Summary of the content on the page No. 1
4-095-707-13 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
FR
Mode d’emploi
• Avant de faire fonctionner cet appareil, lisez attentivement le présent
mode d’ emploi et conservez-le pour toute référence ultérieure.
PR
('
& " & % $
#"!
,
•
+$* # )$(
AR
7,('
,6 :,98% 76,& 3 "5,
$
Summary of the content on the page No. 2
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediat
Summary of the content on the page No. 3
Do not plug in too many appliances to the same To prevent fire or shock hazard, do not expose the power socket. Do not damage the power cord. TV to rain or moisture. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned Install the TV on a stable TV stand and floor which off, it is still connected to the AC power source can support the TV set weight. Ensure that the TV (mains) as long as the power cord is plugged in. stand surface is flat and its ar
Summary of the content on the page No. 4
x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. Note • Use only the supplied screws. Use of other screws may damage the TV. 4 01GB02WAR-MIX.p65 4 20/8/03, 5:5
Summary of the content on the page No. 5
Table of Contents Installation Additional Information Getting Started ..................................... 6 Connecting the TWEETER (KV-HW21M85 only)......................... 23 Setting up your TV (“Initial Setup”) .................................... 7 Connecting the 3D WOOFER (KV-HW21M83 only)......................... 24 Connecting optional components ... 24 Overview of Controls Troubleshooting ................................. 26 TV top control, front and Specifications .....................
Summary of the content on the page No. 6
b b Installation x Getting Started 1 Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components (see page 24). Step 3 Plug in the power cord, then press ! on the TV to turn it on. Note • The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not
Summary of the content on the page No. 7
Installation x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically and adjust the picture position using the buttons on the top control panel. Tip • The MENU, and V/v/B/b buttons on the remote control can also be used for the operations below. Press 2 +/– to select the desired menu 1 language, then press t. The selected menu language appears. Press 2 +/– to
Summary of the content on the page No. 8
Overview of Controls x TV top control, front and rear panels TV top control panel PROG SOUND MODE MENU 09 8 7 6 TV rear panel qg qh R L 1 1 TV front panel Y Y CB CB 2 (MONO) L L (MONO) (MONO) L L (MONO) CR CR R R R R L (MONO) R 5 4 32 qf qd qs qf qd qs 1 qa qa Button/Terminal Function Page 1 ! Turn off or turn on the TV. 6 2 Remote control sensor. – 3 Wake Up indicator. 19 3 1 Standby indicator. 6 4 i Headphone jack. – 5 t2 Video input terminal 2. 24 6 PROG +/– Select program number. – 7 2 +/– A
Summary of the content on the page No. 9
Overview of Controls x Using the remote control and basic functions 0 qa 1 qs A/B 2 qd 1 2 3 4 6 5 qf 7 8 9 0 3 PROG qg 4 5 qh MENU qj 6 qk 7 8 ql 9 w; TV wa Button Description Page 1 ?/1 Turn off temporarily or turn on the TV. – 2 a Display the TV program. – 3 Jump to previous program number. – 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 9 Change the picture size: – “On” (16:9 wide-mode), “Off”. 0 Display on-screen information. – qa Mute the sound. – qd t Select TV or video i
Summary of the content on the page No. 10
continued Button Description Page ql Select sound mode options with a 5-Band Graphic 11 Equalizer display. w; Select picture mode options. 11 Menu operations 6 MENU Display or cancel the menu. 15 7 Confirm selected items. 15 qk V, v, B, b Select and adjust items. 15 Timer operations qg Set TV to turn on automatically. – qh Set TV to turn off automatically. – Teletext operations (green label) (KV-HW21M85/HW21M81 only) 4 , Display the next or previous page. 12 8 Display Teletext broadcast. 12 0 Re
Summary of the content on the page No. 11
Advanced Operations x Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Personal” option. Selecting the picture mode Press to select the desired picture mode. A/B Select To view 1 2 3 “Dynamic” high contrast pictures. 4 5 6 7 8 9 “Standard” normal pictures. 0 PROG “Soft” mild pictures. “Personal” the last adjusted picture setting from the “Picture Adjustment” MENU option in the menu (see page 16). TV Selecting the soun
