Minolta Vectis GX-4 user manual

Summary of the content on the page No. 1

Minolta Co., Ltd. 3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541, Japan
Minolta GmbH Kurt-Fischer-Strasse 50, D-22923 Ahrensburg, Germany
Minolta France S.A. 365 Route de Saint-Germain, F-78420 Carrieres-Sur-Seine, France
Minolta (UK) Limited Rooksley Park, Precedent Drive, Rooksley, Milton Keynes, MK13 8HF, England
Minolta Austria Ges. m.b.H. Amalienstrasse 59-61, A-1131 Wien, Austria
Minolta Camera Benelux B.V. Zonnebaan 39, P.O. Box 6000, NL-3600 HA Maarssen, The Netherlands
Belgium Branch K

Summary of the content on the page No. 2

The Minolta GX-4 is a waterproof Advanced Photo System™ camera designed to New print formats... take pictures anywhere you go. Its housing is sealed to prevent entry of moisture Classic C print, wider H print, and panorama P print formats are available with Advanced Photo System cameras. and dust, so you can enjoy taking pictures on the ski slope, at the beach, or even underwater (approx. 5 m (16 ft.)). Before using your camera, familiarize yourself with the names and locations of the controls,

Summary of the content on the page No. 3

LOADING FILM Use ISO 200 IX240 (Advanced Photo System) film in this camera. 2. Open the film-chamber door and insert a • Your camera’s transport system loads the film and advances the film after each exposure. • Do not open the film chamber unless appears or all of the indicators blink in the data new film cassette into the film chamber. panel. • If the film-chamber door will not open, internal pressure • Install the battery before loading the film, or the film will not advance to the first fram

Summary of the content on the page No. 4

SELF-TIMER The self-timer delays release of the shutter for approximately ten seconds. • When the self-timer is selected, the flash will fire every time a picture is taken. 2. Set the command switch to . • The print format is set to H when the self-timer is selected. • will appear in the data panel. 1. Mount the camera on the handy tripod (not included) and place on a level surface. 3. Frame your subject(s) inside the H print image frame. 4. Press the shutter-release button all the way down to t