Summary of the content on the page No. 1
NNN E COVER 02.5.11 11:12 AM Page 3
/
/
E
INSTRUCTIONS
English
Summary of the content on the page No. 2
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 2 Thank you for purchasing a Canon product. The EOS REBEL Ti (DATE) / 300V (DATE) is a very compact autofocus, single-lens reflex camera. It can be used for a wide variety of subjects and situations with fully automatic and user-controlled shooting modes. Read this Instructions and familiarize yourself with your new camera before taking pictures. Also read “Handling Cautions” on page 4 to prevent camera malfunction and damage. Keep this instruction bookl
Summary of the content on the page No. 3
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 3 Contents Conventions Used in this Instructions ............................................2 Handling Cautions..........................................................................4 Quick Start Guide...........................................................................6 Nomenclature.................................................................................8 Before You Start ..............................................................
Summary of the content on the page No. 4
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 4 Handling Cautions Camera Care and Storage (1) The camera is a precision instrument. Do not drop it or subject it to physical shock. (2) This camera is not waterproof and cannot be used underwater. If the camera gets really wet, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe with a well-wrung damp cloth. (3) Do not leave the camera in places prone to e
Summary of the content on the page No. 5
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 5 LCD Displays In time, the camera’s LCD panel display and the LCD display in the viewfinder may fade and become difficult to read. If this happens, have it replaced (at cost) by a Canon Service Center. At low temperatures, the LCD display response may become slower. And at 60˚C/140˚F or higher temperatures, the display may blacken. In either case, the display will return to normal at room temperature. Lithium Batteries (1) The camera operates on two CR2
Summary of the content on the page No. 6
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 6 Quick Start Guide Install the batteries. Attach a lens. Insert two CR2 lithium bat- Align the red dots on the 1 2 teries as shown by the bat- lens and camera and turn tery orientation diagram on the lens as shown by the the battery compartment arrow until it snaps into cover. (→page 14) place. (→page 16) Load the film. Focus the subject. Align the edge of the film Aim the AF point on the 5 6 with the < > mark, and subject and press the shut- close the
Summary of the content on the page No. 7
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 7 On the lens, set the Turn the Command Dial focus mode switch to to < > (Full Auto). 3 4 (→page 22) . (→page 16) Take the picture. Unload the film. Press the shutter button At the end of the roll, the 8 7 fully to take the picture. film rewinds automatically. (→page 17) Open the back cover to remove the film cartridge. (→page 19) 7
Summary of the content on the page No. 8
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 8 Nomenclature • The reference page is indicated in parentheses. • The camera controls are indicated as icons in brackets < >. Built-in flash (→page 49) Command Dial AF-assist beam (→page 23) (→page 12) < >Film plane mark Red-eye reduction lamp (→page 26) Hot shoe < > Main Dial (→page 2) Flash-sync contact Shutter button < > Flash button (→page 17) (→page 49) *Remote control < > / sensor Film advance mode/ (→page 28) S
Summary of the content on the page No. 9
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 9 < > Exposure Viewfinder eyepiece compensation (→page 45) Manual aperture setting (→page 42) Eyecup (→page 28) *SET button (→page 30) < > AE lock Film check window (→page 44) / FE lock button < > AF point Back cover selection button release lever (→page 32) (→page 18) Back cover <> Function LCD panel button (→page 10) (→page 19, 26, 29, 46, 48, 50, 51) Guide hole Tripod socket Battery < > Midroll rewind button compartment cover (→page 2
Summary of the content on the page No. 10
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 10 Nomenclature LCD Panel < > Manual focus Shutter speed (- , ) FE lock ( ) Aperture ( - ) ISO film speed ( - ) Red-ey reduction Date setting ( , ) Beeper setting ( , ) DATE Model AEB amount ( - ) Date Shooting mode < > Date <> ISO film speed <> Red-eye reduction AF point mark < > Beeper <> Multiple exposures < > AEB Film advance mode < > Single frame < > Function pointer < > Continuous shooting < > Self-timer/ Frame counter ( - ) R
Summary of the content on the page No. 11
NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 11 Viewfinder Information AF points (7) New Lasermatte focusing screen Superimposed display position <> Focus confirmation light < > AE lock / FE lock AEB in progress Exposure level < > Flash-ready Exposure compensation amount Improper FE lock warning AEB level < > High-speed sync Film transport indicator Red-eye reduction lamp-on indicator (FP flash) Shutter speed ( - , ) FE lock ( ) Aperture ( - ) • The LCD panel is shown with all the information dis
