Summary of the content on the page No. 1
Contents
Safety precautions 2
COLOUR TELEVISION
Preparation 3
...
1 Confirm which remote control you have 3
INSTRUCTIONS
...
2 Insert the batteries into the remote control 3
..................
3 Connecting the aerial and VCR 4
Thank you for buying this JVC
..........................
4 Connecting other devices 5
colour television.
5 Connect the power cord to the AC outlet ... 5
To make sure you understand how to
...............................................
6 Initial setting 6
use your new TV,
Summary of the content on the page No. 2
Safety precautions WARNING •To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION •Operate only from the power source indicated on the rear of the TV. •Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. •Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable. When installing this TV, leave spaces for ventilation around
Summary of the content on the page No. 3
Preparation 1 Confirm which remote control you have Your TV comes with one of the two remote controls shown below. Functions you can operate differ depending on the type of remote control. AV-2568TEE/AV-2978TEE> POWER POWER MUTING MUTING SYSTEM CINEMA SYSTEM COLOUR SOUND SURROUND COLOUR SOUND ECO ECO DISPLAY SENSOR DISPLAY SENSOR MENU MENU TV/TEXT TV/TEXT TV/VIDEO TV/VIDEO 123 123 OFF OFF TIMER TIMER 456 456 PICTURE PICTURE MODE MODE 789 789 CHAN
Summary of the content on the page No. 4
Preparation 3 Connecting the aerial and VCR •Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. •Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack. • If you connect the VCR to the TV only with an aerial cable, you should preset the video channel fro
Summary of the content on the page No. 5
Preparation 4 Connecting other devices If you are not connecting any other devices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output teletext programmes or component video signals. Also it cannot output
Summary of the content on the page No. 6
Preparation 6 Initial setting When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the POWER lamp Main power button language setting mode. SYSTEM CINEMA COLOUR SOUND SURROUND ECO SENSOR DISPLAY DISPLAY button MENU t MENU MENU
Summary of the content on the page No. 7
Basic operation • The illustration below is for the remote 1 Press the POWER button to turn control RM-C1013. Depending on the your TV on. applicable models, the remote controls may • If your TV does not turn on, press the Main not look exactly the same. power button on the TV then press the POWER button again. •You can also turn on your TV by pressing any of the following buttons; - the CHANNEL m button MUTING POWER - the Number buttons SYSTEM CINEMA - the TV/VIDEO button COLOUR SOUND SURROUN
Summary of the content on the page No. 8
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button You can adjust this TV so that the screen If the picture is not clear or no colour automatically adjusts to the optimum appears, change the current colour system contrast according to the brightness of your to another colour system. room. This function reduces eye strain and Press this button to select the colour the power consumption of this TV. system. Press this button to select the desired mode. AUTO PAL SECAM NTSC3
Summary of the content on the page No. 9
Remote control buttons and functions CINEMA SURROUND button MUTING button < AV2168TEE / AV2968TEE not included > You can turn the sound off instantly. Press this button. You can enjoy an enhanced sound for a To turn the sound on, press this button wider audience by using CINEMA again. SURROUND function. Press this button to select one of the CINEMA SURROUND mode. DISPLAY button You can continuously display the current HIGH/LOW: channel number or VIDEO mode on the When you listen to the stereo so
Summary of the content on the page No. 10
Remote control buttons and functions RETURN + button CHANNEL SCAN button You can set a channel you frequently view You can quickly view all TV channels to the Return Channel and you can view programmes that you can view on your TV, that channel at any time with one-touch. and search for the programme you want to view. To set the channel to the Return Channel: 1 Press this button to start scanning TV channels. 1 Select the channel you want to set The TV channel programmes are each to the Return C
Summary of the content on the page No. 11
