Summary of the content on the page No. 1
Operating Instructions
Multi-Function Printer
Model No. DP-MB350
Do NOT connect the unit to a computer with the USB cable until prompted to do so during the
setup of Multi-Function Station (CD-ROM).
12
L This unit is compatible with Caller ID. You must subscribe to the appropriate service offered
by your service provider/telephone company.
Summary of the content on the page No. 2
Thank you for purchasing a Panasonic product. You can select the English or Spanish language. The display and reports will be in the selected language. The default setting is English. If you want to change the setting, see feature #110 on page 58. Caution: L Do not rub or use an eraser on the printed side of the recording paper, as the print may smear. Notice for product disposal, transfer, or return: L This product can store your private/confidential information. To protect your privacy/con
Summary of the content on the page No. 3
Important Information Im 1F Imp p or o o a r rtts a asi n nt In t In stan fo foce r rm m , pl a attio io ea n nse contact an authorized Panasonic dealer. them, open the drum cartridge protective bag. The drum cartridge contains a photosensitive drum. For your safety Exposing it to light may damage the drum. Once you Laser radiation have opened the protective bag: – Do not expose the drum cartridge to light for The printer of this unit utilizes a laser. Use of more than 3 minutes. controls o
Summary of the content on the page No. 4
Important Information L Do not cover slots or openings on the unit. Inspect the air circulation vents regularly and remove any dust build-up with a vacuum cleaner (1). 1 Illegal copies L It is unlawful to make copies of certain documents. Copying certain documents may be illegal in your Routine care country. Penalties of fines and/or imprisonment may L Wipe the outer surface of the unit with a soft cloth. Do be imposed on those found guilty. The following are not use benzine, thinner, or
Summary of the content on the page No. 5
Table of Contents 1. Table of Contents Receiving Faxes 1. Introduction and Installation 6.6 Receiving a fax automatically – Auto answer Accessories ON................................................................47 1.1 Supplied accessories .................................... 7 6.7 Receiving a fax manually – Auto answer OFF 1.2 Accessory information................................... 7 .....................................................................48 Finding the Controls 6.8 Displaying
Summary of the content on the page No. 6
Table of Contents Troubleshooting 11.3 When a function does not work ................... 85 12.Paper Jams Jams 12.1 Recording paper jam ................................... 94 12.2 Document jams (Automatic document feeder) .................................................................. 100 13.Cleaning Cleaning 13.1 Cleaning the white plates and glass.......... 101 13.2 Cleaning the document feeder rollers........ 102 14.General Information Printed Reports 14.1 Reference lists and reports .....
Summary of the content on the page No. 7
1. Introduction and Installation 1 A 1F c Int or ce r a sso os dsi urc st ies tian once an , pl d Iea nst se c allao tin on tact an authorized Panasonic dealer. 1.1 Supplied accessories 1.2 Accessory information Accessories for this unit can be ordered online, by fax, or 1 Toner cartridge 2 Drum cartridge by telephone. *1 (DQ-DCB020) To ensure that the unit operates properly, we recommend the use of Panasonic toner cartridge and drum cartridge. ■ Replacement accessory – Toner cartridge L Mode
Summary of the content on the page No. 8
1. Introduction and Installation Finding the Controls O{Flash} L To access special telephone services or for 1.3 Button descriptions transferring extension calls. P{Tone} AB CD EF G H L To change from pulse to tone temporarily during dialing when your line has rotary/pulse service. Q{Start} L To copy a document (page 36). L To scan a document (push scan) (page 31). L To send a fax (page 42). *1 See page 9 for details. IJKLMNOP Q A{Copy} L To switch to copy mode (page 19, 36). B{Scan} L To swit
Summary of the content on the page No. 9
1. Introduction and Installation 1.4.1 Display and buttons 1.4 Display descriptions The following buttons can be used to navigate through operations or to select items shown on the display. A B C AB Copy Basic Copies 01 Zoom 100% Contrast Resolution Text/Photo C D Page Layout Disabled A{Advance} Select Menu. Copy: L To change the display between basic and advanced feature modes. D L To change the feature settings during operation. B{Set} A Feature mode L To store a setting during programming.
