Summary of the content on the page No. 1
KV-28FQ75Ucover.fm Page 0 Tuesday, May 22, 2001 10:01 AM
R
4-205-563-64
420556364
Trinitron Colour
Television
Instruction Manual
KV-28FQ75 U
KV-32FQ75 U
© 2000 by Sony Corporation Printed in UK
Summary of the content on the page No. 2
KV-28FQ75Ucover.fm Page 1 Tuesday, May 22, 2001 10:01 AM NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 13 AMP fuse approved by ASA ASTA or BSI to BS 1362 (i.e. marked with T or ) must be used. When an alternative type of plug is used it should be fitted with a 13 AMP FUSE, other- wise the circuit should be protected by a 13 AMP FUSE at th
Summary of the content on the page No. 3
420556364(GB) Pages 1-15.fm Page -1 Tuesday, May 22, 2001 10:02 AM
Summary of the content on the page No. 4
420556364(GB) Pages 1-15.fm Page 0 Tuesday, May 22, 2001 10:02 AM Safety Information For your safety This set is to operate on a 220-240V AC supply For environmental and safety reasons, it is Never push objects of any kind into the set as only. Take care not to connect too many recommended that the TV set is not left in this could result in a fire or electric shock. Never appliances to the same power socket as this could standby mode when not in use. Disconnect spill liquid of any kind on the
Summary of the content on the page No. 5
420556364(GB) Pages 1-15.fm Page 1 Tuesday, May 22, 2001 10:02 AM Safety Information Safety Information Always use TV stands that are strong and stable enough to support the weight and size of this TV. Due to the unique floating design of this TV, Sony highly recommend you use their designated stands, SU-28FQ1 for KV-28FQ75 model and SU-32FQ1 for KV-32FQ75 model. If this recommended option is not taken, it is vitally important to ensure that any cabinet or table has a large enough surface ar
Summary of the content on the page No. 6
420556364(GB) Pages 1-15.fm Page 2 Tuesday, May 22, 2001 10:02 AM Installation Follow steps 1-7 to install the TV and view TV programmes. 1. Checking the accessories supplied Batteries Remote control 2. Inserting batteries into the remote control Always observe the correct polarity when inserting batteries. Always remember to dispose of used batteries in an environmentally friendly way. 2
Summary of the content on the page No. 7
420556364(GB) Pages 1-15.fm Page 3 Tuesday, May 22, 2001 10:02 AM Installation 3. Connecting the TV Connecting an aerial to your TV If you are not connecting your TV to a VCR, please connect the aerial lead (as shown left) and proceed to section ‘4.Switching on the TV’. If you are connecting your TV to a VCR please refer to the section below. 1. Connect your existing aerial lead to the socket marked on the rear of the TV set. Connecting an aerial and VCR to your TV The scart lead is optional
Summary of the content on the page No. 8
420556364(GB) Pages 1-15.fm Page 4 Tuesday, May 22, 2001 10:02 AM Installation 4. Switching on the TV 1. Connect the TV plug to the mains socket (220-240V AC, 50Hz) and switch on. 2. Push in the on/off button on the front of the TV. If the standby mode indicator on the front of the TV is lit, press the TV / button on the remote control to switch on the TV set. Please be patient as the picture may take a few moments to appear on the TV screen. 5. Using the joystick Moving the joystick Pressi
Summary of the content on the page No. 9
420556364(GB) Pages 1-15.fm Page 5 Tuesday, May 22, 2001 10:02 AM Installation 6. Tuning your TV Before you tune your TV, you will be asked to set your language and country. 1. The Language/Country menu appears on the TV screen with the Language/Country word ‘English’ highlighted. Italiano Français Español English Deutsch Language 2. Press the v or V buttons on the remote control to select your Dansk Country Čeština chosen language then press the OK button to confirm. The Select Language: Con
Summary of the content on the page No. 10
420556364(GB) Pages 1-15.fm Page 6 Tuesday, May 22, 2001 10:02 AM Operation Overview of the TV set buttons Push up on the control panel (as shown) to access the front input sockets and TV buttons. The control panel drops down. Master Reset button Press to return the picture and sound levels to factory settings. The Sony logo will appear on the screen followed by the ‘Autotune’ screen. If you do not wish to retune your TV, then press the b button on your remote control. Programme Up (+) or
Summary of the content on the page No. 11
420556364(GB) Pages 1-15.fm Page 7 Tuesday, May 22, 2001 10:02 AM Operation Overview of the remote control buttons To mute sound To temporarily switch off TV Press to mute TV sound. Press again to restore the Press to temporarily switch off TV. Press again to sound. switch on from standby mode. To save energy, we recommend switching off completely when TV is not To return to TV mode in use. NOTE: After 15-30 minutes without a TV Press to return to the normal operation from teletext signal an
