Summary of the content on the page No. 1
ENGLISH
COLOUR TELEVISION
INSTRUCTIONS
AV-29QS27 AV-21QS27
AV-29QX17 AV-21QX17
AV-29QX17B AV-21QX17B
AV-29QX27 AV-21QX27
AV-29RS28 AV-21RS28
AV-29RX18 AV-21RX18
AV-29RX58 AV-21RX58
AV-29RX78 AV-21RX78
AV-29SS27 AV-21SS27
AV-29SX17 AV-21SX17
This illustration shows AV-29SX77.
AV-29SX57 AV-21SX57
AV-29SX77 AV-21SX77
AV-29SX78
The illustrations of AV-29SX77 is used in this instruction manual for explanation
purpose. Your TV may not look exactly the same as illustrated.
GGT0153-001C-H
Summary of the content on the page No. 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. TO PREVENT FIRE OR SHOCK HAZARD, DO TO ENSURE PERSONAL SAFETY, OBSERVE THE NOT EXPOSE THIS APPLIANCE TO RAIN OR FOLLOWING RULES REGARDING THE USE OF WARNING CAUTION MOISTURE. THIS TV. • The apparatus • Operate only • Never block or cover the ventilation openings. shall not be from the • Never install the TV where good ventilation is unatt
Summary of the content on the page No. 3
PREPARATION FUNCTIONS REFERENCE Knowing your TVʼs features Contents Please see the chart below and check the function are equipped for your TV's model number. Knowing your TVʼs features ...................3 The model number is indicated at the rear of your TV. When you press a button concerned to a function that is not available for your TV, it does not work and the logo "Ø" appears on the screen. Connections ..........................................4 Initial settings .........................
Summary of the content on the page No. 4
IN(VIDEO-3) R L/MONO V Connections The illustration of AV-29SX77 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated. CAUTION Ensure to turn off all equipments including the TV before connecting the AC mains plug to the AC outlet. Connecting to the rear component/video Connecting to the aerial cable and VCR input terminal and output terminal VHF/UHF TV rear terminals outdoor aerial VCR (for playing) DVD player (composite signals) 75-ohm VCR (for record
Summary of the content on the page No. 5
PREPARATION Initial settings Searching for the channels (AUTO PROGRAM) Turn on the TV AUTO PROGRAM 4 1 or wait 15 seconds to 22% run Setup Tour OK / : EDIT JVC logo appears ❇ To stop or wait until AUTO PROGRAM Select a language finishes �������� 1 2 Select ������� Edit the channel list �������� ���� ���������������� ����� � � ������� 5 �� � � ����� ����������� � � � � � ����� To edit the 2 Confirm � � � ����� � � � ����� channel list, � � � ����� � � � ����� � � � ����� \ page 15. To comp
Summary of the content on the page No. 6
Remote control buttons and basic functions Turn the TV on from standby and vice versa • Insert two batteries by following the and polarities and inserting the end first. Programme and recall 4 favourite channels • Use AA/R6/UM-3 dry cell batteries. (colour buttons: red, green, yellow, blue) • If the remote control does not work properly, Choose the TV channel you wish to programme fit new batteries. The supplied batteries are for testing, not regular use. PROGRAMMED! ■ Press and hold If t
Summary of the content on the page No. 7
PREPARATION TV buttons and functions The illustration of AV-29SX77 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated. TV or Video terminal input selection, Exit from the menu Video and audio Display the menu and exit after finish setting input jacks for VIDEO-3 mode Channel selection, To select menu function ECO sensor TVʼs main power on/off Volume level adjustment, To choose a Top Remote control sensor Headphone jack menu and adjust the desired menu
Summary of the content on the page No. 8
Operating the menus (continued) You can use the DVD MENU by switch channel to VIDEO-2 or press the DVD MENU button on the remote control. See the menus location in the below table. For RF / Video-1 / Video-3 (MENU) For Video-2 (DVD MENU) Top menu Page 2nd menu 3rd menu / Adjustments 3rd menu / Adjustments DVD THEATER STATUS set to OFF : USER / SHARP / CLEAR / VIVID / SOFT 9 PICTURE MODE USER / VIVID / SOFT DVD THEATER STATUS set to ON : USER / SHARP / CLEAR PICTURE PICTURE MODE set to USER : CO
Summary of the content on the page No. 9
FUNCTIONS Picture setting COLOUR SYSTEM PICTURE MODE You can select the appropriate colour system when the picture is not clear You can choose the desired picture setting with one-touch. or no colour appears. USER You can change this picture setting (CONTRAST, AUTO → PAL → SECAM → NTSC3.58 → NTSC4.43 BRIGHT, SHARP, COLOUR, TINT) as you like. ( \ PICTURE SETTING) You can also operate this function from the menu. SHARP To sharpen the picture. MENU SET UP menu COLOUR SYSTEM VIVID Heightens c
Summary of the content on the page No. 10
