Summary of the content on the page No. 1
Thank you for purchasing this AGFAPHOTO digital camera. Please read these operating instructions
carefully in order to use the digital camera correctly. Keep the instructions in a safe place after reading so
that you can refer to them later.
Precautions
• Do not aim the camera directly into the sun or other intense light sources which could damage your
eyesight.
• Do not try to open the case of the camera or attempt to modify this camera in any way. High-voltage
internal components cr
Summary of the content on the page No. 2
Parts of the Camera 1. Stabilizer 2. Shutter Button 3. Operation Lamp 4. Power Button 5. Speaker 6. Self-timer Lamp / AF Lamp 7. Microphone 8. Lens 9. Flash 10. Zoom Button 11. Playback Button 12. Strap Ring 13. SET/DISP Button / Flash Button / Macro Button 14. Mode Button 15. ASM Button / Delete Button 16. Menu Button 17. LCD Monitor 18. Battery Cover 19. USB/AV Terminal 20. Tripod Socket 2
Summary of the content on the page No. 3
Inserting the Batteries 1 Open the battery cover. Slide the battery cover in the direction indicated by the arrow. 2 Insert the batteries. Install the battery with the terminal facing inside the camera. 3 Close the battery cover. Inserting the Memory Card 1 Open the battery cover. 2 Insert the card. Insert the card with the label facing up and the arrow pointing in. T Tiip ps s To remove the card, gently press on the edge of the card and rel
Summary of the content on the page No. 4
Changing the Mode You can record images and voices in the REC mode. And using the PLAYBACK mode to replay, delete, or edit images on the LCD monitor. Switching between REC mode and PLAYBACK mode In REC mode: press the PLAYBACK button ( ) to switch to the PLAY mode. In PLAY mode: press the PLAYBACK ( ) or the MODE ( ) button to switch to the REC mode. Selecting the REC mode 1 Set the camera to the REC mode. 2 Launch the mode palette. Press the MODE button to sho
Summary of the content on the page No. 5
Using the Menus When a menu is displayed, the four-way control and the SET button are used to make the desired settings. REC menu 1 Turn the power on, and set the camera to the REC mode. 2 Open the REC menu. Press the MENU button to display the menu. 3 Select an item. Press or to select a menu item. 4 Change the setting. Press or to change the setting. 5 Press the MENU or the SET button to save the settings and close the menu. Setup menu 1
Summary of the content on the page No. 6
4 Select an item. Press or to select a menu item and then press or the SET button to launch the submenu. 5 Change the setting. Press or to select an option and press or the SET button to apply the setting. 6 Press the MENU button to close the menu. Using the Stabilizer With more sensibility and faster shutter speed to bright up the pictures, effectively prevent blur image caused by hand shack or target movement. Playing Back Images 1 Turn the pow
Summary of the content on the page No. 7
Customer care More information con the complete AGFAPHOTO digital camera product range can be found under www.plawa.com Service & Repair Hotline (EU): 00800 752 921 00 (from a landline only) Service & Support Hotline (Germany): 0900 1000 042 (1.49 Euro/ min. from a German landline only) Online Service / International contact: support-apdc@plawa.com Manufactured by plawa-feinwerktechnik GmbH & Co. KG Bleichereistraße 18 73066 Uhingen Germany AGFAPHOTO is used under li
Summary of the content on the page No. 8
Batteries and rechargeable batteries should not be thrown in the trash can. Please return used batteries to the store or take it to where they collets such items. Following this guideline we are helping not to polluting our environment. Declaration of Conformity We herewith confirm the following designated product: AGFAPHOTO digital camera DC-1338i has been tested and found to comply with the requirements set up in the council directive on the approximation of the law of members’ st
Summary of the content on the page No. 9
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. When shielded interface cables have been provided with the product or when specified additional components or accessories have elsewhere been designated to be used
