Summary of the content on the page No. 1
Summary of the content on the page No. 2
Instructions Getting to Know your camera Thank you for buying a Samsung Digital Camera. Use this camera in the following order. ● Prior to using this camera, please read the user manual thoroughly. Before connecting the camera to a PC, ● W hen you require After Sales service, please bring the camera and the cause Set up the camera driver via the USB cable, you will need to set of the camera malfunction (such as battery, Memory card etc.) to the A/S up the camera driver. Install the c
Summary of the content on the page No. 3
Danger Warning DANGER indicates an imminently hazardous situation which, if not WARNING indicates a potentially hazardous situation which, if not avoided, avoided, will result in death or serious injury. could result in death or serious injury. ● Do not attempt to modify this camera in any way. To do so may result in fire, ● D o not use the flash in close proximity to people or animals. Positioning the injury, electric shock or severe damage to you or your camera. flash too close to your sub
Summary of the content on the page No. 4
Caution Contents CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. 007 System chart READY ● L eaking, overheating, or damaged battery could result in fire or injury. 008 Identification of features - Use battery with the correct specification for the camera. 008 Front & Top - Do not short circuit, heat or dispose of battery in fire. 009 Back - Do not insert the battery with the polarities reversed. 00 Bottom ● R
Summary of the content on the page No. 5
Contents 023 How to use the SCENE mode 038 Quality / Frame rate 02 How to use the MOVIE mode 039 Self-timer / Remote control 02 Recording the movie clip without sound 0 Voice recording / Voice memo 02 P ausing while recording a movie clip 02 White balance (Successive Recording) 03 ISO 025 Using Photo Style Selector Mode 03 Exposure compensation 026 T hings to Watch Out for When Taking 0 ACB (Auto Contrast Balance) Pictures 0 Shutter Speed 027 Using the camera
Summary of the content on the page No. 6
Contents 05 Thumbnail / Enlargement button 064 Setup menu SETUP 052 Playing Images 066 Setup menu ( ) 053 Starting the slide show 066 OSD set 05 Protecting images 066 LCD brightness 05 Deleting images 066 LCD save 055 DPOF 067 Start up image 055 DPOF : IMAGES 067 Setup menu ( ) 056 DPOF : Print size 067 Sound Volume 056 DPOF : Index 067 Operation Sound 057 Rotating an image 068 Shutter sound 057 Resize 068 Start up sound 058 Effect 068
Summary of the content on the page No. 7
Contents 073 Initialisation 073 Selecting Video out type 07 Auto power off 075 Important notes 076 Warning indicator 077 Before contacting a service centre 079 Specifications 081 Software Notes SOFTWARE 082 System Requirements 082 About the software 083 Setting up the application software 085 Starting PC mode 086 Using Removable Disk 088 Removing the removable disk 089 Setting up the USB Driver for MAC 089 Using the USB Driver for MAC 089 R emoving the USB Driver for Window
Summary of the content on the page No. 8
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Included items Camera User manual, Software CD Rechargeable battery Camera strap Product warranty (SLB-37D) AC adapter (SAC-7) / AV cable USB cable (SUC-C3) Optional items SD/SDHC/MMC memory card Camera case Remote control << 7 >>
Summary of the content on the page No. 9
Identification of features Front & Top Shutter button Power button Microphone Mode dial Speaker Photo style seclector dial Remote control sensor Flash Self-timer lamp / AF sensor USB / AV connection terminal Lens / Lens cap << 8 >>
Summary of the content on the page No. 10
Identification of features Back Camera status lamp Zoom W button (Thumbnail) Zoom T button (Digital zoom) LCD monitor Smart button Eyelet for camera strap Smart button BACK button / OIS button Play mode button << 9 >>
Summary of the content on the page No. 11
Identification of features ■ Self-timer lamp Bottom Icon Status Description Tripod socket Battery cover lever - For the first 7 seconds, the lamp blinks at second intervals. Blinking - For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals. For 2 seconds, the lamp blinks quickly at 0.25- Blinking second intervals before taking a picture. A picture will be taken after about 0 seconds and 2 Blinking seconds later a second picture will be taken. To open the battery
Summary of the content on the page No. 12
