Summary of the content on the page No. 1
OWNER'S MANUAL
MANUAL DE INSTRUCCIONES
MTS STEREO COLOR TELEVISION
TELEVISOR COLOR ESTEREO MTS
MT2252S
MT2271S
ATTENTION
ATENCION
If you purchase a universal remote control from your local retailer, please contact the
remote manufacturer for the required programming code.
Si usted a comprado un control de remoto universal, por favor comunicace con el
fabricante para el codico de programaccion requerido.
TV/CATV MODE SELECTION
SELECCION DE MODO DE TV/CATV
When shipped from the factory, the TV/CAT
Summary of the content on the page No. 2
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER The exclamation point within an equilateral triangle is intended to alert (OR BACK). NO USER-SERVICEABLE the user to the presence of important operating and maintena
Summary of the content on the page No. 3
13. LIGHTNING To protect your unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
Summary of the content on the page No. 4
POWER - SET + VOLUME MENU ENTER RESET CHANNEL FEATURES • 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in your area or your cable system. • On-Screen 3 Language Display - This TV can display the o
Summary of the content on the page No. 5
REMOTE CONTROL 4. SLEEP Button - To set the TV to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes each time POWER 1 the button is pressed in the order of 120, 110, 100, ······ 20, 10, 0. After the sleep time is programmed, the display will 12 3 disappear then reappear momentarily every ten minutes to remind you the sleep timer function is operating. To confirm 45 6 the sleep time setting, press the SLEEP button once and t
Summary of the content on the page No. 6
ANTENNA/CATV CONNECTIONS Combination VHF/UHF Antenna This television has an extended tuning range and can tune most Single 75 ohm Cable cable channels without using a cable company supplied 300 ohm Twin-lead Wire converter box. Some cable companies offer "premium pay Take off the Splitter channels" in which the signal is Splitter scrambled. Descrambling these signals for normal viewing 300-75 ohm . ANT OUT IN UHF Antenna requires the use of a descrambler MONO S-VIDEO L Matching Transformer R dev
Summary of the content on the page No. 7
AUDIO / VIDEO JACK CONNECTIONS (CONTINUED) 4. To connect the TV to a VCR with an S-VIDEO jack If you connect a VCR with an S-video jack to the S-VIDEO jack on the rear of TV, you must also connect the audio cables to the AUDIO IN jacks on the rear of the TV. The S-video cable only carries the video signal. Audio signal is separate. Rear of TV VCR OUT IN S-VIDEO NOTE: When the S-video cable and the video cable S-VIDEO are connected to each jack at the same time, the S-video cable takes precedence
Summary of the content on the page No. 8
TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature which AUTOMATIC CHANNEL MEMORY allows channels to skip up or down to the next channel set Press the MENU button. into memory, skipping over unwanted channels. 1 Before selecting channels, they must be programmed into MENU the TV's memory. In addition to normal VHF and UHF Press the SET + or – button until the 2 CH SET channels, this TV can receive up to 113 Cable TV channels. PICTURE indicator next to "CH SET" begins to A
Summary of the content on the page No. 9
SETTING V-CHIP This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls and restrictions. This function is to prevent your children from watching violence or sexual scenes that you may choose to exclude. Press the MENU button and press the SET + or – button to 1 TV RATING select the V-CHIP SET option, then press the ENTER button. SET – SET + Enter your password (4 digits) using the Direct channel OFF TV–Y TV-Y7 TV-G TV-PG TV-14 TV-MA 2 selection buttons
Summary of the content on the page No. 10
STEREO AND SEPARATE AUDIO PROGRAM (SAP) The TV is equipped with a feature known as Multi-channel TV LISTENING TO SAP (SEPARATE AUDIO PROGRAM) Sound or MTS. MTS broadcasts greatly enhance TV viewing When the TV is turned on or a channel selection is made, make by bringing you programs with high fidelity stereo sound. certain that the letters “SAP” appear on the screen. This means that the "Separate Audio Program" broadcasting is available. MTS also provides an extra channel called the Separate Au
Summary of the content on the page No. 11
