Summary of the content on the page No. 1
MTV-34/51/68
U s e a n d C a r e M a n u a l
5368 MTV-34-68 CTV U&C Update.indd 1 12/9/2002, 4:42 PM
34/51cm - 68cm AV Stereo
Colour Television
Summary of the content on the page No. 2
QUICK START NB:- For connection of Television directly to Wall socket or indoor antenna Only. For connection to other equipment such as VCR etc refer to page 7. 1 Carefully Unpack your Magnavox television, ensuring the following items are present:- • Instruction Booklet 2 • Magnavox Hotline Number • Remote Control • AA size batteries for remote Control • Magnavox Product Flyer/Brochure • 75 Ohm antenna Lead 2 Carefully remove electrostatic sticker from television screen. 3 Read throug
Summary of the content on the page No. 3
SAFEGUARDS & SAFETY • This appliance is not intended for use in bathrooms, Important Safeguards laundry areas or similar moist locations. Never locate When using electrical appliances, in order to reduce this appliance in the immediate surroundings of, or the risk of fire, electric shock, and/or injury to persons, where it may fall into, a bath, basin, washtub, shower basic safety precautions should always be followed. or swimming pool. • Do not run the power cord under carpeting. Arrange
Summary of the content on the page No. 4
PRODUCT FEATURES Specifications Thank you very much for your purchase of this product. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. Installation Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Allow enough space between the receiver and the wall
Summary of the content on the page No. 5
CONTENTS QUICK START ....................................................2 SAFEGUARDS & SAFETY .....................................3 PRODUCT FEATURES...........................................4 CONTENTS .........................................................5 LOCATIONS OF CONTROLS ...................................6 OTHER EQUIPMENT ............................................7 BASIC OPERATION..............................................8 SPECS & DEFINITIONS .................................
Summary of the content on the page No. 6
LOCATIONS OF CONTROLS front panel MAIN POWER ON/OFF SWITCH INFRA-RED RECEIVING WINDOW STAND-BY MODE INDICATOR MTV51/ MTV 34 MTV68 FRONT AUDIO INPUT TV/AV SELECT VOLUME DOWN PROGRAM UP FRONT VIDEO INPUT MENU SELECT VOLUME UP PROGRAM DOWN back panel VIDEO OUT VIDEO IN MTV68 AUDIO IN AUDIO OUT AUDIO OUT AUDIO IN MTV34/ MTV51 AERIAL TERMINAL VIDEO IN VIDEO OUT 6 5368 MTV-34-68 CTV U&C Update.indd 6 12/9/2002, 4:42 PM
Summary of the content on the page No. 7
Introduction OTHER EQUIPMENT CONNECTION TO OTHER EQUIPMENT This TV set can be connected to video cassette recorder, video disc player, video camera, game player or audio player. VIDEO CASSETTE RECORDER (RED) (WHITE) (YELLOW) MTV68 MTV34/ MTV51 NOTE: Video/ Audio equipment can be connected to sockets of AUDIO IN or VIDEO IN in rear. VIDEO CASSETTE RECORDER (RED) MTV68 MTV34/ MTV51 (WHITE) (YELLOW) 7 5368 MTV-34-68 CTV U&C Update.indd 7 12/9/2002, 4:42 PM
Summary of the content on the page No. 8
BASIC OPERATION DESCRIPTION OF OPERATION You can press the buttons on the remote control or the menu button on the TV set to adjust the picture, clock, preset, system and audio (68cm only) according to the menu shown on the screen. SYSTEM PICTURE AUDIO (MTV-68 ONLY) bright 45 volume 32 colour-sys auto contrast 63 balance 00 sound-sys 5.5m colour 63 coring on sharp 63 tint 63 ---------+----- ---------+----- PRESET CLOCK pos. 0 time 16:00 rem. on on-time --:-- band v-l off-time --:-- fine promp
Summary of the content on the page No. 9
