Summary of the content on the page No. 1
Congratulations
on purchasing your new VTech product.
Before using this telephone, please read the
Important safety instructions
on page 48 of this manual.
This manual has all the feature operations and troubleshooting necessary to install
and operate your new VTech telephone. Please review this manual thoroughly to
ensure proper installation and operation of this innovative and feature rich VTech
product. For support, shopping, and everything new at VTech, visit our website at
www.vtechph
Summary of the content on the page No. 2
Table of contents Installation . . . . . . . . . . . . . . . . . . 1 Basic operation . . . . . . . . . . . . . . 17 Parts checklist . . . . . . . . . . . . . . . .1 Make, answer and end calls . . . . . . . . 17 Telephone base & charger installation . . . .2 Speakerphone . . . . . . . . . . . . . . . 17 DSL filter . . . . . . . . . . . . . . . . . . . 3 Mute. . . . . . . . . . . . . . . . . . . . . 17 Battery installation . . . . . . . . . . . . . .4 Call waiting . . . . . . . . . . . . . .
Summary of the content on the page No. 3
Table of contents Character chart . . . . . . . . . . . . . . . 24 Handset indicators . . . . . . . . . . . . 36 Search the directory . . . . . . . . . . . . 25 Telephone base indicators Dial a directory entry . . . . . . . . . . . . 25 & charger indicator . . . . . . . . . . . 37 Edit a directory entry . . . . . . . . . . . . 26 Battery . . . . . . . . . . . . . . . . . . . 38 Delete from the directory . . . . . . . . . . 26 Troubleshooting . . . . . . . . . . . . . . 39 About caller ID
Summary of the content on the page No. 4
Basic operation Installation Installation Parts checklist Your telephone package contains the following items. Save your sales receipt and • To purchase original packaging in the event warranty service is necessary. replacement batteries, visit our website at www. vtechphones.com or call at 1 (800) 595-9511 in the United States. In Canada, go to www.vtechcanada. User’s manual Quick start guide com or call Handsets Telephone base 1 (800) 267-7377. (2 for DS3111-2/
Summary of the content on the page No. 5
Installation Telephone base & charger installation We recommend that you install the telephone base away from any electronic • Use only the equipment and appliances such as personal computers, computer routers, VTech batteries and power television sets, microwave ovens, and refrigerators. Avoid excessive heat, cold, adapters supplied dust or moisture. When a location is selected, install the telephone base and the with this telephone. charger as shown below. The telephone base is designe
Summary of the content on the page No. 6
Basic operation Installation Installation DSL filter (not included) If you subscribe to Digital Subscriber Line (DSL) high-speed Internet service through your telephone line, you must have a DSL filter between the telephone base and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Connect to a standard electrical outlet not controlled by a wall switch DSL f
Summary of the content on the page No. 7
BT8000/ BT6010 Installation Battery installation Install the handset battery by following these steps: • If the handset will not be used 1. Press the tab and slide the battery compartment cover down. for a long time, 2. Align the two holes of the battery plug with the socket pins in the handset battery disconnect the compartment, matching the red and black wires of the color-coded label. battery to avoid potential damage. 3. Place the battery in the compartment with the wires in the lower
Summary of the content on the page No. 8
Basic operation Installation Installation Battery charging The battery may have enough charge for short calls. For best performance, • Use only the charge the battery for at least 16 hours before use. When the battery power is low, power adapters LOW BATTERY will be displayed and the battery indicator will flash on the and batteries (or equivalent) handset screen. When fully charged, the handset battery provides approximately supplied with your eight hours of talk time and fo
Summary of the content on the page No. 9
Installation Adding a new handset Your telephone can accomodate up to five cordless handsets. You can add new • If the registration handsets (DS3101, purchased separately) to the DS3111-2/TM3111-2/DS3111- is not successful, the display 3/DS3111-4 at any time, but each handset must be registered with the telephone will show NOT base before use. REGISTERED. To The DS3111-2/TM3111-2/DS3111-3/DS3111-4 comes with two/three/four registered reset the handset, remove the handsets (named HANDSET
Summary of the content on the page No. 10
Basic operation Installation Installation remove the handset and place it in the telephone base PLEASE WAIT... or charger again. • If you experience 2. On the telephone base, press and hold FIND HANDSET difficulty for about four seconds (until the red IN USE light on the registering a handset, see the telephone base turns on) and then release the button. HANDSET X Troubleshooting The handset will show PLEASE WAIT... and it will take REGISTERED section on about 10 seconds to complete t