TROUBLESHOOTING GUIDE Before requesting service, please refer to the following chart for the symptom and possible solution. SYMPTOMS POSSIBLE SOLUTIONS SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Check all CATV connections. TV does not • Try another AC outlet. No CATV • Set TV/CATV menu option to the CATV mode. operate • Power is off, check fuse or circuit breaker. reception • Station or CATV system problems, try • Unplug unit for an hour, then plug it back in. anothe
Summary of the content on the page No. 12
MEMO aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaa
Summary of the content on the page No. 13
MEMO aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaa
Summary of the content on the page No. 14
ESPAÑOL El símbolo del rayo dentro de un triángulo equilátero tiene por finalidad alertar al usuario acerca de la presencia de tensión peligrosa (sin aislación) en el interior del producto, que puede tener la intensidad suficiente como para constituir un riesgo de descarga eléctrica. PARA REDUCIR EL RIESGO DE DESCARGA AVISO: ELECTRICA, NO RETIRE LA CUBIERTA (O POS El signo de exclamación dentro de un triángulo equilátero tiene por TERIOR). EN EL INTERIOR DEL APARATO NO HAY COMPONENTES QUE REQUIE
Summary of the content on the page No. 15
13. TORMENTAS ELECTRICAS - Como medida de protección durante tormentas eléctricas, o cuando la unidad permanezca sin uso durante períodos prolongados de tiempo, desconéctelo del tomacorriente mural y desconecte la antena o sistema de cable. Esto evitará que la unidad resulte dañada por tormentas eléctricas o sobretensiones en la línea de alimentación. 14. LINEAS DE ALIMENTACION - Una antena exterior no deberá ser instalada en la cercanía de líneas de alimentación aéreas ni de otros circuitos de
Summary of the content on the page No. 16
POWER - SET + VOLUME MENU ENTER RESET CHANNEL CARACTERISTICAS • 181 canales de TV cable - El sistema de sintonización es capaz de recibir los 68 canales de VHF/UHF de emisión estándar disponibles en su área. Al ser usado con un sistema de TV cable, este sistema puede sintonizar las frecuencias de VHF estándar y 113 frecuencias de TV cable. El número real de canales recibidos dependerá de la recepción de canales en su área y del servicio de TV cable al que usted esté suscrito. • Ind
Summary of the content on the page No. 17
CONTROL REMOTO 4. Botón SLEEP - Para hacer que el televisor se apague después de un período de tiempo prefijado, presione el botón SLEEP del unidad de control remoto. La indicación POWER disminuirá en intervalos de 10 minutos cada vez que el botón 1 sea presionado (en el orden de 120, 110, 100, ... 20, 10, 0.). Una vez programado el tiempo de desactivación automática, 12 3 la indicación desaparecerá de la pantalla, después de lo cual volverá a aparecer momentáneamente cada diez minutos 45 6 para
Summary of the content on the page No. 18
CONEXIONES DE ANTENA Antena combinada de VHF/UHF Este televisor, puede sintonizar la mayoría de los canales por Cable solo de 75 ohmios cable sin necesidad de recurrir al convertidor suministrado por los canales de cable. Algunas 300 ohmios de conductores gemelos compañías de cable ofrecen "canales pagados premiados" en los cuales la señal esta Divisor Desmonte el divisor codificada. La decodificación de esas señales para la obtención de una señal normal, requiere Antenas de UHF Transformador d
Summary of the content on the page No. 19
CONEXIONES DE LA TOMA DE AUDIO / VIDEO (CONTINUACIÓN) 4. Para conectar el TV a un VCR con una toma S-VIDEO Si conecta un VCR con una toma S-video a la toma S-VIDEO de la parte posterior del TV, también debe conectar los cables de audio a las tomas AUDIO IN de la parte posterior del TV. El cable S-video sólo transporta la señal de vídeo. La señal de audio es independiente. Parte posterior del TV VCR OUT IN NOTA: Cuando el cable S-video y el cable de vídeo S-VIDEO estándar se conectan al mism
Summary of the content on the page No. 20
PARA MEMORIZAR CANALES Este televisor está equipado con una función de MEMORIA AUTOMATICA DE CANAL memorización de canales que permite avanzar o retroceder MENU Presione el botón MENU. 1 al siguiente canal almacenado en la memoria, pasando por CH SET PICTURE alto los canales no deseados. Presione el botón SET + ó – hasta que AUDIO 2 LANGUAGE Antes de seleccionar canales, éstos deberán estar el indicador "CH SET" empiece a V-CHIP SET 〈 + – 〉 programados en la memoria del televisor. Además
