Summary of the content on the page No. 1
Contents
Safety precautions 2
Preparation 2
..
1 Insert the batteries into the remote control 2
COLOUR TELEVISION
......................
2 Connecting the aerial and VCR 3
...............................
3 Connecting other devices 4
......
4 Connect the power cord to the AC outlet 4
INSTRUCTIONS
...................................................
5 SETUP TOUR 5
Thank you for buying this JVC
Basic operation 6
colour television.
Remote control buttons and functions 7
To make sure you understand how
Summary of the content on the page No. 2
Safety precautions WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. •Operate only from the power source specified on the TV. •Avoid damaging the power cord and main plug. When you unplug the TV, pull it out by the main plug. Do not pull on the power cord. 15 cm •Never block or cover the cabinet opening for ventilation. Never install the TV where good ventilation
Summary of the content on the page No. 3
Preparation 2 Connecting the aerial and VCR •Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. •Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack. •You can connect an S-VIDEO compatible device (such as an S-VHS VCR) to the S-connector with an S-VID
Summary of the content on the page No. 4
Preparation 3 Connecting other devices If you are not connecting any other devices, skip step 3 and perform step 4. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it cannot output any
Summary of the content on the page No. 5
Preparation 5 SETUP TOUR When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. • In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET function on the “MENU 3” menu. For details, see page 19. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting m
Summary of the content on the page No. 6
Basic operation Your remote control may not look 1 Press the POWER button to exactly like the illustration. turn your TV on. • If your TV does not turn on, press the Main power button on the TV then press the POWER button again. •You can also turn on your TV by pressing any of the following buttons; PICTURE MUTING BASS BOOSTER POWER - the CHANNEL m button SYSTEM CINEMA - the Number buttons COLOUR SOUND SURROUND PIP - the TV/VIDEO button ECO DISPLAY SENSOR 2 Select a channel. ■ Press the CHANNE
Summary of the content on the page No. 7
Remote control buttons and functions Cross Reference table for TV set and Remote Control AV-21VS21 AV-21WS21 AV-21VX71 AV-21WX11 Refer to TV set AV-25VS21 AV-25VX71 AV-21YX11 AV-29WX11 page no. AV-29VS21 AV-29VX71 AV-29WS21 REMOTE CONTROL RM-C1301 RM-C1302 RM-C1306 RM-C1310 MUTING ‡‡‡‡ 8 ‡ 8 PICTURE BOOSTER – – – ‡‡‡‡ 8 COLOUR SYSTEM SOUND SYSTEM ‡‡‡‡ 8 ‡‡‡‡ 8 CINEMA SURROUND DISPLAY ‡‡‡‡ 9 ‡‡‡‡ ECO SENSOR 9 ‡ Ι/ΙΙ ––– 9 TV/VIDEO ‡‡‡‡ 6 ‡‡‡‡ OFF TIMER 9 PICTUR
Summary of the content on the page No. 8
Remote control buttons and functions MUTING button SOUND SYSTEM button You can turn the sound off instantly. If the sound is not clear even when the picture appears normal, change the Press this button. current sound system to another sound To turn the sound on, press this button system. again. Press this button to select the sound system. PICTURE BOOSTER button I B/G D/K M •For the sound systems in each country or When the picture is unclear because the region, see the table “B
Summary of the content on the page No. 9
Remote control buttons and functions DISPLAY button button You can continuously display the current channel number or VIDEO mode on the You can select a sound setting for stereo screen. broadcast programmes and bilingual Press this button. programmes. To turn the display off, press this button Press this button to select a sound again. setting. • When selecting a VIDEO mode with no : Stereo sound signal, indication of the VIDEO mode : Bilingual I (sub I) sound becomes fixed on th
Summary of the content on the page No. 10
Remote control buttons and functions • When MENU is displayed, FAVORITE CH PICTURE MODE button cannot be correlated. You can select one of three picture • Correlation of FAVORITE CH button and the adjustment settings as you like. channel cannot be reset eventhough the main power is turned off. Press this button to select a mode. BRIGHT: RETURN + button Heightens contrast and sharpness. You can set a channel you frequently view STANDARD: to the Return Channel and you can view Standardizes pictur
Summary of the content on the page No. 11