Summary of the content on the page No. 11
Installation Replacing a handset When you are replacing rather than adding a handset, for your handsets to be • If the de- numbered sequentially, you need to delete all the handset registrations on the registration process is not telephone base, then register all handsets again. successful, you To de-register all handsets may need to reset the system 1. Press and hold FIND HANDSET on the telephone base for and try again. about 10 seconds (until the IN USE light on the telephone To rese
Summary of the content on the page No. 12
Basic operation Installation IC:xxxxX-xxxxxxxx FCC ID: XXxxx-xxxx-xx IC:xxxxX-xxxxxxxx FCC ID: XXxxx-xxxx-xx IC:xxxxX-xxxxxxxx FCC ID: XXxxx-xxxx-xx IC:xxxxX-xxxxxxxx FCC ID: XXxxx-xxxx-xx Installation Belt clip & headset (optional) For hands-free telephone conversations, use any industry standard 2.5mm headset • To purchase a (purchased separately). For optimal results, use a VTech 2.5mm headset. headset, visit our website at www. Whenever a compatible headset is connected to the cordless ha
Summary of the content on the page No. 13
Installation Handset layout 1. Earpiece 2. MENU/SELECT SKIP (page 15) 3. Headset jack (2.5mm) (page 9) 4. CID (caller ID) (page 28) PLAY (page 15) 5. /FLASH 6. Dialing keys (0-9, *, #) 7. VOICEMAIL (page 19) (page 32) 8. REDIAL/PAUSE 9. Microphone 10. Handset display 11. VOL / (volume) (page 18) 12. (directory) (page 23) ERASE (page 15) 13. (speakerphone) (page 17) 14. OFF/CLEAR 15. #(page 29) 17 16. INT (intercom) (page 20) 17. MUTE/REMOVE (page 17) 10 www.vtechphones.com
Summary of the content on the page No. 14
Basic operation Installation Installation Telephone base layout 1. CHARGE light (page 37) 2. IN USE light (page 37) 3. VOICEMAIL light (page 37) 4. FIND HANDSET (page 19) 1 2 3 4 www.vtechphones.com 11
Summary of the content on the page No. 15
Telephone settings Ringer volume The ringer volume can be adjusted either by the volume control • The ringer will be on the right side of the handset or in the handset menu. >RINGER VOLUME off if the ringer RINGER TONE volume is set To change the ringer volume: to zero, and the VOL or VOL to display the 1. Press the volume button ringer off icon current ringer volume level on the screen when the handset will be displayed. is not in use. • If the ringer volume RINGER VOLUME 2. Press
Summary of the content on the page No. 16
Basic operation Telephone settings Telephone settings 3. Press or to choose the desired ringer tone. A sample of each ringer tone will be played when scrolling through the choices. 4. Press MENU/SELECT to save, and you will hear a confirmation tone. Key tone If the key tone is set to off, you will not hear a beep tone when you press any of the handset keys. >KEY TONE LANGUAGE 1. Press MENU/SELECT when the handset is not in use. 2. Press or to select KEY TONE, then press MENU/SELECT. KE
Summary of the content on the page No. 17
Telephone settings Clear voicemail If you subscribe to voicemail service provided by your local telephone company, NEW VOICE MAIL and the icon will appear on the handset display and the VOICEMAIL lights on the telephone base and handsets will flash when you have a new voicemail message. To turn off these indicators: 1. Press MENU/SELECT when the handset is not in use. 2. Press or to select CLR VOICE MAIL, and then press >CLR VOICE MAIL VOICEMAIL SETUP MENU/SELECT. 3. The screen displays
Summary of the content on the page No. 18
Basic operation Telephone settings Telephone settings Voicemail setup If you subscribe to voicemail service provided by your local telephone company, this feature allows you to use the VOICEMAIL, PLAY, SKIP and ERASE buttons to access your voicemail when you have a new voicemail message. Before completing these steps, be sure to have your access number >VOICEMAIL SETUP and password (provided by your local telephone company) to DIRECTORY access your voicemail. You will also need the codes t
Summary of the content on the page No. 19
Telephone settings Voicemail setup To program a pause: • A single pause (approximately 1. Press MENU/SELECT when the handset is not in use. three seconds) 2. Press or to select VOICEMAIL SETUP, then press MENU/SELECT twice. is automatically programmed 3. The blinking cursor should be at the end of your access number. Press and hold between the the REDIAL/PAUSE button until a P appears. access number 4. Press MENU/SELECT. You will hear a confirmation tone. and the password when you To
Summary of the content on the page No. 20
Basic operation Basic operation Make, answer and end calls • To make a call, press /FLASH or , then dial the number. • The screen -OR- displays the elapsed time Dial the number, and then press /FLASH or (predial). as you talk (in • To answer a call, press /FLASH, or any dialing keys (0-9, hours, minutes #, ). and seconds). * • While entering • To end a call, press OFF/CLEAR, or put the handset in the a number to dial telephone base or charger. before Speakerphone /FLASH or
