Summary of the content on the page No. 1
MULTIMEDIA PROJECTOR
MODEL LC-XT1
OWNER’S INSTRUCTION MANUAL
Summary of the content on the page No. 2
LC-XT1 TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read
Summary of the content on the page No. 3
LC-XT1 SAFETY PRECAUTIONS All the safety and operating instructions should be read cabinet slots as they may touch dangerous voltage points or before the product is operated. short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector. Read all of the instructions given here and retain them for This projector should be operated only from the type of power later use. Unplug this projector from AC power supply before source indicated
Summary of the content on the page No. 4
LC-XT1 COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cau
Summary of the content on the page No. 5
LC-XT1 TABLE OF CONTENTS SOUND ADJUSTMENT 25 FEATURES AND DESIGN 6 DIRECT OPERATION 25 MENU OPERATION 26 SELECTING INPUT SOURCE 26 DIRECT OPERATION 26 PREPARATION 7 MENU OPERATION 26 NAME OF EACH PART OF THE PROJECTOR 7 SETTING-UP THE PROJECTOR 8 CONNECTING THE AC POWER CORD 8 COMPUTER MODE 27 LENS INSTALLATION 9 SELECTING COMPUTER SYSTEM 27 POSITIONING THE PROJECTOR 9 COMPATIBLE COMPUTER SPECIFICATIONS 29 LENS SHIFT ADJUSTMENT 9 PC ADJUSTMENT 30 PICTURE LEVE
Summary of the content on the page No. 6
LC-XT1 FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. • Motor-driven Lens Shift • Compatibility The projection lens can be moved up, down, left and right with the motor-driven lens shift function. This function This projector widely accepts various video a
Summary of the content on the page No. 7
LC-XT1 .
Summary of the content on the page No. 8
LC-XT1 This projector uses nominal input voltages of 100-120 V or 200-240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect the projector with the peripheral equipment befor
Summary of the content on the page No. 9
LC-XT1 Before setting up the projector, install the Projection Lens on the Projector. 1.Before installation, check where the projector is used and prepare suitable lens. For specifications of the Projection Lens, refer to the manual separately attached or contact the sales dealer where you purchased the projector. 2. For installation, refer to the installation manual supplied to the Projector. .
Summary of the content on the page No. 10
LC-XT1 .
Summary of the content on the page No. 11
LC-XT1 This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal Boards. For Terminal Boards, contact the sales dealer where you purchased the projector. 1 Remove 2 Screws on the terminal. 2 Pull out the terminal by holding the handle. 3 Replace the terminal. Insert the ter
Summary of the content on the page No. 12
LC-XT1 .
Summary of the content on the page No. 13
LC-XT1 .
Summary of the content on the page No. 14
LC-XT1 .
Summary of the content on the page No. 15
LC-XT1 .
Summary of the content on the page No. 16
LC-XT1 .
Summary of the content on the page No. 17
LC-XT1 .
Summary of the content on the page No. 18
LC-XT1 .
Summary of the content on the page No. 19
LC-XT1 .
Summary of the content on the page No. 20
LC-XT1 .
