Summary of the content on the page No. 1
Quick start guide (Canada version)
CL83101/CL83201/
CL83301/CL83351/
CL83401/CL83451
DECT 6.0 cordless telephone/
answering system with
caller ID/call waiting
Summary of the content on the page No. 2
Installation You must install and See page 3 for charge the battery before STOP! easy instructions. using the telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall. For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL - digital subscriber line) thr
Summary of the content on the page No. 3
Telephone base and charger installation Install the telephone base and charger as shown below. Telephone base installation Plug the large end of the power adapter into Plug one end of the a power outlet not telephone line cord controlled by a wall into a telephone jack switch. or a DSL filter. If you have DSL high-speed Internet service, a DSL filter (not included) is required. Telephone line cord Route the power adapter cord through this slot. Route the telephone line cord through th
Summary of the content on the page No. 4
Battery installation and charging Once you have installed the battery, the screen indicates the battery status. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 0 hours of continuous charging. NOTE: If you are on a phone call in low battery mode, you hear four short beeps every minute. Step 1 Step 2 Plug the battery Align the cover flat connector securely against the battery into the socket inside compartment, th
Summary of the content on the page No. 5
Quick reference guide - handset pDIR/VOLUME CHARGE indicator On when the handset is Press pDIR to show directory charging in the telephone base entries when the handset is or charger. not in use. Press to scroll up while qCID/VOLUME in menus. Press qCID to show caller ID While entering names or history when the handset is not numbers, press to move the in use. cursor to the right. Press to scroll down while in Press to increase the listening menus. volume wh
Summary of the content on the page No. 6
Quick reference guide - handset PUSH TO TAL� Press to initiate a one-to-one or one-to-group broadcast. Press and hold to broadcast to a group of system devices. Main menu Main menu • Play messages • Answering sys • Directory • Caller ID log The > symbol highlights • Intercom a menu item. • Ringers • Set date/time >Play messages • Settings Answering sys p • Website q Using menus: • Press MENU/SELECT to show the menu. • Press qCID or pDIR to scroll through menu i
Summary of the content on the page No. 7
Quick reference guide - telephone base CANCEL MENU/SELECT While in a menu, press to cancel an operation, When the telephone base is not in use, press back up to the previous menu or exit the menu to show the menu. display. While in the menu, press to confirm or save an Press and hold to go back to idle mode. entry or setting. When the telephone base is ringing, press to pDIR mute the ringer temporarily. Press to display the directory when the phone is qCID not in use. Press to display the
Summary of the content on the page No. 8
Quick reference guide - telephone base X/DELETE While reviewing the caller ID history, the directory or the redial memory, press to delete an individual entry. While predialing, press to delete digits. During message or announcement playback, press to delete the playing message or the recorded announcement. Press twice to delete all old messages when the phone is not use. in /ANSWER ON Press to turn the built-in answering system on or off. •/RECORD Press to record a memo or an announcement.
Summary of the content on the page No. 9
Telephone settings Set date/time To set the date and time manually: Ringers . When the handset or telephone base is in idle mode, press >Set date/time p MENU/SELECT to enter the main menu. q . Press qCID or pDIR to scroll to >Set date/time and then press MENU/SELECT. SET DATE 3. Press qCID or pDIR to select the month, then press MM/DD/YY MENU/SELECT, or enter the number using the dialing keys. p q 4. Press qCID or pDIR to select the day, then press MENU/SELECT, or enter the
Summary of the content on the page No. 10
Telephone operation Making a call Using a cordless handset: Elapsed time • Press PHONE/FLASH or /SPEA SPEA�ER ER � , then enter the Phone 0:00:30 telephone number. The screen displays the elapsed time as you talk (in hours, minutes and seconds). AM 8/06 6:30 Using the telephone base: Speaker 0:00:30 • Press /SPEA SPEAER �ER � , then enter the telephone number. The screen displays the elapsed time as you talk (in hours, AM 8/06 6:30 minutes and seconds). Elapse
Summary of the content on the page No. 11
Answering system operation Turn the answering system on or off Using a cordless handset: . When the handset is in idle mode, press MENU/SELECT to Play messages enter the main menu. >Answering sys p . Press qCID or pDIR to scroll to >Answering sys, then q press MENU/SELECT. 3. Press qCID or pDIR to scroll to >Answer ON/OFF, then Record memo press MENU/SELECT. >Answer ON/OFF 4. Press qCID or pDIR to highlight >On or >Off, then p q press MENU/SEL
Summary of the content on the page No. 12
Answering system operation Listen to messages at the telephone base: Press /PLAY/STOP on the telephone base to listen to the messages. The system announces the number of messages, then begins playback. Options during playback: • Press q/VOLUME/p to adjust the message playback volume. • Press /S�IP to skip to the next message. • Press /REPEAT to repeat the message. Press twice to hear the previous message. • Press X/DELETE to delete the message. • Press /PLAY/STOP to stop the playback. • Pr
Summary of the content on the page No. 13
Answering system operation Listen to messages on a cordless handset: . When the handset is in idle mode, press MENU/SELECT to >Play messages enter the main menu. Answering sys p . Press MENU/SELECT again to select >Play messages. q • If there are new and old messages, press qCID or pDIR to select >Play new msgs or >Play old msgs, then press >Play new msgs MENU/SELECT. Play old msgs • If there are only new messages, they will play automatically. Options during play
Summary of the content on the page No. 14
www.telephones.att.com © 0 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 8. Printed in China. Issue AT&T 0/ .
