Our goal is to provide you with a quick access to the content of the user manual for Konica Minolta Q-M100. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Konica Minolta Q-M100.
For your convenience
If looking through the Konica Minolta Q-M100 user manual directly on this website is not convenient for you, there are two possible solutions:
Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Konica Minolta Q-M100 on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual Konica Minolta Q-M100 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Konica Minolta Q-M100 but the selected pages only. paper.
Summaries
Below you will find previews of the content of the user manuals presented on the following pages to Konica Minolta Q-M100. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Abstracts of contents
Summary of the content on the page No. 1
Summary of the content on the page No. 2
Names of main parts/Camera body ① ① Flash mode switch ⑨ ② Self-timer/Close-up mode switch ② ⑩ ③ Image quality mode switch ③ ④ Data display panel (LCD) ④ ⑤ Shutter release button ⑥ Viewfinder ⑤ ⑪ ⑦ Grip rubber ⑧ Objective lens/Lens barrier* ⑨ Self-timer indicator ⑩ Flash adjustment sensor ⑥ ⑪ Flash tube ⑫ ⑫ Video port cover/Video port (inside cover) ⑦ ⑬ Power input terminal ⑬ ⑭ Serial port ⑮ I/O terminal cover ⑭ ⑯ Lens barrier switch ⑧ ⑮ ⑯
Summary of the content on the page No. 3
⑰ ⑰ Viewfinder 昂 ⑱ MENU button 晃 ⑲ SET button ⑳ SELECT buttons 更 控 LCD monitor 攻 Battery cover 昂 Green lamp ⑱ 杭 晃 Monitor power switch ⑲ 更 Card access warning lamp 校 杭 Red lamp ⑳ 校 CF card cover/CF card ejector button (inside cover) 梗 Card cover release button 梗 構 Strap eyelet 江 Tripod socket hole 控 構 * The lens barrier that shuts and opens by operation of the lens barrier switch protects the objective lens. 攻 江 Don't directly touch both the lens barrier and obje
Summary of the content on the page No. 4
* In the following picture, all indicators of the data display panel ① ② ③ ④ ⑤ are on for explanation. ① Battery's remaining energy indicator Remaining energy of the battery is indicated in three steps of [ ] (full), [ ] (half) and [ ] (depleted). ⑨ ⑥ ② Card NG indicator This indicator goes on when the inserted CF card is unusable. ⑧ For example, when a CF card which is unformatted, uncon- formable to this camera, has broken data and so on is inserted, this indicator goes on.
Summary of the content on the page No. 5
⑤ Flash mode indicator ⑧ Sandglass mark Each time the flash mode switch is pressed, indication of this This sandglass mark blinks in a camera operation that it takes indicator circularly changes from 1) automatic flash (AUTO), to a considerably long time to finish, for example, picture data 2) automatic flash with red-eye reduction, to 3) forced flash writing on a CF card or picture data transfer to a personal com- (ON), to 4) forced flash with red-eye reduction, to 5) non-flash puter,
Summary of the content on the page No. 6
Name of main parts/LCD monitor 1.Ⓐ Ⓒ ● The LCD monitor is used for many purposes such as to show playback pictures, to preview pictures and to show menus for selecting various functions. For details of each function or operation, read explanations on and after the next page. 1. Functions that can be selected by pressing the MENU button in the preview mode are shown below. Ⓑ Ⓓ Ⓐ Exposure compensation Ⓑ LCD monitor's brightness adjustment Ⓒ 4-frame continuous shooting. Ⓓ Digital
Summary of the content on the page No. 7
2.ⓐ ⓓ 2. Functions that can be selected by pressing the MENU button in the playback mode are shown below. (Number appearing in the lower right part of each menu shows the menu number.) (Each time the SELECT button (“ ” or “ ”) is pressed, the following menus are circularly shown by turn.) ⓐ Setting of frame protection ⓑ Erase ⓑ ⓔ ⓒ Index playback ⓓ Adjustment of LCD monitor's brightness ⓔ Slide show playback ⓕ Formatting of CF card ⓖ Setting of calendar and clock ⓗ Switching
Summary of the content on the page No. 8
ⓘ ⓖ ⓗ (1) MENU button To access menus on the LCD monitor. (4) (1) (2) SET button To execute a selected function. (2) (3) SELECT buttons To select a function from a menu. (3) (4) Monitor power switch To turn on/off the LCD monitor.
