Summary of the content on the page No. 1
COLOUR TELEVISION
Contents
AV-14145
Knowing your TV’s features ........................... 2
.
AV-14148 Remote control buttons and basic functions 3
..............................
TV buttons and functions 5
........................................
Setting up your TV 6
.................................
Basic setting for picture 8
..........................
Advanced setting for picture 9
..................................
Basic setting for sound 9
.........................
Advanced setting for sou
Summary of the content on the page No. 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual throughly before you begin. Safety Instructions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV,
Summary of the content on the page No. 3
Remote control buttons and basic functions 1 6 9 0 2 8 3 7 4 5 RM-C1261 No.Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5/∞/2/3 Select and adjust menu function. 4 CHANNEL M Select the desired channel number. 5 VOLUME M Adjust the volume level. 6 TV/VIDEO Select TV or VIDEO terminal input. 7 MUTING Turn off the volume. Press this button again to resume the volume. 8 DISPLAY Display the programme number or video terminal number a
Summary of the content on the page No. 4
Remote control buttons and basic functions How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2.To exit the MENU, press the DISPLAY/BACK button* 8 or choose EXIT menu. Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Press ∞ button 3 to display the Then press MENU/OK button 2. next page for more functions. Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 3rd menu. Press 5/
Summary of the content on the page No. 5
TV buttons and functions The following illustrations are for AV-14145 and AV-14148 Front of the TV 9 8 7 6 5 4 3 2 1 AV-14145 MENU VIDEO AUDIO OK IN (VIDEO-2) 9 8 7 6 5 4 3 2 1 AV-14148 MENU VIDEO AUDIO OK IN (VIDEO-2) Rear of the TV = - 0 No. Button/terminal Description 1I (main power) Press to turn on or turn off the TV’s main power. 2 Power lamp Indicate the TV is being turned on or off. No colour : TV’s main power is being turned off. Red : TV’s m
Summary of the content on the page No. 6
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial To install rod aerial Install into the top-rear aerial holder. Once installed, it cannot be removed. indoor aerial Rod aerial VHF/UHF outdoor aerial Aerial holder Rear of the TV If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable. Then connect the output
Summary of the content on the page No. 7
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below : êìëëäàâ 7 •Press 5/∞ button to select your desired • Press the red button to cancel the SETUP language. TOUR RESTART function. If you want to make initial settings again when the next time you turn on the TV, ≠ press the MENU/OK butto
Summary of the content on the page No. 8
Basic setting for picture To operate this function with a menu: COLOUR SYSTEM ❇ MENU PICTURE PICTURE MODE You can select the appropriate colour system when the picture is not clear or no colour To return the USER setting to the default, press appears. the blue button when the PICTURE SETTING Press the COLOUR SYSTEM button to select a menu appears. setting. In TV mode: Adjusting the picture - USER AUTO PAL SECAM You can adjust the desired picture setting when selecting USER in PICTURE MODE. In VI
Summary of the content on the page No. 9
Advance setting for picture ❇ MENU INSTALL BLUE BACK BLUE BACK If you wish to continue viewing the poor picture, You can set the TV to automatically change to a cancel the BLUE BACK function. blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. Basic setting for sound SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appear
Summary of the content on the page No. 10
Favorite channel and video setting To register the favorite channel To adjust the video setting (VIDEO SETTING) You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, You can adjust the picture settings for video blue). inputs. 1 In TV mode, select a TV channel (PR01- 99) 1 Display the PICTURE menu and select you desired to register. VIDEO SETTING in PICTURE FEATURES menu. 2 Press and hold a colour button for 3 seconds or more. ❇ “FAVORITE CHANNEL 7 PROG
Summary of the content on the page No. 11
Customized setting To operate this function with a menu: VNR MENU FEATURES OFF TIMER ❇ You can reduce the noise. When the elapsed of time left one minute, Select the VNR in the PICTURE FEATURES menu “GOOD NIGHT!” appears on the screen. under PICTURE menu, then choose a setting of You can display the OFF TIMER menu again to VNR function. confirm or change the remaining time. MENU PICTURE PICTURE FEATURES ❇ VNR AUTO SHUTOFF OFF VNR is turned off. You can set the TV to turn off automatically AUTO E
Summary of the content on the page No. 12
TV channel presetting 5 Press the 3 button to choose an appropri- To register the TV channels auto- ate sound system. matically For details, see “SOUND SYSTEM” on page 9. You can register the TV channels into the TV’s channel list automatically. 6 Press the green or red button to search for the TV channel. 1 Display the INSTALL menu. Searching stops when a channel is found ❇ MENU INSTALL and displayed. 2 Choose AUTO PROGRAM, then press the 7 Repeat step 5 until your desired TV MENU/OK button. ch
Summary of the content on the page No. 13
TV channel presetting Channel To add in the new channel CH US CCIR OIRT AUSTRALIA CH US CCIR OIRT AUSTRALIA (INSERT in the EDIT menu) CH 02 US- 2 E2 R1 AU- 0 CH 36 US- 36, W+ 51 E36 CH 03 US- 3 E3 AU- 1 CH 37 US- 37, W+ 52 E37 You can add in the new channel in the TV CH 04 US- 4 E4 R2 AU- 2 CH 38 US- 38, W+ 53 E38 CH 05 US- 5 E5 R6 AU- 6 CH 39 US- 39, W+ 54 E39 channel list as you like. CH 06 US- 6 E6 R7 AU- 7 CH 40 US- 40, W+ 55 E40 You need to find the “CH/CC” number for the TV CH 07 US- 7 E7
Summary of the content on the page No. 14
Additional preparation The illustrations shown in this section are for AV-14145 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting Front of the TV • Read the manuals provided with the devices for the proper connection. Camcorder or TV game • Turn off all the devices including the TV. • Note that connecting cables are not supplied. Headphones Rear of the TV VCR (for playing) D
Summary of the content on the page No. 15
Specifications TV RF systems B/G, I, D/K Colour systems TV mode: PAL, SECAM VIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50/60 Hz External input / output VIDEO-1: VIDEO input, AUDIO input VIDEO-2: VIDEO input, AUDIO input, (For AV-14148, You can choose to connect one of AUDIO input jacks) OUTPUT: VIDEO output ,
Summary of the content on the page No. 16
© 2004 Victor Company of Japan, Limited 0904-NIC-JMT GGT0033-001A-H-Cover 20 8/24/04, 10:04
