Summary of the content on the page No. 1
OWNER'S MANUAL
51CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 5160G
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4164
Standards Australia
APP No: N15959
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Summary of the content on the page No. 2
Contents Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. CONTENTS Features ...................................................................
Summary of the content on the page No. 3
Contents (continued) Contents Channel Selection ................................................................................................... 15 Adjusting Picture ..................................................................................................... 16 Sound Control ......................................................................................................... 17 Clock Setting .........................................................................................
Summary of the content on the page No. 4
Features Features Hyperband TV System: PAL B/G, NTSC Playback 255 preset channels Automatic channel preset Full function remote control English/French/Spanish/Indonesian on-screen display AV input & S-VIDEO input terminals Clock/Game/Calendar Digital AFT technology Four picture modes ON timer/OFF timer Green Power Hotel lock 1
Summary of the content on the page No. 5
Important Safety Cautions Safety Cautions 1 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. 2 Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom. 3 When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth. 4 Avoid exposi
Summary of the content on the page No. 6
! This TV set can operate on an AC power of 240V, 50HZ. You must not use a power supply of any other type. 5 High voltage exists in this TV set. Do not remove the cover 6 Do not cover the ventilating hole in the cabinet Keep a space of more than 5cm from the walls to the TV set to ensure adequate ventilation. 7 If the power cord or the plug is damaged contact a qualified service department for service. 8 When the TV set is to be left unattended for a long period of time, turn off the power suppl
Summary of the content on the page No. 7
Introduction Identification of Controls Front/Back view Front 1. :Earphone Jack AV input terminals (VIDEO, AUDIO L/MONO, R) 2. MENU button: To enter into menu operation. 3. AV/TV button: Video input select. 4. VOL- button: volume down adjust; menu item adjust. 5. VOL+ button: volume up adjust; menu item adjust. 6. CH- button: channel down select; menu item select. 7. CH+ button: channel up select; menu item select. 4
Summary of the content on the page No. 8
Back 1. Antenna input 2. AV input (VIDEO, AUDIO L/MONO, R) 3. S-VIDEO input 5
Summary of the content on the page No. 9
Introduction Identification of Controls (continued) Remote Controller ! Notes: In most cases, the function CH+/- buttons are equal to the buttons, and the function of VOL+/- buttons are equal to the buttons. / 6
Summary of the content on the page No. 10
Effective range of the Remote Installing batteries 1 Open the battery cover. 2 Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. 3 ! Notes: Replace the battery cover. When there is an obstacle between the TV and the transmitter, the transmitter may not operate. ! Notes: When direct sunlight, and incandescent lamp, The battery life should be about one year under normal fluorescent lamp or any other strong light shines on use.
Summary of the content on the page No. 11
Installation INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna Installation/Connect to video and audio equipment Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular are
Summary of the content on the page No. 12
Connect to video and audio equipment This TV set provides 2 groups of AV input terminals for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well. Important notes on the AV input terminals Please do not connect and use the front and rear input terminals at the same time. You can also use the AV terminals on the TV set rear as follows. ! Notes: Please do not connect and use the S-VIDE
Summary of the content on the page No. 13
Operations Turning on/off Turning on/off Turning on Press the Power Switch on the TV set. 1 If no picture appears, then the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press the button on the 2 remote controller and the TV set is turned on. In STANDBY mode, you can also press the 3 AV/TV button on the set to turn on. ! Notes: If there is no input signal, then a blueback appears. After 15 minutes, the set auto goes to STANDBY. Turning off Press the Power Switch on th
Summary of the content on the page No. 14
Operations Select Input Signal Select input signal Select input signal Press AV/TV button on the TV set or AV button 1 on the remote control. When the set is in TV mode, press this button and the set goes to AV mode. Now you could watch video program from AV input terminals. If you want to switch to TV press AV button again or follow step 2, 3 or 4. Press digit buttons to switch back to TV mode. 2 Press CH+ or CH- button to switch back to TV 3 mode. 4 Press button to switch back to TV mode.
Summary of the content on the page No. 15
Operations Press MENU button four times to call Program 1 menu page. 2 Press CH+ or CH- buttons to select item. Tuning in Press VOL+ or VOL- buttons to adjust item. 3 Auto search/Manual search/Channel skip/Fine tuning Auto Search Press MENU button repeatedly to enter into 1 Program menu page. Press CH+ or CH- button repeatedly to select 2 Auto Search item. Press VOL+ button to start Auto Search towards 3 higher frequency; or press VOL- button to start Auto Search towards lower frequency. All act
Summary of the content on the page No. 16
Channel Skip/Fine tuning Skip an unnecessary channel Press MENU button repeatedly to enter into 1 Program menu page. Press CH+ or CH- button repeatedly to select 2 Channel Number item. Press VOL+ or VOL- button to set a channel 3 number (for example, channel 99). Press CH+ or CH- button 4 repeatedly to select Channel Skip. Press VOL+ or VOL- 5 button to set to On. Now channel 99 will be skipped when you browse channels by CH+ or CH- button. To restore a skipped channel, please use digit butto
Summary of the content on the page No. 17
Operations Tuning in (Continued) Colour System/Sound System Selection Setting Colour System If the picture colour is abnormal, maybe the colour system setting is wrong. Then you can select a proper colour system as follows. Press MENU button repeatedly to enter into 1 Program menu page. Press VOL+or VOL- 2 button to select a proper colour system. Setting Sound System If the sound is abnormal, maybe the sound system setting is wrong. Then you can select a proper sound system as follows. Press ME
Summary of the content on the page No. 18
Operations Channel Selection Channel Selection 1 Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press 0-9 direct Press -/-- button 8 channel selector. repeatedly to display "-". To select two-digit channel: Press -/-- button Press 1-9 Press 0-9 18 -- -1 repeatedly to buttons. buttons. display "--". To select three-digit channel: Press -/-- button --- -- 1 -16 168 repeatedly to display "--" Press 1-2 Press 0-9 Press 0-9 buttons. buttons. buttons. ! Notes: The ma
Summary of the content on the page No. 19
Operations Adjusting Picture Contrast/Colour/Brightness/Sharpness/Picture Mode Adjusting Picture Press MENU button, the Picture menu page 1 displays. Press CH+ or CH- button to select item. 2 Press VOL+ or VOL- button to adjust. 3 Item VOL- VOL+ Contrast weaker stronger deeper Color paler Brightness Brightness darker lighter Sharpness softer sharper Tint* purplish greenish * Note: The item TINT is for NTSC only. The adjusted settings are stored in the user-set mode. There are three preset pictu
Summary of the content on the page No. 20
Operations Sound Control Adjusting Volume/Muting the Sound Use VOL+ or VOL- button. 1 Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. The minimum volume is 0 and the maximum volume is 100. Use MUTE button. 2 If you want to mute the sound, press button on the remote. To resume the sound, press this button again. ! Notes: You can also resume the sound by pressing VOL+ or VOL- button. 17
