Summary of the content on the page No. 1
220x Power Zoom
LOW LIGHT
DIGITAL COLOR CAMERA
220X POWER ZOOM CAMERA
SCC-C4201(P), C4203(P),
C4301(P), C4303(P)
E
Owner’s Instructions
D
Gebrauchsanleitung
F
Guide d’utilisation
Es
Guía del usuario
I
Istruzioni per l’uso
Part : AB68-00366A
Printed in Korea
✽ Be sure to read the "Safety Precautions" in this manual
to ensure correct use and operation of this product.
Summary of the content on the page No. 2
Safety Precautions The purpose of safety precautions is to prevent 4. Securely plug the power cord into the power accidental injury or property damage. Always observe receptacle. (A loose connection may result in fire.) all safety precautions. ✽ The precautions are divided into "Warnings" and 5. When mounting the camera on a wall or ceiling, "Cautions" as distinguished below: fasten it safely and securely. (A falling camera may E cause personal injury.) 6. Do not place conductive objects (e.g.,
Summary of the content on the page No. 3
Contents Cautions 1. Overview.............................................................5 1. Do not drop objects on the product or apply strong 2. Part Names and Functions ...............................6 shock to it. Keep away from a location subject to 3. Installation........................................................ 8 excessive vibration or magnetic interference. Checking the Package Contents ....................... 8 2. Do not install in a location subject to high E Preparing the C
Summary of the content on the page No. 4
Overview Part Names and Functions 1 2 This camera is a high performance surveillance camera that provides a maximum of 220x zoom surveillance capability with its 22x optical zoom lens and digital zoom IC. It is a multifunction camera that is equipped with all of the key features of the existing surveillance cameras : Day & Night function (SCC-C4203(P), C4303(P)) that E 220x Power Zoom ensures sharp and clear images even at night. LOW LIGHT DIGITAL COLOR CAMERA Low - Light Surveillance func
Summary of the content on the page No. 5
220x Power Zoom LOW LIGHT DIGITAL COLOR CAMERA In Setup Menu Mode Installation 3 - UP/ DOWN buttons: Use to move the cursor up or down. - LEFT/ RIGHT buttons: Use to move the cursor left or Before Installation right, or to sequentially view the values that can be assigned to a parameter. - ENTER button: Use to select a Sub Menu item, and to accept the current value. Checking the Package Contents Make sure that the following accessories are included in ZOOM/ FOCUS REMOTE terminals E the package
Summary of the content on the page No. 6
Preparing the Cables Connecting the Cables To install and use the camera, first prepare the following 1. Connect one end of the BNC cable to the VIDEO OUT. cables. 2. Connect the other end of the BNC cable to the VIDEO IN The requirements for the power adapter, which connects to of the monitor. the camera's POWER IN terminal, are as follows: SCC-C4201(P), SCC-C4203(P) : DC12V 600mA SCC-C4301(P), SCC-C4303(P) : AC24V 300mA E DC12V 600mA Video terminals on the back of the monitor BNC cable REM
Summary of the content on the page No. 7
Navigating the Setup Menu 4 4. Determine the type of power supply and set the POWER In this chapter, we will take a look at the menu system of the SELECTION switch accordingly. Next, plug the power SCC-C4201(P), C4203(P), C4301(P), and C4303(P). First, adapter into a wall outlet. we will take a look at the structure of the Setup Menu and then describe the functions of each menu item in the menu. The requirements for the power adapter for each model are as follows: Structure of the Setup Menu S
Summary of the content on the page No. 8
Structure of the Setup Menu Structure of the Setup Menu of the SCC-C4301(P) Structure of the Setup Menu of the SCC-C4203(P) CAMERA ID OFF/ON... CAMERA ID OFF/ON... IRIS ALC.../MANU... IRIS ALC.../MANU... OFF/1/100(1/120) ~ 1/10K OFF/1/100(1/120) ~ 1/10K SHUTTER SHUTTER E /AUTO X2~X128/FIX X2~X128 /AUTO X2~X128/FIX X2~X128 AGC OFF/LOW/HIGH AGC OFF/LOW/HIGH MOTION S.S/SLOW/NORMAL/FAST/F.F MOTION S.S/SLOW/NORMAL/FAST/F.F WHITE BAL ATW/AWC/MANU... WHITE BAL ATW/AWC/MANU... SPECIAL ... SPECIA
Summary of the content on the page No. 9
(SET UP) (SET UP) Structure of the Setup Menu CAMERA ID OFF CAMERA ID OFF IRIS ALC... IRIS ALC... SHUTTER OFF SHUTTER OFF AGC LOW AGC LOW Structure of the Setup Menu of the SCC-C4303(P) WHITE BAL ATW WHITE BAL ATW SPECIAL ... SPECIAL ... AUTO FOCUS ONEAF AUTO FOCUS ONEAF MOTION DET OFF MOTION DET OFF CAMERA ID OFF/ON... PRESET ... PRESET ... COLOR/BW COLOR EXIT QUIT EXIT QUIT IRIS ALC.../MANU... OFF/1/100(1/120) ~ 1/10K [SCC-C4201(P),SCC-C4301(P)] [SCC-C4203(P),SC
Summary of the content on the page No. 10