Picture setting (continued) Picture in picture (PIP) operation You can display a sub picture within the main picture on the screen. AI ECO SENSOR (ECO)/ECO MODE to display the sub picture. You can automatically adjust TV screen contrast according to the brightness of your room. You can hear the sound from the main picture only. OFF Cancel the function. When main picture and sub picture are the same TV channel: MODE-1/ECO-1 Mild contrast (recommended). MODE-2/ECO-2 Even contrast. Press SUB-P
Summary of the content on the page No. 11
FUNCTIONS Teletext operation Sound setting TELETEXT MaxxBass You can watch the Teletext broadcast channel with TEXT function. You can enjoy an enhanced bass sound which cannot be played by normal speakers. 1 TV mode → TEXT twin mode → TEXT mode OFF MaxxBass is turned off. HIGH MaxxBass effect is high. 2 Selecting other Teletext pages. LOW MaxxBass effect is low. You can also operate this function from the menu. OR OR MENU SOUND menu MaxxBass "MaxxBass" is a registered trademark of Waves Audi
Summary of the content on the page No. 12
Sound setting (continued) STEREO / I II ( I/II) AI VOLUME ß You can enjoy the stereo and bilingual broadcasted programmes. You can adjust the volume of all the channels and video inputs to the same level automatically depends on the strength of signal of the sources. Select stereo sound. (Choose ON or OFF) MENU SOUND menu AI VOLUME Select monaural sound. I Select bilingual I (sub I). SOUND SYSTEM II Select bilingual II (sub II). This function is only available in RF mode. You can select an a
Summary of the content on the page No. 13
FUNCTIONS Customized setting AUTO SIGNAL DETECT VNR When the DVD input signal is detected, the input mode will automatically You can reduce the picture noise. change to VIDEO-2 and when the DVD input signal is not detected, the MENU PICTURE menu VNR input mode will automatically change to RF previous input mode. OFF VNR is turned off. DVD players: Press the “POWER ON” button on the player for signal detection. AUTO Effect of VNR is automatically controlled. VCRs: Press the “POWER ON” button on
Summary of the content on the page No. 14
Customized setting (continued) ON TIMER BEEP You can set the TV to turn on automatically from standby mode at a set You can use the BEEP function to alert you during AUTO SIGNAL channel and time. DETECT, Al ECO SENSOR Detect, Stereo Detect, ON TIMER/OFF TIMER operations and when some buttons on the remote control are MENU FEATURES menu ON TIMER 1 pressed. �� � ����� �� ������� (Choose ON or OFF) MENU FEATURES menu BEEP �� � ����� ����� � � ��� �������� ����� � � ������� CHILD LOCK ����� ����
Summary of the content on the page No. 15
FUNCTIONS TV channel presetting To register the TV channels automatically OR 6 to search for the TV channel. (AUTO PROGRAM) (red) (green) You can register the TV channels automatically. 7 Searching stops when a channel is found and displayed. MENU SET UP menu AUTO PROGRAM 1 If the reception is Press the yellow or blue button to fine tune the TV AUTO PROGRAM poor channel. 2 If noisy sound is Press the 3 button to choose an appropriate sound 22% heard system. or OK / : EDIT 8 to exit.
Summary of the content on the page No. 16
TV channel presetting (continued) CH/CC number CC US CCIR O IRT AUSTRALIA CH US CCIR O IRT AUSTRALIA When you want to use the INSERT function on CC 18 E S-18 CH 33 US-33, W+48 E33 AU-34 CH 34 US-34, W+49 E34 AU-35 CC 19 F S-19 page 15, find the CH/CC number corresponding CC 20 G S-20 CH 35 US-35, W+50 E35 AU-36 to the channel number of the TV channel from CC 21 H S-21 CH 36 US-36, W+51 E36 AU-37 CC 22 I S-22 CH 37 US-37, W+52 E37 AU-38 this table. CC 23 J S-23 CH 38 US-38, W+53 E38 AU-39/AU-40
Summary of the content on the page No. 17
REFERENCE Troubleshooting If a problem occurs when you are using the TV, check the below Problem Cause / Solution Page troubleshooting guide before calling for repair. Colour patches appear • This maybe due to magnetized device such – at the corner of the as a speaker placed near to your TV. Move it Problem Cause / Solution Page screen away from your TV. Alternatively, you can also No picture, no sound • Deactivate the BLUE BACK function if it is 9 use the magnetic shielded speaker. turned o
Summary of the content on the page No. 18
Specifications TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50 Hz / 60 Hz External input / output VIDEO-1 S-video input, VIDEO input, AUDIO L/R input VIDEO-2/COMPONENT VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input VIDEO-3 VIDEO input, AUDIO L/R input OUTPUT
Summary of the content on the page No. 19
REFERENCE Memo 19
Summary of the content on the page No. 20
© 2008 Victor Company of Japan, Limited 0508SCT-NF-MT