Viewing teletext programmes Using the List Mode TV/TEXT TV/TEXT You can store the numbers of your favourite TV/VIDEO teletext pages in the List mode and call them 123 OFF up quickly using the coloured buttons. TIMER 456 PICTURE To store the page numbers: MODE 789 CHANNEL RETURN+ SCAN 1 Press the MODE button to engage - -- 0 / the List mode. CHANNEL VOLUME The stored page numbers are displayed Coloured TEXT at the bottom of the screen. buttons REVEAL HOLD INDEX SIZE REVEAL SIZE 2 Press a colour
Summary of the content on the page No. 12
Viewing teletext programmes REVEAL INDEX Some teletext pages include hidden text You can return to the index page instantly. (such as answers to a quiz). Press the INDEX button. You can display the hidden text. In the List mode: Each time you press the REVEAL button, Returns to the page number displayed in text is hidden or revealed. the lower left area of the screen. HOLD SUBPAGE You can hold a teletext page on the screen Some teletext pages include sub-pages that for as long as you want, even
Summary of the content on the page No. 13
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. / 4 Press the MENU buttons to SYSTEM CINEMA COLOUR SOUND SURROUND change function settings. ECO SENSOR DISPLAY DISPLAY button Example: Changes the AUTO MENU t SHUTOFF setting. MENU MENU / buttons buttons TV/TEXT MENU 2 MENU 2 TV/VIDEO AUTO SHUTOFF ON AUTO SHUTOFF
Summary of the content on the page No. 14
Using the TV’s menus INPUT VNR You can view images from VCRs or other You can reduce picture noise. devices connected to your TV. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 1” menu, then select “MENU 1” menu, then select “VNR”. “INPUT”. MENU 1 INPUT TV MENU 1 VNR ON INPUT TV COMPRESS(16:9) ON VNR ON PICTURE TILT 00 COMPRESS(16:9) ON PICTURE TILT
Summary of the content on the page No. 15
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no signals You can mute the sound and change the are received for about 15 minutes or longer picture into a blue screen while no signals after the end of a broadcast. are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO 1 Press MENU T to display the SHUTOFF”. “MENU 2” menu, then select “BLUE BACK”. MENU 2 AUTO SHUTOFF ON
Summary of the content on the page No. 16
Using the TV’s menus VIDEO-2 SET Picture Adjustments Set the VIDEO-2 SET correctly according to You can adjust the picture as you like. the video signal input from the external 1 Press MENU T to display the device connected to the VIDEO-2 terminal. “MENU 4” menu. If this setting is incorrect, images will not be displayed. MENU 4 TINT COLOUR 1 Press MENU T to display the BRIGHT CONT. “MENU 2” menu, then select SHARP “VIDEO-2 SET”. SELECT BY EXIT BY OPERATE BY -+ DISPLAY
Summary of the content on the page No. 17
Using the TV’s menus AI VOLUME AUTO CH PRESET You can prevent the sudden increase or You can automatically preset all TV channels decrease of volume that occurs when that can be received by your TV to channels. changing channels or switching VIDEO 1 Press MENU T to display the modes. “MENU 3” menu, then select “AUTO 1 Press MENU T to display the CH PRESET”. “MENU 5” menu, then select MENU 3 AUTO CH PRESET “AI VOLUME”. MANUAL CH PRESET LANGUAGE ENGLISH
Summary of the content on the page No. 18
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV If the picture is not clear: channels to desired channels. Fine-tune the TV channel. 1 Press MENU T to display the 1 Press MENU t to select “FINE”. “MENU 3” menu, then select MANUAL “MANUAL CH PRESET”. FINE SKIP NO SOUND SYSTEM B/G MENU 3 EXIT AUTO CH PRESET MANUAL CH PRESET SELECT BY PR 1 VL LANGUAGE ENGLISH PROGRAM BY -+ EXIT BY TEXT LANGUAGE
Summary of the content on the page No. 19
Using the TV’s menus SKIP 2 Press MENU / to select language. You can set undesired channels to be skipped. Channels set to be skipped cannot The on-screen display indications are in be selected by the CHANNEL m buttons the selected language. nor the CHANNEL SCAN button. • Channels to which TV channels have not been TEXT LANGUAGE preset are automatically set to be skipped. You can select one of 5 teletext language 1 Press MENU T to display the groups. Set the teletext language group that “MENU 3”
Summary of the content on the page No. 20
TV buttons and parts Front 8 7 9 - 345 6 2 1 VR L/MONO IN (VIDEO-3) 1 2 345 6 87 VR L/MONO IN (VIDEO-3) 9 - V L/MONO R MENU CHANNEL VOLUME POWER STANDBY IN (VIDEO-3) EXIT 2 3 4 5 7 8 9 0 - 1 2 3 4 5 7 8 9 - POWER MENU CHANNEL VOLUME VR L/MONO EXIT IN (VIDEO-3) 20 LCT1178-001A-H 20 20/6/2002, 10:27
