Summary of the content on the page No. 1
sm
Innovation Beyond Technology
User’s Manual
Model: IP 811
Accessory Handset
8
FEATURING: Handset Speakerphone
5.GHz
Headset Compatible (2.5 mm)
Digital Spread
Spectrum
Summary of the content on the page No. 2
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water (for example, near a bath
Summary of the content on the page No. 3
Important Safety Instructions VTech Telecommunications Canada Ltd. Customer Service: www.vtechcanada.com or 1-800-267-7377. In the US, call VTech Communications, Inc. at 1-800-595-9511. BEFORE USING YOUR IP 811, CAREFULLY PEEL OFF THE PROTECTIVE FILM COVERING THE DISPLAYS. IMPORTANT: Your IP 811 is an accessory handset for use with the IP 8100-2/8100- 3 systems. You must have one of these base units in order to use the accessory handset.This manual is designed to familiarize you with the IP
Summary of the content on the page No. 4
Parts Check List 1. Handset 4. Belt Clip 2. Handset Charger 5. User’s Manual 6. Battery Pack 3. Charger Wall Mounting Bracket To purchase replacement batteries, visit us on the web at shop.vtechcanada.com or call VTech Telecommunications Canada Ltd. at 1-800-267-7377. In US, call VTech Communications, Inc. at 1-800-595-9511. NOTE: Use only VTech batteries (part number 89-1324-00-00). Handset Charger Wall Mounting Handset Charger Bracket Belt Clip Battery Pack User’s Manual
Summary of the content on the page No. 5
The Handset Layout 12 13 16 9. Speakerphone 1. Antenna 2. Earpiece 10. LCD Display 3. Volume Control 11. Select (Menu) 4. CID (Scroll Down) 12. Phonebook (Scroll Up) 5. On (Flash) 13. Headset jack (2.5mm) 14. Off (Clear) 6. Voicemail 15. Intercom 7. Dialing Keys (0-9, *, #) 16. Mute (Delete) 8. Redial (Pause) 4 811.vcan.om.eng.indd 4 10/27/05 11:16:23 AM
Summary of the content on the page No. 6
Setup Connecting Power to Handset Charger Because the IP 811 is an accessory handset to the IP 8100-2/8100-3 all you need to do is choose the location for your handset charger and plug in the power supply into an electrical outlet. CAUTION: Use only the VTech power supply provided with your telephone. Installation of Battery Pack 1. Remove battery compartment cover by pressing on the indentation and sliding downward. 2. Place the new battery pack in the handset with the positive a
Summary of the content on the page No. 7
Setup Charging of the Handset Battery The handset of your cordless telephone is powered by a rechargeable battery. It charges automatically whenever the handset is in its charger. You should charge the battery for 10-12 hours when you first receive your phone. You will know the battery needs charging when: • The low battery message is displayed: • The handset seems completely dead, the LCD is com- pletely clear and does not activate when you press the keys. IMPORTANT: 1. Do not dispose of bat
Summary of the content on the page No. 8
Registration Your IP 811 is an accessory handsets for use with the IP 8100-2/8100-3 base unit. To register your IP 811 for the first time: 1. After charging the battery, the screen will display: ENTER BASE 2. Enter the 15 digit base unit ID code, located on the underside of your IP 8100-2/8100-3 base. If you make a mistake, press the DELETE key to backspace (delete characters), then enter the correct information. 3. Press SEL to complete the registration process. SEARCHING... 4. Once a val
Summary of the content on the page No. 9
Handset Indicators Handset Icons Icon Description MUTE • Turns on when the microphone is muted. NEW • Turns on when there are new call log entries. • Turns on when the ringer is muted. • Low battery indicator and charging indicator. Handset LEDs LED Description • LED is on when in handsfree mode. SPEAKER 8 811.vcan.om.eng.indd 8 10/27/05 11:16:28 AM Basic Operation
Summary of the content on the page No. 10
Headset Operation Headset Operation Your IP 811 handset is equipped with a 2.5mm headset jack for use with an optional ac- cessory headset for handsfree conversations. If you choose to use the headset option, you must obtain an optional accessory headset that is compatible with the IP 811. To purchase a headset, visit us on the web at shop.vtechcanada.com or call VTech Customer Service at 1-800-267-7377. Once you have a compatible 2.5mm headset, locate the headset jack on the IP 811 handset.
Summary of the content on the page No. 11
Maintenance Taking Care Of Your Telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install your base unit near a sink, bathtub or shower. Electrical storms
Summary of the content on the page No. 12
In Case Of Difficulty The Phone Doesn’t Work At All • Make sure the power cord is plugged in. • Make sure the Ethernet cable is plugged firmly into the base unit and the broad- band connection. • Make sure the batteries are properly charged. If you get a LOW BATTERY mes- sage or indication, the batteries need charging. No Dial Tone • First check all the suggestions above. • Please refer to the Troubleshooting section of the Base Unit Features Manual of IP 8100-2/ 8100-3. You Get Noise, Static, O
Summary of the content on the page No. 13
Warranty Statement What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications, warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the product and all accessories provided by VTech in the sales package (“Product”) are free from material defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with operation instructions, This limited warranty
Summary of the content on the page No. 14
Warranty Statement How do you get warranty service? • To obtain warranty service in the United States of America, call 1- 800-595- 9511 for instructions regarding where to return the Product. Before calling for service, please check the user’s manual. A check of the Product controls and features may save you a service call. • Except as provided by applicable law, you assume the risk of loss or damage dur- ing transit and transportation and are responsible for delivery or handling charge
Summary of the content on the page No. 15
FCC, ACTA, and IC Regulations This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS-03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any inter- ference, including interference that may cause undesired operation of the device. A label is located on the underside of the base
Summary of the content on the page No. 16
FCC, ACTA, and IC Regulations Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Notice: The Ringer Equivalence Number (REN) for this term
Summary of the content on the page No. 17
Technical Specifications FREQUENCY CONTROL SIZE Crystal controlled Handset: 182mm x 55.3mm x 40mm PLL synthesizer (including antenna) Charger: 76.5mm x 79.4mm x 45.2mm TRANSMIT FREQUENCY Base: 5725 - 5850 MHz WEIGHT Handset: 2400 - 2483.5 MHz Handset: 146 grams (excluding Battery) RECEIVE FREQUENCY Charger: 225 grams Base: 2400 - 2483.5 MHz Handset: 5725 - 5850 MHz POWER REQUIREMENTS CHANNELS Handset: 3.6V @ 600mAh NiMH Charger: 9 V DC @ 150mA 95 Channels MEMORY NOMINAL EFFECTIVE RANGE Phone
Summary of the content on the page No. 18
Table Of Contents IMPORTANT SAFETY INSTRUCTIONS .......................................................... 1 Parts Check List ........................................................................................... 3 The Handset Layout ..................................................................................... 4 GETTING STARTED ......................................................................................... 5 Set Up .........................................................
Summary of the content on the page No. 19
Congratulations on your purchase of this VTech product NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free: 1-800-595-9511 In Canada, Call: 1-800-267-7377 or visit our website at www.vtechcanada.com 811.vcan.om.eng.indd 18 10/27/05 11:16:32 AM
Summary of the content on the page No. 20
VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon, 97008 Distributed in Canada by VTech Telecommunications Canada Ltd., Richmond, B.C. V6X 1Z9. Copyright © 2005 for VTECH TELECOMMUNICATIONS LTD. Printed in China 91-000296-010-000 ISSUE 0 811.vcan.om.eng.indd 19 10/27/05 11:16:32 AM
