Summary of the content on the page No. 1
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 1
For models:
COLOR TELEVISION
AV-36F802
USER'S GUIDE
AV-36F702
AV-32F802
AV-32F702
AV-27F802
AV-27F702
Illustration of AV-27F802 and RM-C301G
IMPORTANT NOTE TO THE CUSTOMER
In the spaces below, enter the model and serial number of your television (locat-
ed at the rear of the television cabinet). Staple your sales receipt or invoice to
the inside cover of this guide. Keep this user's guide in a convenient place for
future reference. Keep the carton an
Summary of the content on the page No. 2
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 2 IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, with- in an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude
Summary of the content on the page No. 3
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 3 IMPORTANT SAFEGUARDS CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TVset, observe the following basic rules for its installation, use and servicing. And also follow all warnings and in
Summary of the content on the page No. 4
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 4 7 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE 8 TV sets are provided with ventilation openi
Summary of the content on the page No. 5
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 5 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna.This will prevent damage to product due to lightning storms or power line surges. 14 A TVset and cart combination should be moved with care. Quick stops, excessive force, and uneven sur- faces may cause the TV set and cart combination to overturn. SERVICE 15
Summary of the content on the page No. 6
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 6 Table of Contents PICTURE SETTINGS . . . . . . . 34 UNPACKING YOUR TV . . . . . 7 Tint . . . . . . . . . . . . . . . . . 34 Color . . . . . . . . . . . . . . . 34 QUICK SETUP. . . . . . . . . . . 8 Picture . . . . . . . . . . . . . . . 34 Getting Started . . . . . . . . . 8 Bright . . . . . . . . . . . . . . . 34 Remote Control . . . . . . . . . 8 Detail . . . . . . . . . . . . . . . 34 Batteries . . . . . . . . . . . . . 8 Noise Muting . . .
Summary of the content on the page No. 7
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 7 Unpacking Your Television Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: 1 Remote Two AA 1 Television Control Batteries A matching TV stand is also available (optional). Note: Your remote control may differ from the example illustrated here. Once you have unpacked you
Summary of the content on the page No. 8
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 8 Quick Setup 1 Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. This information includes basic instructions on operating your remote control, making a simple cable/antenna and optional VCR connection and, finally, information on programming your television's Auto Tuner. If you have questions, or for more detailed information on any of these
Summary of the content on the page No. 9
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 9 Quick Setup 2 Step Two - Making Basic Connections Next you will need to connect your television to an antenna or cable system. The most basic antenna/cable connection is shown below. For more detailed connections, such as ones where a cable box is required, see pages 11 to 13. Cable/RF connector Illustration of AV-27F802 1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV. You may also wish to connect a VCR at th
Summary of the content on the page No. 10
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 10 Quick Setup 3 Step Three - The Plug In Menu When you turn your television on for the first time the Plug In Menu will appear. This menu sets some of the basic settings for your television. A complete description of the Plug In Menu can be found starting on page 22. We recommend you complete the Plug In Menu items before you start using your television. But to begin watching your television right away you only need to run the Auto Tuner Setup. This le
Summary of the content on the page No. 11
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 11 Connections Cable and VCR Connections There are three basic types of antenna or cable connections: • If you have an antenna or have a cable system that does not require you use a cable box to select channels, please refer to Diagram #1. • If you have a cable system that requires the use of a cable box to access all the chan- nels, please refer to Diagram #2. If you cannot operate your Picture-In-Picture function using Diagram #2, try the co
Summary of the content on the page No. 12
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 12 Connections Cable and VCR Connections - Continued Diagram #2 Illustration of AV-27F802 1) Connect the antenna or cable TV wire from the wall outlet, in to the RFInput of the cable box. 2) Connect an RF cable from the RFOutput of the cable box, in to the RFInput on the back of the VCR. 3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV. 4) Connect the yellow video cable out from the VCR’s Video Output,
Summary of the content on the page No. 13
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 13 Connections Cable and VCR Connections - Continued Diagram #3 Illustration of AV-27F802 1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter. 2) Connect an RFcable from the one of the RFOutputs on the splitter, in to the cable box RF Input. 3) Connect an RF cable from the Cable Box Output, in to the VCR RF Input. 4) Connect an RFcable from the other the RFOutput on the splitter, in to the RF Inpu
Summary of the content on the page No. 14
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 14 Connections Connecting to a DVD player Illustration of AV-27F802 1) Connect Green cable out from DVD player “Y”Component Output, in to TV“Y” Component Input. 2) Connect Blue cable out from DVDplayer “PB” Component Output, in to TV “PB” Component Input. 3) Connect Red cable out from DVD Player “PR” Component Output, in to TV “PR” Component Input. 4) Connect White Audio cable out from DVDLeft Audio Output, in to TV Left Audio Input 2. 5) Connect R
Summary of the content on the page No. 15
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 15 Connections Connecting to an External Amplifier Illustration of AV-27F802 1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack. 2) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right Audio Input jack. • See also “TV Speaker” and “Audio Out”on page 38 for more information on using external speakers. Connecting to a Camcorder You may connect a camcorder t
Summary of the content on the page No. 16
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 16 Connections Connecting to JVC AV Compu Link JVC’s AV Compu Link feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC-brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV Compu Link, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input. • The AV Compu Link
Summary of the content on the page No. 17
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 17 Remote Control Remote Control Basics • Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions. (For an illustration, please see page 8.) • Press the POWER button to turn the television on or off. • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. • Slide the VCR/DVD selector switch t
Summary of the content on the page No. 18
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 18 Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control sup- plied by the manufacturer. Cable Box or Satellite codes The remote control is programmed with CATV and/or Satellite codes for po
Summary of the content on the page No. 19
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 19 Remote Programming VCR codes The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward, rewind, pause, record, channel up, and channel down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the DISPLAY button. 4) With the DISPLAY button held down, enter the first code numb
Summary of the content on the page No. 20
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 20 Remote Programming DVD codes The remote control is programmed with DVD codes for power on, power off, play, stop, fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the DISPLAY button. 4) With the DISPLAY button held dow
