. Card Check It automatically performs a card check when the 000 0 000 00 camera is turned on. h appears on the LCD monitor if no SD Memory Card / MultiMediaCard has been inserted. And when the write-protect switch is set to 10/20/2003 1 10/20
