Summary of the content on the page No. 1
B4100528 / 03
November2005
MFCD 1219 - MFCD 1219 TS
Installation & User Manual
Summary of the content on the page No. 2
SAFETY INSTRUCTIONS Adapter manufacturer: Linearity Electronics Co. Ltd., Model: LAD6019AB5, complies with UL Certified Class 2 Power adapter or UL Certified ITE Power adapter with LPS, and Suitable ratings. • Read the safety and the user will be required to Power Supply Cord - Listed, operating instructions before correct the interference at Detachable, maximum 4.5m operating the apparatus. his own expense. (14.76 ft.) long; rated Retain safety and operating minimum 125 V, 2.5 A, Type ins
Summary of the content on the page No. 3
CONTENTS 1. Overview ....................................................................................................... 5 1.1 Introduction ............................................................................................. 5 Multi-scan capabilities ............................................................................... 5 Touch panel ............................................................................................... 6 1.2 Package contents .......................
Summary of the content on the page No. 4
1. OVERVIEW 1.1 Introduction The MFCD 1219 (TS), BARCO’s full color 19” LCD display, guarantees perfect image quality in medical imaging applications. The display combines a TFT (thin film transistor) liquid crystal display panel structure and a built-in backlight with inverter for a better picture quality. It is designed to meet users' needs for performance, consistency, and outstanding image quality through a streamlined development process in which wall-mount functionality provides a variety
Summary of the content on the page No. 5
The monitor comes with a power saving feature; Power Saving therefore, you may put the monitor into a power saving state when it is not in use. This feature complies with both EPA‘s Energy Star requirements and European NUTEK/TCO’s power management guidelines. It conforms to Video Electronics Standard Association (VESA) approved DPMS power-down signaling method. This monitor automatically cuts down power consumption of monitor set when not detecting Hsync or Vsync signals. This feature is compli
Summary of the content on the page No. 6
1.3 Controls and connectors (10) (1) (2) (3) (4) (5) (6) (7) (8) (9) (1) 12V DC power input (2) Analog video input (3) DVI input (DVI-D supported only) (4) USB port for touch panel connection to PC (MFCD 1219 TS only) (5) Menu key (6) <-> Key (7) <+> Key (8) Power LED The LED is off when the display is off. The LED is green when the display is on. The LED is orange when the display is in power-saving mode (stand-by) (9) Power key (10) Push-button to release the panel from the foot MFCD 1219 (TS)
Summary of the content on the page No. 7
2. INSTALLATION 2.1 Precautions Keep your original packaging. It is designed for this display and is the ideal protection during transport. Avoid reflections in the flat panel to reduce eye strain. Place the display on a strong and stable table or desk. Keep the display away from heat sources and provide enough ventilation in case it is built in a rack or console. Do not put in direct sunlight. Make sure computer and display are switched off before connecting the signals. Touch panel
Summary of the content on the page No. 8
A 2 Slide back the locks at both sides of the mounting plate (B). In that way, you can secure the panel to the mounting plate after placing the panel. B Step 3: Place the panel on the mounting plate 1 Place the panel on the mounting plate (C). If you want to secure the panel to the mounting plate, place the panel in the frontmost notches. Please make sure that the four shafts are securely placed in the notches of the mounting plate. C MFCD 1219 (TS) User's Guide 9
Summary of the content on the page No. 9
2 To secure the panel, slide forward the locks on both sides of the mounting plate. Lock the panel with one screw at both sides (D). D 2.3 Connecting the signals To connect the video & sync signals: 1 Connect one end of the appropriate video cable to the corresponding video input of the monitor. Analog video: Connect to input (2) DVI: Connect to input (3) 2 Connect the other end of the video cable to the video output of your video source. Analog video: Computer graphics board with analog video o
Summary of the content on the page No. 10
