Summary of the content on the page No. 1
Summary of the content on the page No. 2
Contents Welcome/Accessibility...................................................2 Tone Dialing Switch-over.............................................25 Caller.ID.and.CIDCW.(Caller.ID.on.Call.Waiting).......26 Terminology/Manual.Conventions................................3 Caller ID on Call Waiting (CIDCW) ................................... 27 Product.Overview...........................................................4 Viewing the Caller ID Message List .................................. 27 C
Summary of the content on the page No. 3
Welcome Congratulations on your purchase of the Uniden cordless telephone. This cordless phone is designed for reliability, long life, and outstanding performance. Note:.Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this. manual.may.differ.from.the.actual.unit..The.color.of.your.cordless.telephone.may.vary. ® Uniden is a registered trademark of Uniden America Corporation. AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America Corporati
Summary of the content on the page No. 4
Terminology Base The main part of the phone that connects to your phone line and lets you make and receive calls. Caller ID is available from your telephone provider. With this service, you can see the name and number CID of incoming callers. Caller ID on Call Waiting is available from your telephone provider. With this service, you can see CIDCW incoming caller information while on another call. Handset A cordless handset that can be placed anywhere in your home or office where AC power is av
Summary of the content on the page No. 5
Product.Overview Main.Phone.Features • 2.4 GHz Extended Range Technology • Tone/Pulse Dialing • Caller ID/Caller ID on Call Waiting • Page/Find Handset Key • 3-Line Backlit LCD • Earpiece/Ringer Volume Controls • Trilingual Menu Displays (English, Spanish, or French) • Mute or Turn Ringer Off • 30 Caller ID Memory • Hearing Aid Compatible • 0 Number Memory Dialing • 20-Channel Auto Scan • Last Number Redial • Desk or Wall Mountable Answering.Machine.Features • Digital Tapeless Recording • Time
Summary of the content on the page No. 6
Controls.and.Functions Handset . Handset antenna 11 2. Handset battery compartment 3. Handset earpiece 4. LCD display 33 5. [vol/ / / ] (volume & ringer up/down) key 6. [cid/menu] key 44 7. [ /tone/ ] (left cursor) key 8. [redial/pause] key 55 9. [select/remote] key 10 10 0. [memory] key 66 11 11 . [end] key 12 12 2. [talk/flash] key 3. [#/ ] (right cursor) key 4. [delete/channel] key 22 5. Handset ringer speaker 77 13 13 6. Handset microphone 88 14 14 7. Handset cha
Summary of the content on the page No. 7
Main.Base.Unit 8. Base speaker 20 2021 2122 22 23 23 24 24 9. Base charging contacts 20. [menu/clock] key 2. [set] key 22. Message counter LED 18 18 23. Main Base antenna 24. charge/in.use LED 25 25 25. [vol/select/ / ] (volume/select up/down) key 26. [ ] (play/stop) key 26 26 19 19 27. [ ] (delete) key 27 27 28. [ ] (skip/fast forward) key 28 28 29. [ ] (answer on/off) key 30. [ ] (repeat/rewind) key 3. Mic (microphone) 32. [ringer] key 29 29 30 30 31 31 32 32 33 33 34 34 35 35 33. [memo] k
Summary of the content on the page No. 8
Installing.the.Phone Choosing.the.Best.Location Before choosing a location for your new phone, here are some important guidelines you should consider: A Avoid heat sources, such as radiators, void heat sources, such as radiators, A Avoid noise sources such as a window by void noise sources such as a window by air ducts, and sunlight air ducts, and sunlight a street with heavy traffic a street with heavy traffic A Avoid television sets and other void television sets and other A Avoid microwave ov
Summary of the content on the page No. 9
Installing.the.Rechargeable.Battery.Pack.into.the.Handset The handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base unit. To install the rechargeable battery pack: 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The
Summary of the content on the page No. 10
Installing.the.Base.Unit ) Connect the AC adapter to the DC.IN.9V jack and to the standard 20V AC wall outlet. Note:. •..Use.only.the.supplied.AD-314.AC.adapter..Do.not.use. any.other.AC.adapter. •..Do.not.place.the.power.cord.where.it.creates.a.trip. hazard.or.where.it.could.become.chafed.and.create.a. fire or electrical hazard. 2) Charge the handset by placing in the base unit with the keypad facing forward. 9
