Summary of the content on the page No. 1
AA68-03871A-00Eng 7/18/06 6:07 PM Page 1
TX-S3064WR
TX-S3065WR
COLOR TELEVISION
Owner’s
Instructions
Register your product at www.samsung.com/global/register
Summary of the content on the page No. 2
AA68-03871A-00Eng 7/18/06 6:07 PM Page 2 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), shoul
Summary of the content on the page No. 3
AA68-03871A-00Eng 7/18/06 6:07 PM Page 3 Contents GENERAL INFORMATION CHANNEL CONTROL List of Features .................................................................................. 4 Adding and Erasing Channels...................................................... 23 Accessories........................................................................................ 4 Labeling Channels ....................................................................... 24 Viewing the Control Panel....
Summary of the content on the page No. 4
AA68-03871A-00Eng 7/18/06 6:07 PM Page 4 General Information List of Features Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. Aspecial sleep timer. V-Chip function. SRS TruSurround XT - SRS TruSurround XT provides a virtual Dolby surround system. Accessories Please make sure the following items are included with your TV. If any items are missing, contact your dealer. Remote Control Owner’s Instructions / Warranty Cards /
Summary of the content on the page No. 5
AA68-03871A-00Eng 7/18/06 6:07 PM Page 5 Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model. TX-S3064WR TX-S3065WR 1 SOURCE 4 CH Toggles between all the available input sources Press to change channels. (TV, AV1, AV2, AV3/S-Video, Component1, In
Summary of the content on the page No. 6
AA68-03871A-00Eng 7/18/06 6:07 PM Page 6 Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 8-13. 12 1 AV IN 1, 2 4 HDMI IN Connect to the video output jacks of VCRs, DVD Connect to the HDMI jack of a device with an HDMI players and similar devices. output. 2 AV OUT 5 ANT IN Connect to the audio/video input jacks of a recordi
Summary of the content on the page No. 7
AA68-03871A-00Eng 7/18/06 6:07 PM Page 7 Remote Control You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it directly at the TV You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box. 1 POWER # SOURCE Turns the TV on and off. Press to display all of the available video sources. 2 NUMERIC BUTTONS Press to change the channel. $ INFO Press to display information on the TV 3 – screen.
Summary of the content on the page No. 8
AA68-03871A-00Eng 7/18/06 6:07 PM Page 8 Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. ➢ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from
Summary of the content on the page No. 9
AA68-03871A-00Eng 7/18/06 6:07 PM Page 9 Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1. Plug the incoming cable into the ANT IN terminal on the back of the TV. ANT IN ➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box. ➢ This terminal might be labele
Summary of the content on the page No. 10
AA68-03871A-00Eng 7/18/06 6:07 PM Page 10 Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 8-9). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or ANT IN antenna from the back of the TV. 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. TV Rear Panel 3. Connect an Antenna Cable between the ANT 12 OUT terminal
Summary of the content on the page No. 11
AA68-03871A-00Eng 7/18/06 6:07 PM Page 11 Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1. To begin, follow steps TV Rear Panel 1–3 in the previous section to connect the antenna or cable to your 12 VCR and your TV. VCR Rear Panel 2. Connect a video cable between the AV OUT [VIDEO] jack on the TV and the VIDEO IN jack on the VCR. Refer to your VCR’s instruction
Summary of the content on the page No. 12
AA68-03871A-00Eng 7/18/06 6:07 PM Page 12 Connecting a DVD Player/Set-Top Box The rear panel jacks on your TV make it easy to connect a DVD player/Set-Top Box to your TV. 1. Connect a Component TV Rear Panel Cable between the COMPONENT IN 1 [Y, PB, DVD Player/Set-Top Box 12 PR](or COMPONENT IN 2 [Y, PB, PR]) jacks on the TV and the COMPONENT Y, PB, PR jacks on the DVD Player/Set-Top Box. 2. Connect Audio Cables between the COMPONENT IN 1 [L-AUDIO-R](or 2 Audio Cable (Not supplied) COMPONENT
Summary of the content on the page No. 13
AA68-03871A-00Eng 7/18/06 6:07 PM Page 13 Connecting an Amplifier/DVD Home Theater 1. Connect Audio Cables TV Rear Panel between the AV OUT [L-AUDIO-R] on the TV Amplifier/DVD Home Theater and AUDIO IN on the 12 Amplifier/DVD Home Theater. When an audio amplifier is connected to the “AUDIO OUT [L-AUDIO- R]” terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Audio Cable (Not supplied) Amplifier’s volume control. ➢ Each external input source device has a diffe
Summary of the content on the page No. 14
AA68-03871A-00Eng 7/18/06 6:07 PM Page 14 4. Press the ENTER button to select “Start”. Search The TV will begin memorizing all of the available channels. Air 31 Press the ENTER button to stop. After all the available channels are stored, the “Clock Set” menu appears. Stop ➢ Refer to “Memorizing the Channels” on page 16. Enter Skip 5. Press the œ œ or √ √ button to move to the Hour, Minute or am/pm. TV Clock Set Set these by pressing the … or † button. ➢ Refer to “Setting the Time” on page
Summary of the content on the page No. 15
AA68-03871A-00Eng 7/18/06 6:07 PM Page 15 Using the “-” Button 1. To select a channel over 100, for channel 122, press “-”, then “2”, then “2”. Using the PRE-CH Button to select the Previous Channel 1. Press the PRE-CH button. The TV will switch to the last channel viewed. ➢ To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them. Adjusting the Volume 1
Summary of the content on the page No. 16
AA68-03871A-00Eng 7/18/06 6:07 PM Page 16 Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channel
Summary of the content on the page No. 17
AA68-03871A-00Eng 7/18/06 6:07 PM Page 17 To Select the Source Use to select TV or other external input sources connected to the TV. Use to select the input source of your choice. 1. Press the MENU button to display the menu. TV Input Press the ENTER button to select “Input”. Source List : TV √ √ Edit Name √ √ Move Enter Return 2. Press the ENTER button to select “Source List”. TV Source List Press the … … or † † button to select signal source, then press the ENTER TV button. AV1 : ------ ➢ W
Summary of the content on the page No. 18
AA68-03871A-00Eng 7/18/06 6:07 PM Page 18 Picture Control Using Automatic Picture Settings Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, “Custom”) that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu. TV Picture 1. Press the MENU button to display the menu. Mode : Dynamic √ √ Press the … … or † † button to select “Picture”, then press the ENTER button. Size : 16:9 √ √ Digital NR : On √ √
Summary of the content on the page No. 19
AA68-03871A-00Eng 7/18/06 6:08 PM Page 19 Changing the Screen Size You can select the picture size which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. TV Picture Press the … … or † † button to select “Picture”, then press the ENTER button. √ √ Mode : Dynamic √ √ 2. Press the … … or † † button to select “Size”, then press the ENTER button. Size : 16:9 √ √ Digital NR : On √ √ Tilt : 0 √ √ Film Mode : Off Move Enter Return 3. Press the … … or † † bu
Summary of the content on the page No. 20
AA68-03871A-00Eng 7/18/06 6:08 PM Page 20 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1. Press the MENU button to display the menu. TV Picture Press the … … or † † button to select “Picture”, then press the ENTER button. Mode : Dynamic √ √ 2. Press the … … or † † button to select “Digital NR”, then press the ENTER Size : 16:9 √ √ button.