Remote control buttons and functions PIP button SWAP ( ) button You can display sub-picture on top of You can swap the input source of main main-picture. and sub-pictures by this button while sub-piture is displayed. Press this button to display sub- picture. Press this button to swap the input source of main and sub-pictures so that • When PIP button is pressed while sub-picture the image of sub-picture is displayed is displayed, sub-picture is closed. on main-picture and vice-versa. • When TV
Summary of the content on the page No. 12
Remote control buttons and functions C.SYS button If the sub-picture is not clear or no colour appears, change the current colour system to another colour system. •Press this button to select the colour system. SUB AUTO SUB PAL SUB SECAM SUB NTSC4.43 SUB NTSC3.58 • About each selected mode, see “COLOUR SYSTEM button” on page 8. • When the input of sub-picture is changed to VIDEO mode, the colour system of sub-picture is automatically set to AUTO mode. • When the input of sub-picture is TV mode
Summary of the content on the page No. 13
Viewing teletext programmes Using the List Mode You can store the numbers of your TIMER 456 favorite teletext pages in the List mode PICTURE MODE and call them up quickly using the 789 CHANNEL coloured buttons. RETURN+ SCAN - -- 0 / CHANNEL VOLUME To store the page numbers: FAVORITE CH 1 Press the MODE button to engage Coloured 5 buttons the List mode. 5 5 + i SUB – ? SUB 5 REVEAL SIZE The stored page numbers are HOLD INDEX C.SYS MODE displayed at the bottom of the screen. SUBPAGE CANCEL S
Summary of the content on the page No. 14
Viewing teletext programmes i REVEAL ( ? ) INDEX ( ) Some teletext pages include hidden text You can return to the index page instantly. (such as answers to a quiz). Press the INDEX button. You can display the hidden text. In the List mode: Each time you press the REVEAL Returns to the page number displayed in button, text is hidden or revealed. the lower left area of the screen. 5 HOLD ( 5 ) SUBPAGE ( ) You can hold a teletext page on the screen Some teletext pages include sub-pages for as lo
Summary of the content on the page No. 15
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 4 Press the CHANNEL –/+ or the MENU / buttons to change SYSTEM CINEMA PIP COLOUR SOUND SURROUND function settings. ECO DISPLAY DISPLAY SENSOR button Example: Changes the AUTO MENU t MENU SHUTOFF setting. / buttons MENU buttons Ι/ΙΙ TV/TEXT TV/VIDEO MENU 2 MENU 2 AUTO SHUTOFF
Summary of the content on the page No. 16
Using the TV’s menus INPUT VNR You can view images from VCRs or other You can reduce picture noise. devices connected to your TV. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 1” menu, then select “MENU 1” menu, then select “VNR”. “INPUT”. MENU 1 INPUT TV MENU 1 VNR ON INPUT TV COMPRESS(16:9) ON VNR ON PICTURE TILT 00 COMPRESS(16:9) ON PICTURE TILT
Summary of the content on the page No. 17
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no If no signal is being received or the signal signals are received for about 15 minutes is very weak, a blue back screen or longer after the end of a broadcast. automatically becomes the picture background. 1 Press MENU T to display the If you wish to contunue viewing the poor “MENU 2” menu, then select picture, you must set the BLUE BACK “AUTO SHUTOFF”. function to “OFF” MENU 2 AUTO SHUTOFF
Summary of the content on the page No. 18
Using the TV’s menus VIDEO-2 SET Picture Adjustments Set the VIDEO-2 SET correctly according You can adjust the picture as you like. to the video signal input from the external 1 Press MENU T to display the device connected to the VIDEO-2 “MENU 4” menu. terminal. If this setting is incorrect, images will not be displayed. MENU 4 TINT COLOUR 1 Press MENU T to display the BRIGHT CONT “MENU 2” menu, then select SHARP “VIDEO-2 SET”. SELECT BY EXIT BY OPERATE BY -+ DISPLAY
Summary of the content on the page No. 19
Using the TV’s menus AI VOLUME AUTO CH PRESET You can prevent the sudden increase or You can automatically preset all TV decrease of volume that occurs when channels that can be received by your TV changing channels or switching VIDEO to channels. modes. 1 Press MENU T to display the 1 Press MENU T to display the “MENU 3” menu, then select “MENU 5” menu, then select “AUTO CH PRESET”. “AI VOLUME”. MENU 3 AUTO CH PRESET MENU 5 MANUAL CH PRESET BASS SE
Summary of the content on the page No. 20
Using the TV’s menus If the picture is not clear: MANUAL CH PRESET Fine-tune the TV channel. You can manually preset desired TV channels to desired channels. 1 Press MENU t to select “FINE”. MANUAL 1 Press MENU T to display the FINE “MENU 3” menu, then select SKIP NO SOUND SYSTEM B/G “MANUAL CH PRESET”. EXIT MENU 3 SELECT BY PR 1 VL AUTO CH PRESET PROGRAM BY -+ EXIT BY MANUAL CH PRESET FINE BY VOL-+ DISPLAY SETUP TOUR
