Summary of the content on the page No. 1
24/7 Sharp Eye
High Resolution Day & Night Camera SDN-550 User’s Manual
SALES NETWORK
• •
SAMSUNG TECHWIN CO., LTD. TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
Thank you for purchasing a SAMSUNG CCD CAMERA.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, 7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
Before attempting to connect or operate this product,
Gyeonggi-do 462-703, Korea TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
TEL : +82-31-740-8137~8139 FAX : +82-31-740-81
Summary of the content on the page No. 2
Before operating the camera, confirm the camera model and proper input Samsung Techwin cares for the environment at all product manufacturing power voltage. In order to that you can understand this manual thoroughly, stages to preserve the environment, and is taking a number of steps to we'll introduce our model description. provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin s will to create environment-friendly products, and indicates that the prod
Summary of the content on the page No. 3
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Contents 21 6 Operating Your Camera Features Menu 21 7 Warnings and precautions Settings 22 • LENS (selection) 24 10 Components and Accessories • SHUTTER (condition and speed control) 25 • WHITE BALANCE control 26 Overview 11 • BACKLIGHT (Backlight Compensation) 27 Front 11 Side 12 • AGC(Auto Gain Control) 28 Bottom 13 • SSNR (Samsung Super Noise Reduction) 29 Back 14 • SENS-UP 30 • SPECIAL 31 15 Installation • EXIT 32 Lens 15 15 Connection Connecting to a monitor 38 18 Trou
Summary of the content on the page No. 4
Features Warning The camera needs periodic maintenance. Horizontal Resolution 530 TV Lines High Sensitivity Contact an authorized technician for maintenance. Featuring 530TV line horizontal resolution The built-in high sensitivity COLOR CCD in color mode and 570TV line horizontal enables a clear image even in 0.002Lux(Sens- resolution in BW mode.The camera features up) or lower illumination. Stop using your camera when you find a malfunction. Sony’s 410,000 pixel CCD and capture clean, SSNR (Sam
Summary of the content on the page No. 5
Precautions Do not install under extreme Do not install in high humidity Do not drop the camera or Never keep the camera face to temperature conditions. environment. subject it to physical shock. strong light directly. Use only under temperature conditions May lower image quality. May cause a product malfunction. May damage the CCD. between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not expose the camera to Do not expose the camera to rain or other ty
Summary of the content on the page No. 6
Overview Components and Accessories FRONT 1. HIGH RESOLUTION DAY & NIGHT COLOR CAMERA 2. Auto iris lens connection plug 3. C-Mount adaptor CCD protection cap Please cover the CCD SENSOR when not using it. C-Mount lens adaptor Please attach the C-Mount lens here. CS-Mount lens adaptor Please remove the C-MOUNT lens adaptor and then attach it. 4. Instruction manual Back Focus adjustment lever Please used to adjust back focal length COLOR CCD CAMERA 10 User’s Manual COLOR CCD CAMERA 11 User’s Man
Summary of the content on the page No. 7
Overview BOTTOM SIDE DAY & NIGHT Mounting bracket screw hole L Please use the screw hole when fixing the camera onto the mounting bracket. Please 1/4"-20 UNC (20 THREAD) use the clamp screw as specified below. L:4.5mm±0.2mm (ISO *The mounting bracket can be separated standard), Auto iris lens connector and attached to the top of the camera. This is the connection terminal for the auto iris lens. In this instance please do not tighten the screw to a depth of more than 4mm, otherwise serious dam
Summary of the content on the page No. 8
Overview Installation Lens BACK Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and C-Mount lens can be used. Note • Please keep the lens clean. • Any foreign objects and fingermarks on the lens can cause inferior image quality in low light level conditions. When using an auto iris lens *High Voltage Type (SDN-550PH) 1. Please peel off about 8mm of the outer skin of the auto iris lens cable. Auto iris lens selection switch Please change the mode to DC or VIDEO depend
Summary of the content on the page No. 9
Installation 3. Please remove the cover of the auto iris lens connection plug and solder the When using a C-Mount lens lens cable to the connector pin in the plug. Please take off the CCD protection cap and attach the LENS Pin No. C-Mount lens to the camera by screwing DC VEDIO it in clockwise. No.1 Pin Damping- Red (power) C-mount adaptor No.2 Pin Damping+ NC No.3 Pin Drive+ White (video signal) No.4 Pin Drive- Black (GND) When using a CS-Mount lens Lens cable 1. Please take off the CCD prote
Summary of the content on the page No. 10
Connection Connecting to Monitor Connecting to Power Please connect the video output terminal located on the back of the camera to Each model has a different power input specification. the monitor. Please check the model type and standard power requirement before connecting to power. AC/DC Power Type The recommended adaptor specification for SDN-550N/SDN-550P is AC 24V/500mA or DC 12V/500mA. CCD Camera Monitor • The connection method varies depending on the type of monitor and accessories. Ple
