Summary of the content on the page No. 1
MODEL
AR-235
AR-275
DIGITAL COPYING MACHINE
OPERATION MANUAL
Page
• GETTING STARTED 5
• MAKING COPIES 23
• SPECIAL FUNCTIONS 41
• COPIER TROUBLE? 65
• GENERAL INFORMATION 77
• OPTIONAL EQUIPMENT 91
Summary of the content on the page No. 2
➢ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ ➢ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ FOR YOUR RECORDS ... To protect against loss or theft, record and retain for reference the copier’s serial number located on the back of the unit. Model Number Serial Number Date of Purchase Place of Purchase Authorized Sharp Copier Service Department Number ➢ ➣ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢ ➢ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
Summary of the content on the page No. 3
OUTLINE OF THIS MANUAL 1. GETTING STARTED This chapter describes the basic information on the use of this copier. 1 2. MAKING COPIES This chapter describes the basic copying functions such as normal copying, reduction or enlargement, and exposure adjustments. 2 3. SPECIAL FUNCTIONS This chapter describes special copying functions including various image editing functions. 3 4. COPIER TROUBLE? This chapter describes how to remove misfed paper and how to remedy minor problems. 4 5. GENER
Summary of the content on the page No. 4
CONTENTS Page CHAPTER 1 GETTING STARTED INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 COPIER INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PART NAMES AND FUNCTIONS . . . . . . . . . . . . .
Summary of the content on the page No. 5
Summary of the content on the page No. 6
4
Summary of the content on the page No. 7
1 CHAPTER 1 GETTING STARTED This chapter describes the basic information on the use of this copier. Page INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 COPIER INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PART
Summary of the content on the page No. 8
GETTING STARTED INTRODUCTION This copier has been designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. To get full use of all copier features, be sure to familiarize yourself with this manual and the copier. For quick reference during copier use, keep this manual in a handy location. NOTES: This copier can be used as a laser printer, a facsimile machine, and a scanner by installing optional components. However, this
Summary of the content on the page No. 9
Summary of the content on the page No. 10
GETTING STARTED COPIER INSTALLATION Improper installation may damage the copier. Please note the following during initial installation and whenever the copier is moved. CAUTION: If the copier is moved from a cool place to a warm place, condensation may form inside the copier. Operation in this condition will cause poor copy quality and malfunctions. Leave the copier at room temperature for at least 2 hours before use. Do not install your copier in areas that are: damp, humid,
Summary of the content on the page No. 11
GETTING STARTED COPIER INSTALLATION Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements (See page 89.). Also make certain the outlet is properly grounded. NOTE: 1 Connect the copier to a power outlet which is not used for other electric appliances. If a lighting fixture is connected to the same outlet, the light may flicker. Be sure to allow the required space around the machine for servicing and proper ventilation. 12"
Summary of the content on the page No. 12
GETTING STARTED MAIN FEATURES High-speed laser copying 1 First-copy time at 600 dpi (not in the super photo mode) is only 4.8 seconds (except when recovering from a power save mode or immediately after power on). Copying speed is 23 copies/min. (AR-235) or 27 copies/min. (AR-275) at 600 dpi (not in the super photo mode), which lends itself for business use, providing improvement in working efficiency. High-quality digital image 2 High-quality copying at 600 dpi or 1200 dpi (s
Summary of the content on the page No. 13
GETTING STARTED MAIN FEATURES Scan once/ Print many 4 The copier is equipped with a memory buffer allowing the copier to scan an original once and make up to 999 copies of the scanned image. This improves workflow, reduces operating noise from the copier and reduces wear and tear on the scanning mechanism, which provides for a higher reliability. 1 Optional features 5 An optional single pass feeder (SPF) allows automatic document feeding of up to 30 sheets of single-sided origina
Summary of the content on the page No. 14
Summary of the content on the page No. 15
Summary of the content on the page No. 16
GETTING STARTED PART NAMES AND FUNCTIONS Operation panel COPY key and indicator (p. 76, 84) Numeric keys Press to select the COPY mode. Use to select the desired copy quantity. Press and hold during standby or during warm- INTERRUPT key and indicator (p. 39) up to display the total output count and the Interrupts a copy run. quantity of toner remaining. CLEAR ALL key (p. 17) Mode keys and indicators Clears all selected settings and returns the Use these keys when relevant optional c
Summary of the content on the page No. 17
Summary of the content on the page No. 18
Summary of the content on the page No. 19
Summary of the content on the page No. 20
