Summary of the content on the page No. 1
TX-P2670WH
TX-P2675WH
TX-P3071WH
TX-P3075WH
DIGITAL TELEVISION
1-800-SAMSUNG (1-800-726-7864)
U.S.A
Samsung Electronics America
Service Division
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
www.samsungusa.com
CANADA
Samsung Electronics Canada Inc.
.....................
Samsung Customer Care
Owner’s
7037 Financial Drive
Mississauga, Ontario
L5N 6R3 Instructions
www.samsung.ca
AA68-03263A-00
............................................................................................
Summary of the content on the page No. 2
Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the tota
Summary of the content on the page No. 3
A Guide to Digital TV What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting (providing electronic pro- gram guides and interactive television). Several of these services can be combined into a single digital bro
Summary of the content on the page No. 4
How to View Digital Television There are three ways to watch DTV. The first is to use an integrated digital TV; one with a built-in digital television tuner. The second is to connect an external DTV set-top receiver to a DTV-ready television or monitor. This type of TV or monitor will have wideband component video and stereo audio inputs. You can also watch DTV signals with personal computer (PC) tuner cards and computer monitors. 1. Integrated TVs versus DTV-ready TVs and monitors The advantage
Summary of the content on the page No. 5
Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assign- ments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna. If your DTV channels are on UHF and you already get good UHF reception, y
Summary of the content on the page No. 6
CONTENTS Chapter 1: Your New Digital TV . . . . . . . . . .8 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . . . .9 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Side Panel Jacks . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 7
CONTENTS Chapter 3: Operation (Cont.) . . . . . . . . . . . .40 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Option 1: Setting the Clock Manually . . . . . . . . . . . . . . . . . .40 Option 2: Setting the Clock Automatically . . . . . . . . . . . . . .42 Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Setting the Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Assigning Nam
Summary of the content on the page No. 8
YOUR NEW DIGITAL TV Chapter One YOUR NEW DIGITAL TV List of Features Your Samsung TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features: • Easy-to-use remote control • Easy-to-use on-screen menu system • Automatic timer to turn the TV on and off • Adjustable picture and sound settings that can be stored in the TV’s memory • A special filter to reduce or eliminate reception problems • Fine tuning control for the sharpest pictur
Summary of the content on the page No. 9
YOUR NEW DIGITAL TV Familiarizing Yourself with Your New TV Front/Side Panel Buttons The buttons on the front/side panel control your TV’s basic features, including the on- screen menu. To use the more advanced features, you must use the remote control. TX-P2675WH/TX-P3075WH TX-P3071WH TX-P2670WH Œ TV/VIDEO & ENTER ¨ CH and CH Press to change between viewing TV programs Press to change channels. Also, press to and signals from other components. highlight various items on the on-screen menu. W
Summary of the content on the page No. 10
YOUR NEW DIGITAL TV Side Panel Jacks You can use the side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see page 23.) Œ AUDIO INPUT jacks Use to connect the audio signals from a camcorder or a video game. ´ VIDEO1 INPUT jack Use to connect a video signal from a camcorder or a video game. ˇ S-VIDEO INPUT jack Use to connect an S-Video signal from a camcorder or a video game. Note: In S-Video m
Summary of the content on the page No. 11
YOUR NEW DIGITAL TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continu- ously, such as a VCR or a DVD player. Your TV has several input jacks, so you can connect different A/V components simulta- neously (i.e., a VCR and a DVD, 2 VCRs, etc.). For more information on connecting equipment, see page 14~24. Œ DVI (Digital Visual Interface) Ø S-VIDEO INPUT jack AUDIO INPUT jacks Connect to S-VIDEO output jacks of an S-VHS Receives the digital audio s
Summary of the content on the page No. 12
YOUR NEW DIGITAL TV Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your Set-Top Box, VCR, Cable Box and DVD. See page 76 for details. Œ POWER Ò MODE Turns the TV on and off. Selects a target device to be con- trolled by the Samsung remote ´ ANTENNA control(i.e., TV, STB, VCR, Cable Press to select ANT A or box or DVD). ANT B. Ú PRE-CH ˇ TV/COMP. Tunes to the
Summary of the content on the page No. 13
YOUR NEW DIGITAL TV Remote Control (continued) ˛ ADD/DEL ÷ SLEEP Press to add or erase channels Press to select a preset time in the TV’s memory. interval for automatic shutoff. ◊ AUTO.PROG ® MTS (Multi-channel Press to display the Memorized Television Sound) Channels menu. Press to choose stereo, mono or Secondary Audio Program (SAP ± BBE broadcast). BBE is a built-in effect that adds clarity, punch and dynamics to the sound. ∑ R.SURF Press the R.SURF button to auto- ≠ CAPTION matically return
Summary of the content on the page No. 14
2 Chapter Two INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads,” below. If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 15. If you have two antennas, see “Separate VHF and UHF Antennas,” on page 15. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300- ohm twin flat leads
Summary of the content on the page No. 15
INSTALLATION Antennas with 75-ohm Round Leads Plug the antenna lead into the ANT A or ANT B terminal on the rear panel. Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner. 2 Plug the combiner into the ANT A or ANT B terminal on th
Summary of the content on the page No. 16
INSTALLATION Cable with a Cable box that Descrambles All Channels 1 Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT”, or simply, “OUT”. 2 Connect the other end of this cable to the ANT A or ANT B terminal on the rear of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-wa
Summary of the content on the page No. 17
INSTALLATION 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch. 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the ANT A or ANT B terminal on the rear of the TV. After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch t
Summary of the content on the page No. 18
INSTALLATION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 14~17). Skip step 1 if you have not yet connected to an antenna or a cable system. TV Rear Panel 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal
Summary of the content on the page No. 19
INSTALLATION Connecting an S-VHS VCR Your TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) TV Rear Panel 1 To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO IN 1 jacks on the TV. 3 Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO j
Summary of the content on the page No. 20
INSTALLATION Connecting a DVD Player Connecting to Y, PB, PR The rear panel jacks on your TV make it easy to connect a DVD player to your TV. TV Rear Panel 1 Connect a set of audio cables between the COMPONENT 1 INPUT (L, R) or COMPONENT 2 INPUT (L, R) jacks on the TV and the AUDIO OUT jacks on the DVD player. 2 Connect a video cable between the COMPONENT 1 INPUT (Y, PB, PR) or COMPONENT 2 INPUT (Y, PB, PR) jacks on the TV and the DVD OUT (Y, PB, PR) jacks on the DVD player. Note: For an explan
