Technicolor - Thomson ITC008 user manual

Summary of the content on the page No. 1

ITC008_en 3/03/03 16:33 Page 1
The mains plug must be easily accessible.
About this manual
In the following cases, we recommend that you pull
out the mains connector:
This manual is common to several TV models.
1. During a thunderstorm. In such a case, it is
Therefore, the model you bought may not support
some of the functions or settings described advisable that you also disconnect the TV set from
hereinafter.
the aerial socket.
2. When odour or smoke emanates from the set.
About the On/Off s

Summary of the content on the page No. 2

ITC008_en 3/03/03 16:33 Page 2 Set-up To set up your TV set, follow the instructions on this page before you continue with the channel set-up procedure described on page 4. 1. Put the batteries in the remote control unit. Inserting batteries (2 x LR 03-AAA). 1 PRECAUTIONS ON USING BATTERIES - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries. - Do not expose batteries to excessive heat, throw

Summary of the content on the page No. 3

ITC008_en 3/03/03 16:33 Page 3 Remote Controls: RC 111TA1G and RC 311TA1G Depending on the model of remote control supplied with your TV set, you can also use it to operate most DVD players and recent video recorders made by Thomson, Saba, Brandt, Ferguson and Telefunken. Press the key corresponding to the appliance you want to operate (RC 311TA1G only). To switch your machine on / off (stand-by). - Personal Adjustments (PRESETS). - Timer (ZZZ/LIST). - Display of channel, stand-by time (INFO).

Summary of the content on the page No. 4

ITC008_en 3/03/03 16:33 Page 4 • Start the Automatic Channel Set-up by About the TV set pressing the ok key. Prior to enjoying your TV set, you’ll have to set it up, Two new lines appear showing the frequency and i.e. to find and store the channels, which may be programme number on which each new channel found received in your area. The Automatic Channel Set-up is memorised. will look for all the channels and number them. Since the channel numbers assigned to the programmes by Wait a few minu

Summary of the content on the page No. 5

ITC008_en 3/03/03 16:33 Page 5 Manual Channel Set-up Adjusting the Picture With the manual set-up Display the Image menu by pressing MENU on the 1. Display the INSTALL. menu by pressing MENU remote control unit: on the remote control unit: - Once for mono TV sets. - Twice for mono TV sets. - Twice for stereo TV sets. - Three times for stereo TV sets. The first line (Auto.) is selected. Through the Up/Down keys, select the function you 2. Select the Manual line using the Up/Down want to adjust

Summary of the content on the page No. 6

ITC008_en 3/03/03 16:33 Page 6 How to display the channel number? Daily use With the INFO key, display or remove the channel number and, if you want it, the time left before timer- How to switch on the set? programmed switch-off. With the On/Off-button fitted on the set. When the red LED is lit, the TV set has previously been switched on How to recall the preferred settings? standby with the key B on the remote control. Press on the red key to recall the sound and picture If the red LED flashe

Summary of the content on the page No. 7

ITC008_en 3/03/03 16:33 Page 7 Temporary modification of the character set table The Videotext for teletext How to use Videotext? You can temporarily modify the character set table (If included). for teletext. Press the key TEXT to display the Summary (page 100). While the navigator banner is displayed, press ok. In the green rectangle ??? is replaced by TXT 1. Calling up a page - Enter the 3 digits of the number (e.g. 150, 170) of Using the green key, choose the correct table number the pa

Summary of the content on the page No. 8

ITC008_en 3/03/03 16:33 Page 8 Front Audio/Video /S-Vidéo sockets (3) Connections (sur modèles équipés) The Audio/Video sockets allow you to connect a VHS- The scart cable AV1 (1) or 8 mm-camcorder. The Audio/S-Video sockets allow The scart cable AV1 allows you to connect a VCR or you to connect a VHS- or Hi 8-camcorder. camcorder (VHS, 8 mm), a Canal + decoder, a video To view images produced by an appliance connected: game machine or devices supplying a RGB signal. To the AV1 peritel sock