Summary of the content on the page No. 1
Color Television Users Guide
For Models:
AV-27F734
AV-32F734
Illustration of AV-32F734 and RM-C1251G
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user's guide in a convenient place for future reference. Keep the carton and
original packaging for future use.
Model Number:
LCT1506-001A-A
Serial Number:
0803-KG-II-IM
73
Summary of the content on the page No. 2
Important Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric sh
Summary of the content on the page No. 3
® • As an “ENERGY STAR ” partner, JVC has determined that this product or product model meets the “ENERGY ® STAR ” guidelines for energy efficiency. Important Safeguards CAUTION: Please read and retain for your safety. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set,
Summary of the content on the page No. 4
7 An outside antenna system ANTENNA LEAD IN should not be located in the WIRE vicinity of overhead power GROUND lines or other electric light CLAMP or power circuits, or where it can fall into such power lines ANTENNA DISCHARGE UNIT or circuits. When installing (NEC SECTION 810-20) an outside antenna system, ELECTRICAL extreme care should be taken SERVICE GROUNDING CONDUCTORS EQUIPMENT to keep from touching such (NEC SECTION 810-21) power lines or circuits as GROUND CLAMPS contact wi
Summary of the content on the page No. 5
PORTABLE CART WARNING (Symbol provided by RETAC) 13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges. 14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn.
Summary of the content on the page No. 6
Table of Contents Quick Setup . . . . . . . . . . . 7 Button Functions . . . . . . . 40 Unpacking your TV . . . . . . . . . . . . 7 Power . . . . . . . . . . . . . . . . . . 40 TV Models . . . . . . . . . . . . . . . . 8 Number Buttons . . . . . . . . . . . . . 40 TV Remote Control . . . . . . . . . . . 9 100+ Button . . . . . . . . . . . . . . . 40 Getting Started . . . . . .
Summary of the content on the page No. 7
AA Alkaline AA Alkaline Quick Setup Unpacking Your TV Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include: Two AA 1 Television 1 Remote Control Batteries TV CATV VCR DVD POWER TM INPUT DISPLAY 1 2 3 SLEEP TIMER 4 5 6 SOUND 7 8 9 VIDEO STATUS 100+ RETURN+ 0 THEATER PRO ASPECT LIGHT MUTING C.C. CH +
Summary of the content on the page No. 8
Quick Setup TV Models NOTE: Before you connect your television to another device, please refer to the proper diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television. Rear Panel Diagrams MODELS: AUDIO VIDEO S VIDEO AV-27F734 R L MONO OVER AV-32F734 INPUT 1 INPUT 2 COMPONENT VIDEO 75Ω (VHF / UHF) Y L R PB AUDIO OUT AV COMPU
Summary of the content on the page No. 9
Quick Setup TV Remote Control TV CATV VCR DVD POWER INPUT DISPLAY 1 2 3 SLEEP TIMER 4 5 6 SOUND 7 8 9 RETURN+ VIDEO STATUS 100+ 0 THEATER PRO ASPECT LIGHT MUTING C.C. CH + VOL VOL – + CH – MENU EXIT VCR CHANNEL VCR/DVD TV/VCR PREV NEXT POWER REW PLAY FF REC STOP PAUSE OPEN/CLOSE STILL/PAUSE RM-C1251G TV RM-C1251G MODELS: AV-27F734 AV-32F734 • For information on remote control buttons, see pages 40 - 45. 9 734 English 9 8/27/03, 10:58:51 AM
Summary of the content on the page No. 10
Quick Setup Getting Started Getting Started These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual. Step 1 – The Remote Control Before you can operate your remote control, you first need to install the batteries (included). Lift and pull the latch on the ba
Summary of the content on the page No. 11
Quick Setup Connections Basic Operation Turn the television on and off by pressing the POWER button at the top right POWER corner of the remote. If this is the first time you are turning on the TV, the interactive plug-in menu appears. • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. TV CATV • Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to DVD to control a DVD player. Please s
Summary of the content on the page No. 12
Quick Setup Connections Diagram #1 Illustration of AV-32F734 TV Rear Panel Cable or Antenna AUDIO VIDEO S VIDEO R L MONO OVER Output INPUT 1 INPUT 2 COMPONENT VIDEO Coaxial Cable 75Ω (VHF / UHF) R L Y OR PB AUDIO OUT AV COMPULINK PR OUT IN Cable Box Note: • If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV. Diagram #2 Illustration of AV-32F734 Cable or Antenna TV Rear Panel Output AUDIO VIDEO S VIDEO R L
Summary of the content on the page No. 13
Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables. • If you use INPUT 2 (Component-In), for a DVD conn
Summary of the content on the page No. 14
Quick Setup Connections Connecting to a Camcorder You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 3) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions. Illustration of AV-32F734 INPUT 3 CHANNEL VOLUME MENU OPERATE VIDEO L MONO AUDIO R Camcorder 1) Connect a yellow co
Summary of the content on the page No. 15
Quick Setup Connections Connecting to JVC AV Compu Link JVC’s AV compu link feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV compu link, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input. • Th
Summary of the content on the page No. 16
Quick Setup Plug-In Menu Step 3 – The Interactive Plug In Menu When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear. • Setting the TV’s clock to the correct time so your timer functions will work properly. You can choose “AUTO” or “MANUAL” for setting the clock. •
Summary of the content on the page No. 17
Quick Setup Plug-In Menu Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal: √® To choose AUTO INTERACTIVE PLUG IN MENU > SET CLOCK † To TIME ZONE MODE AUTO √® To select yo
Summary of the content on the page No. 18
Quick Setup Plug-In Menu Auto Tuner Setup In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels. √ ® T o choose CABLE or AIR (or SKIP when you INTERACTIVE PLUG IN MENU > AUTO TUNER SETUP skip Auto Tuner Setup) † To START TUNER MODE CABLE NOW STA
Summary of the content on the page No. 19
Remote Programming Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer. Cable Box or Satellite Codes The remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key
Summary of the content on the page No. 20
Remote Programming VCR Codes The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad. 4) Release the DISPLAY button, and confirm the operation of the