Summary of the content on the page No. 12
B I a m s NNN E SEC0 (2-12) 02.5.11 11:13 AM Page 12 Nomenclature Command Dial The dial is divided into three zones. OFF (Camera is inoperative) Full Auto 1 Basic Zone 2 Creative Zone Fully automatic mode where the Semi-automatic and manual camera takes care of everything. modes enable you to take control of the camera to obtain the : Full Auto (→page 22) desired result. Basically, all you do is point and : Program AE (→page 36) shoot. : Shutter-priority AE (→page 38) Image Zone (→page 24) F
Summary of the content on the page No. 13
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 13 Before You Start Installing the Batteries and 1 Checking the Battery Level ..............................14 Mounting and Detaching a Lens ............................16 How the Shutter Button Works...............................17 Loading and Unloading Film..............................18 Midroll Rewind ..........................................20 Holding the Camera ...............................................20 Attaching the Strap Pass the end o
Summary of the content on the page No. 14
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 14 Installing the Batteries and Checking the Battery Level Installing the Batteries The camera uses two CR2 lithium batteries. Open the battery compartment 2 1 cover. Slide the cover release lever as • shown by the arrow and open the battery compartment cover. 1 Instal the batteries. 2 Make sure the battery contacts (+ • and –) are properly oriented as shown. Do not mix old and new batteries. • Close the battery compartment 3 cover. Press the cover unti
Summary of the content on the page No. 15
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 15 Checking the Battery Level Check the battery level after replacing the batteries and before using the camera. Turn the Command Dial to a shooting mode. The camera will then turn on and the • LCD panel will display one of the following battery level icons: : Battery level OK. : The battery level is low. Keep spare batteries handy. : The batteries will soon be completely exhausted. : Replace the batteries. (→page 5) Battery Life (With 24-ex. rolls) Tem
Summary of the content on the page No. 16
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 16 Mounting and Detaching a Lens Mounting a Lens Remove the caps. 1 Remove the rear lens cap and the • camera body cap. Mount the lens. 2 Align the red dots on the lens and • camera and turn the lens as shown by the arrow until it snaps in place. Red dots On the lens, set the focus mode 3 switch to . If the focus mode switch is set to • (or on older lenses), autofocus will not operate and < > 1 will be displayed on the LCD panel. 1 2 Remove
Summary of the content on the page No. 17
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 17 How the Shutter Button Works The EOS camera’s shutter button can be depressed halfway or all the way. There is a click stop at the halfway point. Pressing the Shutter Button Halfway or Fully The shutter button works as described below. When it is pressed halfway: Autofocusing (AF) is activated. When • the subject is in focus, the AF point which achieved focus will flash, the beeper will sound, and the focus confirmation light will light up. Also, th
Summary of the content on the page No. 18
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 18 Loading and Unloading Film Loading Film After you load the film, the camera first winds the entire roll onto the camera’s take-up spool. With DX-coded film, the camera automatically sets the film’s ISO speed. Then each time a picture is taken, one frame of film is rewound back into the film cartridge. The frame counter shows always number of shots remaining. Turn the Command Dial to any 1 setting except < >. Open the back cover. 2 Slide the back cove
Summary of the content on the page No. 19
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 19 • The shutter curtains have been manufactured with very high precision. Never touch them with your fingers. When loading film, do not touch or dam- age the curtains with your fingers or film. • In hot and humid environments, do not remove the film packaging until you are ready to load the film. • If the film is not loaded properly, the < > icon will blink on the LCD panel and the shutter will not work. Reload the film cartridge properly. (→page 18) •
Summary of the content on the page No. 20
NNN E SEC1 (13-20) 02.5.11 10:46 AM Page 20 Loading and Unloading Film Midroll Rewind To rewind the film in midroll, follow the procedure below. Press the < > button. 1 Film rewind will begin. Take out the film cartridge. 2 Make sure the <> icon is blinking • on the LCD panel before taking out the film cartridge. If you take out the film cartridge in midroll without rewinding the film and then load a new roll of film and press the shutter button completely, the new film will only rewind into