2.4 Starting up Proceed as follows: 1 Switch on the computer. 2 Switch on the display by pushing the Power key (8). 3 If necessary, select a suitable resolution in the computer operating system. Please refer to Appendix A, "Possible resolutions" in the back of this manual. Note: The recommended resolution for best image quality is 1280x1024 at 60 Hz. The microcontroller in the display checks if the (8) connected video signal has been adjusted before, and if these adjustments have been stored in
Summary of the content on the page No. 11
3. ON-SCREEN DISPLAY (OSD) MENUS 3.1 How to use the OSD Proceed as follows: 1 Press the Menu key (4) on the front to display the OSD main menu. Note: It may be possible that the OSD menu does not appear. If this is the case, the front Controls are locked. To unlock them, please follow the procedure described in § 3.2 below. 2 Press the <+> key (6) or <-> key (5) to scroll to the desired menu item. 3 Press the Menu key (4) to activate the selected function or to enter the selected (4) (5) (6) sec
Summary of the content on the page No. 12
3.2 Description of the menu items Main menu Function Description Brightness To adjust the overall image and background brightness level. Contrast To adjust the image brightness in relation to the background (the background is unchanged). Auto Adjust * To automatically set the H Position, V Position and Clock. Horizontal Position To move the screen horizontally left or right. Vertical Position To move the screen vertically upward or downward. Color To adjust parameters for the screen colors of Re
Summary of the content on the page No. 13
**To unlock the Controls, proceed as follows: 1 Press the Power key to switch off the display 2 With one hand, press and hold the <+> and the <-> key at the same time. With the other hand, press the Power key shortly to switch the display on again. 3 Keep holding the <+> and the <-> key for about 3 seconds. 4 At last, release the <+> and the <-> key. Now, by pressing the Menu key, the OSD menu will appear. Note: The bottom line of the OSD shows the input type, current resolution of the monitor a
Summary of the content on the page No. 14
To perform the Autobalance function, you need to select a proper test pattern before performing the function. Proceed as follows: 1 You must have installed the Barco NioWatch software. 2 Right-click on the NioWatch systray icon. 3 Select Test Patterns from the pop-up menu. 4 Select the SMPTE test pattern. 5 Now perform the function Autobalance from the MFCD 1219 (TS) control panel. 6 When finished, click on the test pattern to close it. Clock Menu Function Description Clock Menu - (Down) + (Up)
Summary of the content on the page No. 15
4. MAINTENANCE Panel Take care not to damage or scratch the panel. Clean with a soft woolen or cotton towel. Use a watery solution or a mild commercial glass cleaning solution. Cabinet Do not use chemical cleaning products, benzene, toluene, xylene or other solvents. Clean with a soft cloth dampened with mild detergent and water. Repeat this with water only and wipe dry with a dry cloth. Touch panel (Only for MFCD 1219 TS) Use a clean and soft clothe with neutral detergent or with ethanol for cl
Summary of the content on the page No. 16
APPENDIX A: POSSIBLE RESOLUTIONS There are 22 preset modes and 2 user modes. The following modes are preset as factory defaults. Resolution Pixel Horizontal Vertical Standard Analog Digital Freq. (MHz) Freq. (kHz) Freq. (Hz) 640 x 350 25.175 31.47 70 VGA V V 640 x 480 25.175 31.47 60 VGA/VESA V V 30.24 35.00 67 Mac V 31.50 37.90 7 2 VESA V 31.50 37.50 7 5 VESA V 36.00 43.30 8 3 VESA V 720 x 400 28.321 31.47 70 VGA V V 800 x 600 36.00 35.10 5 6 VESA V 40.00 37.88 6 0 VESA V V 50.00 48.10 7 2 VESA
Summary of the content on the page No. 17
APPENDIX B: TECHNICAL SPECIFICATIONS Picture panel Input signals 19-inch diagonal viewable screen Analog: Hor. 31.47 to 91.2 kHz TFT (thin film transistor) active matrix, Vert. 56 to 85 Hz color liquid crystal display, RGB Sync types: Separate sync, interface composite sync, sync on Green Touch panel (MFCD 1219 TS only) Digital: Hor. 31.47 to 64 kHz Resistive technology Vert. 60 to 70 Hz Interface: USB 1.1 Input mode: stylus or finger Touch active force (stylus ∅ 0.8 mm): Max. video input bandwi
Summary of the content on the page No. 18
PnP compatibility NOTICE: VESA DDC 2B standards compliant DUE TO OUR POLICY OF CONTINUOUS PRODUCT IMPROVEMENT, THE ABOVE Safety standards SPECIFICATIONS ARE SUBJECTED UL60950, cUL60950, IEC60950, CE, TO CHANGE WITHOUT NOTICE. CCC BARCO SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL Dimensions (W x H x D) ERRORS OR OMISSIONS 450 mm x 461.8 mm x 213.9 mm CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL Net weight DAMAGES WHATSOEVER 7.7 kg RESULTING FROM FURNISHING, MFCD 1219 TS: 8.3 kg PERFOR
Summary of the content on the page No. 19