Identification of features ■ Camera Status Lamp ■ Mode icon Status Description MODE AUTO PROGRAM MANUAL T he lamp turns on and off when the camera is Icon Power on ready to take a picture. MODE DUAL IS NIGHT PORTRAIT The lamp blinks while saving the image and then After taking a picture turns off when ready to take another picture. Icon While voice memo The lamp blinks. MODE MOVIE PLAY recording - When the USB cable is The lamp lights up Icon inserted to a PC (LCD monitor turns off after i
Summary of the content on the page No. 13
Connecting to a Power Source You should use the rechargeable battery (SLB-1137D) supplied with the Based on the following shooting Recording time camera. Be sure to charge the battery before using the camera. conditions Using the fully charged battery ■ SLB-1137D rechargeable battery specification Movie Approx. 120 MIN 640x480 image size 30fps frame rate Model SLB-1137D Type Lithium Ion T hese figures are measured under Samsung’s standard conditions and Capacity 1100mAh shooting condition
Summary of the content on the page No. 14
Connecting to a Power Source You can charge the rechargeable battery (SLB-37D) by using an SAC- In the following cases, the battery may not be charged. 7 KIT. The SAC-7 KIT consists of the AC adapter (SAC-7) and the USB ● W hen using a USB cable that was not supplied with this camera. cable (SUC-C3). When the AC adapter and the USB cable are assembled, Use the supplied USB cable. it can be used as an AC cable. ● W hen using a USB hub. Connect the camera to the PC directly. ● W hen ot
Summary of the content on the page No. 15
Connecting to a Power Source ■ How to charge the rechargeable battery (SLB-37D) ● B efore inserting any cables or AC adapter, check the directions and do not insert by force. It may cause damage to the cable or camera. ● I f the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly. ● If you charge the battery with the camera power on, the battery can’t charge fully. Turn the camera o
Summary of the content on the page No. 16
Inserting the Battery Inserting the memory card Insert the battery as shown Insert the memory card as shown. - If the camera does not turn on after - Turn off the camera’s power before you have inserted battery, please check inserting the memory card. whether the battery is inserted - Have the front of the memory card with the correct polarity (+ / -). facing toward the back of the camera - D o not use force to open the battery (LCD monitor) and the card pins toward chamb
Summary of the content on the page No. 17
Instructions on using the memory card ● B e sure to format the memory card (see p.7) if you are using a newly ● I f the memory card is subjected to any of the following, the recorded data may purchased memory card for the first time, if it contains data that the camera become corrupted : cannot recognise, or if it contains images captured with a different camera. - When the memory card is used incorrectly. ● Turn off the camera power whenever the memory card is being inserted or -
Summary of the content on the page No. 18
Instructions on using the memory card The camera can use SD/SDHC Memory Cards and MMC (Multi Media When using a 256MB MMC memory, the specified shooting capacity will Cards). be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type. Recorded SUPER FINE NORMAL 30FPS 5FPS image size FINE Card pins 9 9 36 Write protect switch 55 05 5 Label 68 29 83 Still [SD (Secure Digital) memory card] 6 22 7 image
Summary of the content on the page No. 19
When Using the Camera for the First Time : Smart button This button is used for shifting the menu cursor to select or for confirming To select a sub menu, in some menus, touch the button and slide your the selected menu. finger to the left / right. 3648x2056 3072x2304 3648x2432 3648x2736 SIZE [Selecting the main menu : [Confirming the main menu : Slow Fast Touching the button] Pressing the button] [e.g. : Manual - Selecting the shutter speed] Extending the menus : P ress the extension menu b
Summary of the content on the page No. 20
When Using the Camera for the First Time : Setting up the Date / Time and Language When the camera is turned on for the first time, a menu will be displayed ■ Setting up the date, time and date type in the LCD monitor to set date, time and language. This menu will not be 1. Press the [Date & Time] menu button. 3 2008/01/01 Language displayed again after setting up the date, time and language. Set up the 2. Select a desired date type by pressing the yy/mm/dd Date & Time 3 date, time an