Summary of the content on the page No. 11
Connection Operating Your Camera Connection to External Control Connector Menu SETUP menu LENS (selection) • MANUAL • DC / VIDEO SHUTTER • ESC • MANUAL • FLK (condition and speed control) WHITE BALANCE control • ATW • AWC • MANUAL BACKLIGHT • OFF • LOW • MIDDLE MD(Motion Detection) output signal level(less than 10mA) (Backlight compensation) • HIGH • SPOTLIGHT +3V AGC (Auto Gain control) • OFF • NORMAL • HIGH There is motion SSNR • OFF • LOW • MIDDLE (Samsung super noise reduction) • HIGH 0V T
Summary of the content on the page No. 12
Operating Your Camera Settings SETUP Select any function you 1.LENS DC Modes can be Settings can be made using the 5 buttons located on the back of the camera. 2.SHUTTER --- changed using the wish to operate by 3.WHITE BAL. ATW LEFT and RIGHT using the UP and 4.BACKLIGHT OFF DOWN buttons. buttons. 5.AGC NORMAL 6.SSNR LOW SETUP button 7.SENS-UP OFF 8.SPECIAL UP button 9.EXIT RIGHT button LEFT button 3. Please press the LEFT or RIGHT button if you wish to change mode. DOWN button • When the LEFT o
Summary of the content on the page No. 13
Operating Your Camera LENS (selection) SHUTTER (condition and speed control) Auto or manual control can be selected. This function is used to adjust the brightness of the screen. 1. When the SETUP menu is displayed on the screen, please position the arrow 1. When the SETUP menu is on the screen, please position the arrow to point to 'SHUTTER' by using the DOWN button. to point to 'LENS' by using the UP and DOWN buttons. 2. Please select the type of the lens you wish to use by pressing the LEFT
Summary of the content on the page No. 14
Operating Your Camera BACKLIGHT (Backlight Compensation) WHITE BALANCE control When there is a strong backlight behind the object, clear images of the background The screen color can be adjusted by using the WHITE BALANCE function. as well as the object can still be obtained by using the BACKLIGHT function. 1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP and DOWN buttons. using the UP
Summary of the content on the page No. 15
Operating Your Camera HIGH/MIDDLE/LOW : You can adjust the sensitivity of Backlight Compensation. 3. Please press the SETUP button. The BRIGHTNESS can be adjusted within the range OFF BACKLIGHT function does not operate. of 1~70. 4. Please press the SETUP button when all the settings are complete. SSNR (Samsung Super Noise reduction) BACKLIGHT ON BACKLIGHT OFF The background noise in the low light level decreases automatically as the level of gain changes. 1. Please position the arrow to point
Summary of the content on the page No. 16
Operating Your Camera SENS UP (Low illuminance) SPECIAL 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using SENS UP helps maintain a bright, clear screen image by automatically detecting the UP and DOWN buttons. changes in the level of light in low light level conditions. 2. Please select the mode you wish to operate by pressing the UP or DOWN button. 1. Please position the arrow to point to 'SENS UP' on the SETUP menu by using the UP and DOWN buttons. SPECIAL 2. Please
Summary of the content on the page No. 17
Operating Your Camera 3) Please press the SETUP button. 5) When a name has been chosen, please select a position for the name display. Please move the cursor onto 'POS' and then press the SETUP button. 4) Up to 15 letters can be used for the ID. Please move the cursor to the letter you wish to choose by using the UP and The name will appear at the top left hand corner. DOWN button. FRONT DOOR to Locate, then SET to Locate, then SET to Locate, then SET Please find the position you wish to dis
Summary of the content on the page No. 18
Operating Your Camera DAY&NIGHT (ICR TYPE) : Select from COLOR, BW, AUTO or EXT modes. - INT : Internal synchronization - LL : External line-lock synchronization •AUTO: According to the input luminance level, IR Cut Filter is automatically • If you choose ‘LL’, you can adjust the desired phase. Press the SET button. switched to the appropriate mode for • You can adjust the desired phase from 0 to 359. daytime or night-time. The COLOR mode is operated for daytime, and it converts to BW Not
Summary of the content on the page No. 19
Operating Your Camera PRIVACY : Mask privacy area you do not wish to appear on the screen. RESET : Returns to the level which was set by the manufacturer for shipment. - OFF : Cancels the PRIVACY mode. - ON : Operates the PRIVACY mode. RETURN : Returns to the SETUP menu. • Please press the SETUP button. • Please select the area you do not wish to appear EXIT from the 4 areas in AREA SEL mode. • Please select ON mode for the chosen area. Saves all the setting menus and then exits. • Please adj
Summary of the content on the page No. 20
Troubleshooting If there are problems in operation, please refer to the items below. If the Problem Solution problem persists, please contact the agent you purchased this product from. The MOTION • Please check if 'MOTION DETECTION' mode is DETECTION function turned on. Problem Solution is not working. • Please check if the MD LEVEL is too low. Nothing appears on • Please check the power connection. • Please check the setting of the MD AREA. the screen. • Please check the video signal