If you set the AREA option to USER and press the ENTER IRIS button, you can customize the area to which the BLC function The level of video output to the monitor can be controlled by will be applied. You can specify the size of the area by using the iris lens according to the intensity of the incoming light. the UP, DOWN, LEFT, and RIGHT buttons. After setting the This product is equipped with an iris lens. In the ALC (Auto size of the area, press the ENTER button. The specified area Light Com
Summary of the content on the page No. 11
SHUTTER AGC (MOTION) In the AGC (Automatic Gain Control) option, you can specify In the SHUTTER option, you can specify the speeds of the whether to automatically control the GAIN when the obtained high-speed electronic shutter, auto low-speed shutter, and fix video is below a certain level of brightness because it was low-speed shutter. The high - speed electronic shutter recorded under insufficient lighting. To automatically control supports 7 shutter speeds from 1/100 seconds to 1/10K the GAI
Summary of the content on the page No. 12
WHITE BAL SPECIAL You can manually adjust the LANGUAGE, V-SYNC, CTRL TYPE, In the WHITE BAL option, you can set the White Balance RS485, PIP, MIRROR, D-ZOOM, POSI/ NEGA, ZOOM SPEED, function, which enables you to see the white color correctly and DETAIL. under illumination of any color temperature. If you set the WHITE BAL option to ATW, the camera will continuously The V-SYNC option is available only with the SCC-C4301(P) monitor changes in the ambient color temperature and and C4303(P). autom
Summary of the content on the page No. 13
CTRL TYPE : You can select the A, B, C, or D mode AUTO FOCUS depending on the input of the wired remote control terminal. In the AUTO FOCUS option, you can specify the Focus (See page 7.) method to AF, MF, or ONEAF. RS-485 : It sets up ADDRESS, PROTOCOL, and BAUD RATE of RS-485 communication. AF : Focuses automatically by continuously monitoring the (BAUD RATE: 2400bps, 4800bps, 9600bps, 19200bps, 38400bps) screen in AUTO FOCUS mode. It does not process the FOCUS button input because it
Summary of the content on the page No. 14
If you select ON and press the ENTER button, the MOTION (PRESET MAP) PRESET NO. 0 DET screen will come up. You can set the AREA to which the 0 H 1 2 3 4 Motion Detection function will be applied to either PRESET or 56 7 8 9 POSITION SET ... 10 11 12 13 14 USER. If you set the AREA option to PRESET, the Motion PRESET ID ON... 15 16 17 18 19 Detection function will be applied to the areas preset as factory 20 21 22 23 24 Press the 25 26 27 28 29 defaults. If you set the AREA option to USER and
Summary of the content on the page No. 15
In low light conditions, the IR Filter is turned OFF and the EXIT sensitivity to low light is increased by switching to the BW The EXIT option is used to quit the Setup Menu mode and mode, but in bright light conditions, the IR Filter is turned return to the Normal Operation mode. ON and the sensitivity is decreased by switching to the COLOR mode. If you select AUTO and press the ENTER QUIT : Select to ignore any changes you have made and button, a screen from which you can set the ALARM resto
Summary of the content on the page No. 16
Specifications 5 SCC-C4201/C4203 SCC-C4201P/C4203P Item Description Remark Item Description Remark Product Type - 22x Zoom Camera Product Type - 22x Zoom Camera Power Supply Voltage - DC 12V ± 10% Power Supply Voltage - DC 12V ± 10% Power Consumption - 5.0 W Power Consumption - 5.0 W Broadcast System - NTSC Standard Color System Broadcast System - PAL Standard Color System E Imaging Device - 1/4 inch IT CCD Imaging Device - 1/4 inch IT CCD Effective Pixe - 768(H) x 494 (V) Effective Pixe - 752
Summary of the content on the page No. 17
Specifications SCC-C4301/C4303 SCC-C4301P/C4303P Item Description Remark Item Description Remark Product Type - 22x Zoom Camera Product Type - 22x Zoom Camera Power Supply Voltage - AC 24V (60Hz) or DC 12V ± 10% Power Supply Voltage - AC 24V (50Hz) or DC 12V ± 10% Power Consumption - 5.5W Power Consumption - 5.5W Broadcast System - NTSC Standard Color System Broadcast System - PAL Standard Color System E Imaging Device - 1/4 inch IT CCD Imaging Device - 1/4 inch IT CCD Effective Pixe - 768(H) X
Summary of the content on the page No. 18
Others 6 ZOOM/FOCUS Remote Terminals 1 : With the menu "off", if voltage is applied for shorter than 2 These terminals are to activate the ZOOM/FOCUS, seconds, the AF function will be activated, and if voltage is MENU CONTROL, HOME RETURN, and AF functions applied for longer than 2 seconds, the menu will be "on". by using an external controller. They could be set to one With the menu "on", if voltage is applied, the ENTER of four modes depending on the input condition: A, B, C, function will be
Summary of the content on the page No. 19
Memo Memo
