Summary of the content on the page No. 1
COLOUR
TELEVISION
SP42W4/42W5
SP43T6/43T7/43T8/43W6
SP47Q7/47W1/47W3
SP48T6
SP52Q7
SP54T6/54T8
SP55W3
SP62T6/62T8
SP65W3
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE
TELETEXT
Summary of the content on the page No. 2
Important Warranty Information Regarding Television Format Viewing ENG Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the
Summary of the content on the page No. 3
Safety Instructions ENG Do not expose the television to extreme temperature conditions or to extreme humidity conditions. Do not expose the television to direct sunlight and other sources of heat. Do not expose the television to any liquids. Never put objects of any kind into the television, and do not place a water-containing vessel on the television. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. Do not step on
Summary of the content on the page No. 4
ENG Contents (continued) FOREWORD Important Warranty Information Regarding Television Format Viewing........ 2 Safety Instructions......................................................................................... 3 Caution .......................................................................................................... 3 CONNECTING AND PREPARING YOUR TELEVISION Control Panels..............................................................................................
Summary of the content on the page No. 5
ENG Contents USING YOUR TELEVISION Setting the External Sound............................................................................ 32 Selecting the Sound Mode (depending on the model) .................................. 33 Setting the Sleep Timer................................................................................. 34 Setting and Displaying the Current Time....................................................... 34 Switching the Television On and Off Automatically....
Summary of the content on the page No. 6
Control Panels (depending on the model) The actual configuration on your TV may be different, depending on ➢ ENG your model. ( a ) Input Source Selection ( e ) Channel Selection ( b ) Temporary Sound Switch Off ( f ) Remote Control Sensor ( c ) Menu Display ( g ) Standby & Timer Indicator ( d ) Volume Adjustment ( h ) Power On/Off 6
Summary of the content on the page No. 7
Control Panels (depending on the model) The actual configuration on your TV may be different, depending on ➢ ENG your model. ( a ) Input Source Selection ( e ) Channel Selection ( b ) Temporary Sound Switch Off ( f ) Remote Control Sensor ( c ) Menu Display ( g ) Standby & Timer Indicator ( d ) Volume Adjustment ( h ) Power On/Off 7
Summary of the content on the page No. 8
Connection Panels (depending on the model) The actual configuration on your TV may be different, depending on ➢ ENG your model. Side of the TV Front of the TV Video Input S-Video Input Auto Convergence Video Input Auto Convergence Audio Input Audio Input S-Video Input Rear of the TV Center Speaker Connectors (Option) Rear Speaker Connectors 75Ω Coaxial Connector for Aerial or Cable Network SCART Audio/Video Input/Output Audio Output 8
Summary of the content on the page No. 9
Using a Display Deck (depending on the model) ENG You can display a VCR or DVD Player, etc. by using the display deck. SP47W3/55W3/65W3 SP47W3/55W3/65W3 1 Press the symbol “ ” at the center of the display deck. 2 Hold the center of the door and lift it up in the direction of arrow till a ‘ttok’ sound sounds. 3 After placing a component you have in the display deck, hold the center of the door and pull it down. 4 Shut the door by pressing the symbol “”. SP54T8/62T8 SP54T8/62T8 1 Hold the center o
Summary of the content on the page No. 10
Infrared Remote Control ENG Power TELEVISION STANDBY TV VCR Cable DVD SET MAKE THE REMOTE CONTROL REMOTE CONTROL SETUP WORKS FOR TV, VCR, CABLE, DVD PLAYER NUMERIC BUTTONS FOR DIRECT ACCESS (CHANNEL/TELETEXT PAGE) ONE, TWO, OR THREE-DIGIT TUNER/CABLE NETWORK SELECTION TV CHANNEL SELECTION (DEPENDING ON THE MODEL)/ FASTEXT TOPIC SELECTION TELETEXT STORE (OPTION) Surround S.STD P.STD S.Mode SURROUND ON/OFF DIRECTLY SOUND MODE SELECTION SOUND EFFECT SELECTION PICTURE EFFECT SELECTION NEXT CHANNEL/
Summary of the content on the page No. 11
Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: Purchase the television Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AA” 1.5V or equivalent batteries taking care to respect the polarities: + on the battery against + on the remote control - on the batte
Summary of the content on the page No. 12
Switching Your Television On and Off ENG The mains lead is attached to the rear of your television. If you have purchased this television in the United ☛ Kingdom, refer to page 53 for further instructions on Power plug wiring. 1 Plug the mains lead into an appropriate socket. TV VCR Cable DVD SET The main voltage is indicated on the rear of the television ➣ and the frequency is 50 or 60Hz. 2 Press the “ I ” button (On/Off) on the front of the television. Result: The Standby indicator on the fron
Summary of the content on the page No. 13
Becoming Familiar with the Remote Control ENG The remote control is used mainly to: Change channels and adjust the volume Set up the television using the on-screen menu system Power The following table presents the most frequently used buttons and their functions. TV VCR SET Cable DVD Button Viewing Function Menu Function Used to display the next stored channel. P Used to display the previous stored channel. to Used to display the corresponding channels. TV Surround S.STD P.STD S.Mode -/--/-
Summary of the content on the page No. 14
Plug and Play Feature ENG When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the television is in Standby mode, press the Power ( ) button on the remote control. English Result: The message Plug & Play is displayed. It flickers for ЬА a little while and then Language menu is automatically Hrvatski displayed. Čeština Netherland 2 Select the appropriate language by pressing the or
Summary of the content on the page No. 15
Plug and Play Feature ENG If you want to reset this feature... 1 Press the Menu button. Result: The main menu is displayed. 2 Press the or button to select Function. Result: The options available in the Function group are displayed. 3 Press the button. 4 Press the or button to select Plug & Play. Press the button. Result: This feature starts with the message Plug & Play is displayed. 15
Summary of the content on the page No. 16
Viewing the Demonstration ENG To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. Menu Video 1 Press the Menu button. Result: The main menu is displayed. 2 Press the or button to select Function. Display P.Size Result: The options available in the Function group are displayed. 3 Press the button. 4 Press the or button to select Demonstration. Press the button. Result: Each of the menu options is displayed in turn. When you wish
Summary of the content on the page No. 17
Adjusting Convergence ENG If the color appears spread out or “smeared” on the screen, the convergence probably needs alignment. Be sure to use the remote control for the convergence adjustments. (The Convergence Adjustment can not be made by using the control buttons on the front panel.) 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Function. Result: The options available in the Function group are displayed. 3 Press the button. 4 Press the or
Summary of the content on the page No. 18
Storing Channels Automatically ENG You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the Menu button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. 3 Pres
Summary of the content on the page No. 19
Sorting the Stored Channels ENG This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep. 1 Press the Menu button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the button. 4 Press the or button to select Sort. Press the button. Result: The Sort menu is disp
Summary of the content on the page No. 20
Storing Channels Manually ENG You can store up to 100 television channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found The programme number of each stored channel which you wish to identify 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. 3 Press the button. 4 Press the