Summary of the content on the page No. 10
1. Introduction and Installation 1.5.2 Rear view 1.5 Overview 1.5.1 Front view A 4 5 1 2 3 B 6 C k 7 j D E F H G A Telephone line jack B External telephone jack 8 9 C Speaker D USB interface connector 1 ADF (Automatic Document Feeder) cover E Power switch 2 Document guides F LAN interface connector 3 Document tray L 10Base-T/100Base-TX 4 Document exit G LED 5 Document cover H Power inlet 6 Document entrance 7 Left cover 8 Left cover open lever 9 Standard input tray j Recording paper exit L The
Summary of the content on the page No. 11
1. Introduction and Installation Installation L Do not touch or scratch the black drum or toner surfaces. 1.6 Toner cartridge and drum cartridge The supplied toner cartridge is a starter toner cartridge. 3 Caution: L Read the following instructions before you begin installation. After you have read them, open the drum cartridge protective bag. The drum 4 cartridge contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protective bag: – Do not ex
Summary of the content on the page No. 12
1. Introduction and Installation 6 Hold the left cover release lever (9), and then pull 7 Install the drum and toner unit (l) by holding the open the left cover (j). center handle. L Make sure that the arrows (m) match to install the drum and toner unit correctly. l 9 m j k Caution: L During or immediately after printing, the fuser unit (k) gets hot. Wait until 8 Close the left cover. the fuser unit cools down. When to replace the toner cartridge and the drum cartridge When the display show
Summary of the content on the page No. 13
1. Introduction and Installation – “Change Supplies Toner Low” – “Change Supplies Toner Empty” Note: L To check the drum life and quality, please print the printer test list (page 103) and refer to page 105 for information on the drum life. If printing quality is still poor or “Replace Drum” appears on the display, replace the toner cartridge and drum cartridge. L To ensure that the unit operates properly, we recommend the use of Panasonic toner cartridge and drum cartridge. See page 7 for
Summary of the content on the page No. 14
1. Introduction and Installation 1 Pull the standard input tray (1) until it clicks into place, then pull it completely out, lifting the front part 1.7 Recording paper of the tray. The standard input tray unit can hold: 2 – Up to 520 sheets of 75 g/m (20 lb) paper. 2 – Up to 470 sheets of 80 g/m (21 lb) paper. 2 – Up to 410 sheets of 90 g/m (24 lb) paper. 2 – Up to 100 sheets of 105 g/m (28 lb) paper. *1 – Up to 25 transparencies. *1 – Up to 25 labels. *1 Only when using the unit as a printer.
Summary of the content on the page No. 15
1. Introduction and Installation Important: 5 Insert the standard input tray into the unit, lifting the L Push down to lock the plate (5) in the front part of the tray. Then push it completely into the standard input tray, if it has come up. unit. 5 4 L Make sure that the recording paper guides (6) are at the paper size mark and the recording paper is under the paper limit mark (7). The paper should not be loaded over the tab (8). 6 8 7 Note: L If the paper is not loaded correctly, re-adjus
Summary of the content on the page No. 16
1. Introduction and Installation Do not touch the plate (9) on the left side of the standard input tray. 9 Approx. 4.8 kg (10.6 lb) For assistance, please contact an authorized Panasonic dealer. 16
Summary of the content on the page No. 17
2. Preparation C 2F 2 o P or nn re a p ec s asi tra ion st tian o s an nced , pl Sea etu se c p ontact an authorized Panasonic dealer. Note: L Do not place any objects within the following 2.1 Connections distance: 3 Caution: – Left side (8): 40 cm (15 / inches) 4 L When you operate this product, the power outlet – Right side (9) and back side (j): 10 cm (4 should be near the product and easily inches) accessible. L If any other device is connected to the same telephone line, this unit may
Summary of the content on the page No. 18
2. Preparation 2.2 Turning the power switch ON 2.3 Dialing mode Turn the power switch to the ON position (1). If you cannot dial (page 42), change this setting according to your telephone line service. 1 {Menu} {Set} 1 {Menu} 2 Press {#}{1}{2}{0} to display “Dialing Mode”. 3 Press {1} or {2} to select the desired setting. {1} “Pulse”: For rotary/pulse dial service. {2} “Tone” (default): For tone dial service. 4 {Set} 5 Press {Menu} to exit. For assistance, please contact an authorized Panasonic
Summary of the content on the page No. 19
2. Preparation Document Requirements 2.4 Selecting the operation mode 2.5 Setting the original (Scan/Copy/Fax) 2.5.1 Using the scanner glass You can select the desired mode by pressing one of the following buttons. 1 2 – {Scan}: Select this mode when using the unit as a scanner (page 31). – {Copy}: Select this mode when using the unit as a copier (page 36). – {Fax}: Select this mode when using the unit as a fax machine (page 42). 1 Open the document cover (1). Note: L The default operation m
Summary of the content on the page No. 20
2. Preparation Minimum document size 2.5.2 Using the automatic document feeder 1 128 mm (5") Maximum document size 216 mm 1 (8 /2") 1 Insert the document (up to 50 pages) FACE UP into the feeder until a single beep is heard. Effective scanning area 2 Adjust the width of the document guides (1) to fit the actual size of the document. 5 4 mm ( /32") Note: L Confirm that there are no documents on the scanner glass. L Confirm that any ink, paste or correction fluid has dried completely. 5 4 mm