Basic Operation Introduction Preset menu operation channel position 1. Press the ‘PRE’ button on the remote control to 5. Press the ‘PRE’ button to select the SEMI-SEARCH select the ‘PRESET’ page. Every 10 seconds the line and then press the ‘VOL ’ or ‘VOL ’ button present menu will flick off the screen. Continue to until the desired television station reception press the ‘pre’ button to re-instate the menu. is found. If a station is found that is not the desired station p
Summary of the content on the page No. 10
Basic Operation CLOCK MENU OPERATION Press the MENU button on the set four times or the CLOCK button on the remote control to display the clock menu. CLOCK time 16:00 on-time --:-- off-time --:-- prompt --:-- ch-time 16:25 pos. 10 24 hour clock setting (The clock must be set before you select the other items) 1. Press ‘P /P ’ button to select TIME item. 2. Press ‘VOL ’ button to set the hour. Press ‘VOL ’ button to set the minute. NB: If you turn off the set at the wall or on the set itself you
Summary of the content on the page No. 11
Basic Operation Basic Operation Picture menu operation PICTURE bright 45 1. Press PRE button on the remote control to display contrast 63 the picture menu. colour 63 sharp 63 2. Press ‘P /P ’ button to select the item. tint 63 3. Press ‘VOL /VOL ’ button to select the channel up ---------+----- or down. BRIGHT CONTRAST COLOUR SHARP TINT NTSC ONLY SYSTEM MENU OPERATION SYSTEM colour-sys auto Press SYS button on the remote control to display the
Summary of the content on the page No. 12
CHANNEL SELECTION 1. Power Button 3. CHANNEL SELECTION Press POWER button on the TV set to turn it on. 1. When the channel number has one figure, press the number directly. 2. When the channel number has two figures, press ‘ -- ’ button at first. For example, press ‘ -- ’ and then press ‘2’ and ‘5’ to select channel 25. If the TV set is under stand-by mode when you press the 3. When the channel number has three figures, press POWER button on the TV, turn it on by pressing POWER ‘ --
Summary of the content on the page No. 13
Basic Operation 5. channel button 8. SLEEP BUTTON Press ‘P /P ’ button on the remote control until you You can select from 0 to 120 minutes, after which the get the channel you want. TV will change to stand-by mode automatically. P Each time you press the button, - prog + the display changes as follows: -- 120 105 90 75 CTV Set 15 30 45 60 9. PICTURE MODE SELECTION 6. TV/AV BUTTON Press TV/AV button to select TV or AV1 or AV2. PP tv/av TV/AV Press ‘PP’ button. The display changes a
Summary of the content on the page No. 14
SPECS & DEFINITIONS NOTE 230~240v AC 50HZ power SHOWN ON BACK OF THE TV SET power consumption B/G sound-system PAL, NTSC colour-system 75 ohm antenna INPUT: 2, OUTPUT: 1 Phono: 1VP 75 ohm video contact INPUT: 2, OUTPUT: 1 Phono: 500mVrms audio contact INPUT: 1 Y: 1Vp; P:75 ohm s-video contact C: 0. 28Vp; P:75 ohm (MTV68 Only) 34cm ~ 68cm pic. tube meas. VL: 1~5 channel VH: 6~12 (255 channels) UHF: 13~57 (34cm) : > 1W sound output power (51cm) : > 2W (68cm) : > 4W Part of the design and the speci
Summary of the content on the page No. 15
Introduction NOTES 15 5368 MTV-34-68 CTV U&C Update.indd 15 12/9/2002, 4:42 PM
Summary of the content on the page No. 16
WARRANTY The benefits conferred by this warranty are in addition DO NOT SEND IN THIS WARRANTY to all implied warranties, other rights and remedies in Fill out the following details and file with your purchase respect of the product which the consumer has under invoice. the Trade Practices Act and similar State and Territory Laws. RETAIN & FILE WITH YOUR RECEIPT The original purchaser of this MAGNAVOX product is provided with the following warranty, subject to the Your Purchase Receipt/ Inv