Summary of the content on the page No. 9
Setting batteries in camera 1. First of all, close the lens barrier without fail. (Slide the lens barrier switch upwards.) 2. Make sure that the LCD monitor on the back of the camera is off.
Summary of the content on the page No. 10
3. Slide the battery cover on the bottom of the camera in the direction of the arrow to open it. Warning: Don’t touch the battery cover with wet hand, otherwise you may get an electric shock. 4. Set AA-size batteries (four) in the battery chamber paying careful attention to their respective orientations referring to + and - indications inside the battery chamber. Caution: If some battery is set in wrong orientation, it may cause not only damage to or soil of the camera but also
Summary of the content on the page No. 11
5. After confirming that all batteries are set right, firmly close the battery cover by sliding it in the direction of the arrow until it clicks. * When the battery's remaining energy indicator indicates the half level, the batteries need replacement. When replacing the battery, prepare four new batteries of the same type to replace all at the same time. When going out with the camera, it is recommended to have four new batteries always ready.
Summary of the content on the page No. 12
Use of AC adaptor (optional accessory) for Q-M100 * If you use an optional AC adaptor for Q-M100 to supply power to the camera, you can transfer picture data to a personal computer without worry about remaining energy of batteries. ● Correctly connect an AC adaptor (optional) for Q-M100 to the camera and a mains AC outlet referring to “Safety precautions” of this book and the precautions of the AC adaptor. ● Be sure to use an optional specified AC adaptor, because use of another AC
Summary of the content on the page No. 13
2. Make sure that the LCD monitor on the back of the camera is off. 3. Open the I/O cover.
Summary of the content on the page No. 14
4. Plug the cord connector of the AC adaptor into the power input terminal of the camera. Next, plug the AC adaptor in to a mains outlet (Input 100V ∼ 240V, 50/60Hz AC). ① CLOSE ② OPEN ③ LCD monitor
Summary of the content on the page No. 15
Setting CF card in camera ● First of all, make sure that the lens barrier is closed, the LCD monitor is off and all the power switches are off. If the camera is turned on in whole or in part, it may cause damage to the camera and a CF card set in the camera. 1. Press down the CF card cover release button to unlock the CF card cover, and then open the CF card cover. ○ Don't open the CF card cover by force, otherwise the pivot of the cover may be damaged.
Summary of the content on the page No. 16
2. Paying heed to the orientation of a CF card, insert it straight into the deepest end. (2B) ○ Be sure to insert a CF card correctly referring to the figure 2A for orientation of the CF card. If a CF card is inserted in wrong orientation, the connector may be damaged. (2A) (2B) 3. Bend the card ejector button so that it will be covered by the CF card cover. * If the card ejector button is not bent, the CF card cover cannot be closed.
Summary of the content on the page No. 17
4. Close the CF card cover. Caution: ○ If the CF card cover is opened during playback of picture, the camera is compulsorily turned off. Before inserting or setting a CF card, be sure to turn off the camera. Don’t open the CF card cover while the card access warning lamp is on in the shooting mode, otherwise operation of picture data writing on a CF card is interrupted.
Summary of the content on the page No. 18
Removing CF card from camera ● First of all, make sure that the lens barrier is closed, the LCD monitor is off and all the power switches are off. If the camera is turned on in whole or in part, it may cause damage to the camera and a CF card set in the camera. 1. Press down the CF card cover release button to unlock the CF card cover, and then open the CF card cover. ○ Don’t open the CF card cover by force, otherwise the pivot of the cover may be damaged.
Summary of the content on the page No. 19
2. Raise the CF card ejector button. 3. Press the CF card ejector button to stick out the CF card, then pick it out of the camera. * If the CF card cannot be stuck out by pressing the CF card ejector button, again push the CF card into the deepest end and press the CF card ejector button strongly once more. * If the CF card ejector button is pressed with the card slot down, the CF card may fall down. Avoid pressing the CF card ejector button with the card slot down.
Summary of the content on the page No. 20
4. Shut the CF card cover. Caution: ○ If the CF card cover is opened during playback of picture, the camera is compulsorily turned off. Before inserting or setting a CF card, be sure to turn off the camera. Don’t open the CF card cover while the card access warning lamp is on in the shooting mode, otherwise operation of picture data writing on a CF card is interrupted.