Summary of the content on the page No. 11
3) Make sure that the charge/in.use LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base's charging contacts. Note:. •..Connect.the.AC.adapter.to.a.continuous.power.supply.(not. controlled.by.a.wall.switch). •..Place.the.base.unit.close.to.the.AC.outlet.to.avoid.long. extension.cords. •. Charge.your.handset.at.least.15.-.20.hours.before.plugging.into. the.phone.line.. 4) Once the handset battery pa
Summary of the content on the page No. 12
Mounting.the.Base.Unit.on.a.Wall Standard.wall.plate.mounting This phone can be mounted on any standard wall plate. 1 ) Snap the wall mount adapter into the notches on the base top. 2) Plug the AC adapter to the DC.IN.9V jack. 3) Plug the AC adapter into a standard 20V AC wall outlet. 4) Plug the telephone line cord into the TEL.LINE jack. 2 4 5) Route the telephone line cord through the groove as shown. 6) Plug the telephone line cord into the telephone outlet. 5 7 7) Align the mounting slot
Summary of the content on the page No. 13
Direct.wall.mounting If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #0 screws
Summary of the content on the page No. 14
Basic.Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. Activating.AutoTalk AutoTalk will allow you to answer the phone simply by removing the handset from the base. You do not have to press a key to answer the incoming call. To activate: ) When the phone is in standby, press and hold [cid/menu]. The following screen appears. 2) Press [select/remote] to turn AutoTalk on. 3) Press [end] or return t
Summary of the content on the page No. 15
2) Press [vol/ / ] to move the pointer to select CIDCW. 3) Press [select/remote] to toggle and turn on Caller ID on Call Waiting. 4) Press [end] and return the handset to the base unit to complete the setting. The handset returns to standby. Note:.To.enable.the.setting.change.of.CIDCW,.you.need.to.return.the.handset.to.the.base.unit.when. you.complete.the.setting. Programming.Your.Area.Code In some areas the telephone company may allow you to place a local call by dialing only 7 digits (instea
Summary of the content on the page No. 16
Choosing.the.Dialing.Mode Your phone can communicate with the telephone network in two different ways: tone dialing and pulse dialing. These days, most telephone networks use a method called tone dialing, so your phone comes programmed for tone dialing by default. If your phone company uses pulse dialing, you'll need to change your phone's dial mode. There's an easy way to tell: try making a call. If your call connects, your phone's setting is fine. If not, you may need to change the dial mod
Summary of the content on the page No. 17
Setting.the.Language You can change the language the handset menu displays. Choose from English, French, or Spanish. To change the language setting: ) When the phone is in standby, Press and hold [cid/menu]. The following screen appears. 2) Press [vol/ / ] to move the pointer to select LANGUAGE. 3) Press [select/remote] to select ENG, FR. or ESP. 4) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby. 6
Summary of the content on the page No. 18
Using.the.Speed.Dial.Memory Your cordless phone allows you to store up to 0 names and numbers in the handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example is a frequently refilled prescription number. Store your pharmacy phone number in one speed dial and your most frequently refilled pre
Summary of the content on the page No. 19
4) Enter a name according to the instructions below, then press [select/remote]. If no name is required, go to step 5. • The name can be up to 3 characters. • Use [ /tone/ ] and [#/ ] to move the cursor to the desired location. • Press [delete/channel] to delete characters as needed or press and hold to delete all characters. Refer to the letters on the number keys to select the desired characters. With each press of a numeric key, the displayed character appears in the following order: uppe
Summary of the content on the page No. 20
If.you.make.a.mistake.while.entering.a.name Use [ /tone/ ] or [#/ ] to move the cursor to the incorrect character. Press [delete/channel] to erase the wrong character. Then enter the correct character. To delete all characters, press and hold [delete/channel]. 5) STORE NUMBER is displayed. The cursor flashes indicating that the phone is ready for the number to be entered. 6) Use the keypad to enter the phone number; each number can be up to 20 digits. If you need the phone to pause during