Summary of the content on the page No. 12
420556364(GB) Pages 1-15.fm Page 8 Tuesday, May 22, 2001 10:02 AM Operation NexTView* * depending on availability of service NexTView is an on-screen electronic programme guide, providing you with programme information for different broadcasters. Selecting your NexTView provider Your TV set automatically selects the best NexTView provider for you. This provider is available about 30 minutes after the channel tuning. You can however change this selection of provider if you wish. 1. Press the
Summary of the content on the page No. 13
420556364(GB) Pages 1-15.fm Page 9 Tuesday, May 22, 2001 10:02 AM Operation NexTView Using the ‘Long Info’ menu With this ‘Long Info’ menu screen, you can set timers or record selected programmes. 1. Press v or V to select a future programme in the programme list column. 2. Press the OK button to display the ‘Long Info’ menu on the TV screen. To set the timer Press the b or B buttons to highlight the icon then press the OK button repeatedly to ‘set the timer’ or ‘cancel the timer’. If you ch
Summary of the content on the page No. 14
420556364(GB) Pages 1-15.fm Page 10 Tuesday, May 22, 2001 10:02 AM Operation Teletext Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors. Switching Teletext on and off TELETEXT TELETEXT Index Programme 25 News 153 Sport 101 1. Select the TV channel which carries the teletext service you want to view.
Summary of the content on the page No. 15
420556364(GB) Pages 1-15.fm Page 11 Tuesday, May 22, 2001 10:02 AM Operation Teletext Using the Teletext menu 1. With Teletext switched on, press the MENU button on the remote control to display the menu on the TV screen. 2. Press v or V to select your chosen item on the screen then press B to display the relevant Teletext sub menu. Top / Bottom / Full Text Clear 3. To remove the Teletext menu from the screen, press the MENU button. Reveal Time Page Page Overview Top/Bottom/Full Select: Ent
Summary of the content on the page No. 16
420556364(GB) Pages 1-15.fm Page 12 Tuesday, May 22, 2001 10:02 AM Operation Using Multi PIP Multi PIP (picture in picture) mode displays a succession of 12 still pictures and a 13th that is live. You can manually select which channel you wish to watch, either full-screen or in the PIP mode. 1. Press the button on the remote control to select Multi PIP mode. 13 programme positions appear on the screen with the current channel in the centre. 03 04 05 2. Press the PROGR+/- buttons repeatedl
Summary of the content on the page No. 17
420556364(GB) Pages 1-15.fm Page 13 Tuesday, May 22, 2001 10:02 AM Operation Using the TV menu system The TV consists of a menu system which is based on a series of user friendly on-screen displays and menus. These displays will help you get the most from your TV, helping you to change picture and sound settings, to alter the size of the TV picture and to rearrange the TV channels etc. Adjusting the picture and sound The picture and sound are preset at the factory. You can however adjust them
Summary of the content on the page No. 18
420556364(GB) Pages 1-15.fm Page 14 Tuesday, May 22, 2001 10:02 AM Using the TV menu system: Sound Control Personal Vocal Audio Adjustment Jazz Rock Equaliser Mode Item Effect/Operation Equaliser Adjustment 0 Balance Off Equaliser Mode V Personal Loudness Off Space Vocal Auto Vol. Control Off NICAM Dual Sound Stereo Jazz Volume NICAM Stereo Dual Sound Rock Select Mode : Confirm: OK Pop v Flat (fixed setting, cannot be adjusted) Equaliser Adjustment Equaliser adj
Summary of the content on the page No. 19
420556364(GB) Pages 1-15.fm Page 15 Tuesday, May 22, 2001 10:02 AM Using the TV menu system: Using the Features menu 1. Press the MENU button on the remote control to display the menu on the TV screen. Features 2. Press the v or V buttons to select for the ‘Features’ menu then press B to enter the Off Auto Format On ‘Features’ menu. Format Correction Sleep Timer Off 3. Press the v or V buttons to select the desired menu item then press B to confirm. For a Off Parental Lock description of t
Summary of the content on the page No. 20
420556364(GB) Pages 16+.fm Page 16 Tuesday, May 22, 2001 10:03 AM Using the TV menu system: Re-arranging the TV channels After tuning the TV, you can use this feature to change the order of the channels on the TV. Set Up 1. Press the MENU button on the remote control to display the menu on the TV screen. Auto Tuning Programme Sorting Select NexTView - - - - - AV Preset 2. Press the V button to select the symbol on the menu screen then press B to enter the ‘Set Manual Set Up Up’ menu. Sel