Summary of the content on the page No. 12
x Viewing Teletext B KV-HW21M85/HW21M81 only Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. To Do this display a Teletext Press . Each time you press , the page on the screen changes as follows: A/B TV picture Teletext t Teletext and TV t TV. 1 2 3 If there is no Teletext broadcast, “100” is 4 5 6 displayed at the top left corner of
Summary of the content on the page No. 13
Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Return icon Picture icon Name of the current Setup Sound icon menu Language: English Timer icon Picture Rotation Menu level 3 Wide Mode: Channel Setup icon Video Label Setup icon Color System: Menu level 2 Portable Audio Mode: Menu level 1 Select Confirm End User Guidance Level 1 Level 2 Level 3/Function Page 16 “Picture” “Mode”
Summary of the content on the page No. 14
continued Level 1 Level 2 Level 3/Function Page 19 “Timer” “Sleep Timer” Set TV to turn off automatically. Set TV to turn on automatically. “Wake Up Timer” “Channel Setup” “Auto Program” Preset channels automatically. 20 Preset channels manually. “Manual Program” Select the TV system: “TV System” “B/G” t “ I” t “D/K” t “M” Label the program number. “Program Label” “Program Block” Block unwanted programs. “Setup” “Language” Change the menu language: 22 “English” t “ ”(Arabic) “Picture Rotation” A
Summary of the content on the page No. 15
How to use the menu 0 PROG Picture Press MENU to Mode: Dynamic Picture Adjustment display the menu. Color Temperature: Cool Intelligent Picture: On MENU Select Confirm End Press V or v to select the desired item. Channel Setup Auto Program Manual Program TV TV System: B/G Program Label Program Block Select Confirm End Press (or b) to Channel Setup confirm your Auto Program Manual Program selection and TV System: B/G go to the next Program Label Program Block level. Select Confirm End Other menu
Summary of the content on the page No. 16
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press MENU. 1 Make sure the “Picture” icon ( ) is Picture 2 Mode: Dynamic selected, then press . Picture Adjustment Color Temperature: Cool Intelligent Picture: On Select Confirm End Press V or v to select the desired item (e.g., “Mode”), then press . 3 Select To “Mode” choose either “Dynamic”, “Standard”, “Soft” or “Personal”* (see page 11). “Color Temperature” adjust white color tint. Choose either “
Summary of the content on the page No. 17
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press MENU. 1 Sound Press V or v to select the “Sound” 2 Mode: Dynamic icon ( ), then press . Sound Adjustment Balance Intelligent Volume: Off Surround: Off Select Confirm End Press V or v to select the desired item (e.g., “Mode”), then press . 3 Select To “Mode” choose either “Dynamic”, “Drama”, “Soft” or “Personal”* (see page 11). “Balance” Press v or B to emphasize the left speaker. Press V or b to empha
Summary of the content on the page No. 18
continued Adjusting the “Sound Adjustment” item under “Personal” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Personal” mode in the menu. Make sure that “Adjust” is selected, Adjustment: Personal 1 Adjust then press . Reset Selecting “Reset” will set your TV to the factory setting. 100 300 1k 3k 8k Select Confirm End Press B or b to select the desired sound frequency, then press V or v to 2 adjust the setting and press . The adjusted settings will b
Summary of the content on the page No. 19
x Changing the “Timer” setting The “Timer” menu allows you to set TV to turn off and turn on automatically. Press MENU. 1 Press V or v to select the “Timer” icon ( ), Timer 2 Sleep Timer: Off then press . Wake Up Timer: Off Select Confirm End Press V or v to select the desired item (e.g., “Sleep Timer”), then press . 3 Select To “Sleep Timer” set TV to turn off automatically. Press V or v to select the desired period of time (max. of 1 hour and 30 minutes), then press . “Wake Up Timer” set TV to
Summary of the content on the page No. 20
x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, select the TV system, label the program number and block unwanted programs. Press MENU. 1 Press V or v to select the “Channel Setup” Channel Setup 2 Auto Program icon ( ), then press . Manual Program B/G TV System: Program Label Program Block Select Confirm End Press V or v to select the desired item (e.g., “Auto Program”), then press . 3 Select To “Auto Program”
